Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lower unit drain down! Did you win or lose?


leech~~

Recommended Posts

won, I never worry too much, its an easy fix.

Well only if people remember to drain them in the fall and the housing doesn't crack! eek

I have a buddy who leaves 2 boats and a pontoon in the water all year at the dock and just pulles them out and leaves them sit. They are all older motors and I think some day he will pay for not checking it! frown

Link to comment
Share on other sites

I understand checking and draining milky water out, but to 'drain' all the oil seems a little overboard. But to each their own. smile

The cost for a quart of oil vs. the cost for a new lower unit more than makes up for draining it each year. It's the insurance factor and knowing you have good oil in there. Oil breaks down over time, and with the pressures and possible temperature extremes it goes through when in operation it can break down even faster. And unless you spend the money to have the oil lab tested each season how do you know it hasn't broken down? I'd rather spend $10 and 10 minutes of my time each year and know I will be good to go, rather than have a possibility of the oil going bad and spend $1000+ for a new lower unit.

Link to comment
Share on other sites

I admit changing my lower unit is one of my least favorite things to do, but it gets done every Fall no matter what. I just wish someone would come up with a drain plug that wasnt a dang slotted head. Those things are a royal PITA! If there is one out there that is allen head, hex or something, please share because I would love it.

BTW I was a winner again. Its amazing how much water is held in the lower unit so make sure you guys lower the motor ALL the way down to make sure the water completely drains out. I have a feeling that is what led to the pic above versus water in the oil itself.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.