Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Best portable ice house for two people


Mueller

Question

I am going to buy a portable ice shelter. I saw a Frabill Prowler GT and really liked the seats and with out any other advise I would probably buy it. Do any of you out there have any comments about other makes? Here are the criteria that I have:

only need room for two people

will be carried on the back of a pick up

needs to be comfortable (seats)

needs to be set up rather easily

must be made well

Thanks

Mueller

Link to comment
Share on other sites

Recommended Posts

  • 0

If it will be strickly out of a truck and never any towing by ATV or snowmobile I think alot of the ones mentioned above will be fine (except Otter). If you want the most durable and well built that will let you tow etc. I would spend the money and get an Otter. I have 2 close friends and we all got different brands and after 2 seasons they all wish they would have gone with the Otter like I did.

Link to comment
Share on other sites

  • 0

Fish Trap Voyaguer is tops in my book...easy set up and lots of room with very comfortable seats. I would suggest hitting up the ice fishing show at the St. Paul River Center when ever that is this year. You usually can get a really good deal with all the competition under one roof. Last year, I walked out the door with over $800 in retail for just under $500.

Link to comment
Share on other sites

  • 0

If you were going fishing most of the time with one more person I would go with the frabill If you find yourself going alone sometimes, I would look at something with a bench seat. I have a Eskimo Quick Flip III and I love it, the bench could be a little more comfortable when sitting on it, but, if you get a little tired and want to lay down it is comfortable. I have spent the night in it, fold the back rest to the flat position and there you have more space. Rods down in the water. Reminds me I am going to have to get bells for the rod tips. It was a last minute decision to spend the night on the lake. Nice and comfy.

The otter may be comfy too, or other bench seats, Eskimo is my first flip over.

Link to comment
Share on other sites

  • 0

I love my Otter Cabin. Some guys are going to reply that the Cabin's too small for their needs when out with a partner, but if you're looking for a place in which two can easily be comfortable but isn't so big that you can't handle it by yourself (they DO get heavy lifting them up into the vehicle...), the Cabin is the perfect size. Not to mention it's incredibly roomy when going solo.

Link to comment
Share on other sites

  • 0

As far as quality goes the Voyageur and Otter Lodge are some of the best out there. I use and Otter lodge for a few reasons. The tubs are darn near indestructible and I like the taller sides with up swept rake of the Otter tubs. Where Otter leaves the rest of the field behind is with its aluminum square tubbing pole system. Any new new flipover will setup fast with ease, give them a few years of service and then compare. Bent, rusted or galvanized poles that have oxidized will slow you down and have you out shopping for a new shelter. Yes Otters cost more but they should give you more years of service.

For seating I use the Otter seat brackets and bought boat seats so the skys the limit there as far as options.

I considered the bench seats and may make my own with a deeper seat and backrest that folds down for sleepy time.

Link to comment
Share on other sites

  • 0

If you are both olympic powerlifters, you might want to look at the new Fishtrap X 2 man. Looks very nice, but OMG heavy! The one man is listed at 102 lbs!! Otherwise, you can't go wrong with the Otters listed - they rock.

Link to comment
Share on other sites

  • 0

I had a fish trap guide. I liked the lightweight but I didn't like my fishing partner and I bumpin into each other and touching elbows.......ick. Also, I couldn't stand up.

I shopped and was torn between an otter and a voyager. I bought the voyager. I was a difficult decision as the otter was a little cheaper, but the voyager seemed to have thicker and tougher canvas/tarp/tent material.

Link to comment
Share on other sites

  • 0

I have a Voyager and have been very happy with it.I have hyfax on the sled and tow it with my wheeler and the bottom still looks very good after 5 years.I have also fished out of the Otter Lodge and again a very nice portable.This year I also bought a Otter.

I really think you cannot go wrong with either,but would also put the hyfax on the bottom of the tub on both.

Its a tough choice.Its more for the Otter but it may last you for a longer period of time.

Link to comment
Share on other sites

  • 0

I also had a Fish Trap Guide for a couple of years and share your same opinions on that particular model. I can remember fishing with my dad last year with a vexilar, aqua vu, and a sunflower, and it was practically impossible to get in and out of the shelter without falling down because of the ceiling height. I also agree with you 100% about the rubbing elbows bit. The worst is when you attempt to take off your jacket while sitting next to that person. I personally think it is better off used as a one person outfit. With that you also have plenty of room to haul your gear as opposed to the solo models. One of the advantages it did have was that it did fit very nicely in the back of my Blazer with all of the equipment stored in the sled. Was also very easy to get in and out the vehicle even when loaded with euipment due to it being so lighweight.

Link to comment
Share on other sites

  • 0

I have the Otter Lodge and I think this will be the sixth year of fairly heavy use. I see no reason to replace it. The sled will break. I broke one last year, but maybe I shouldn't have been pulling it 70 mph across Crow Lake. The Otter is a winner.

Link to comment
Share on other sites

  • 0

Another vote for the Otter Lodge. I picked one up at the Ice Fishing Show in St. Paul a few years back for a decent price with some accessories thrown in. Also a good place to compare all brands within walking distance of each other.

Link to comment
Share on other sites

  • 0

I have a Frabill XL Twin. Wide sled, awesome seats with beer and rod holders built in. My friends have voyaguers and guides, they can not believe how nice these new Frabills are. The new material, Artic Shield I think, is nice and thick. This gets my vote.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.