Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Be careful with propane


delcecchi

Recommended Posts

Just down the block from me.... Added excitement to evening.

Refilling 1 lb propane bottles in garage...

http://www.postbulletin.com/news/local/m...7e21621039.html

full-1100-40770-fire1.jpg

full-1100-40771-fire2.jpg

full-1100-40772-fire3.jpg

Quote:
A southwest Rochester man escaped an explosive fire triggered by a leaking propane tank Saturday night.

Calls from neighbors flooded police dispatchers at 7:55 p.m. because of the size and speed of the fire. A huge column of black smoke back lit by city lights could be seen from U.S. 63 south, said Rochester Fire Department Deputy Chief Steve Belau.

The fire erupted in the attached garage at 2526 Elmcroft Drive S.W. when the leaking propane contacted a heater in the garage as the man was working with portable propane cylinders, getting ready for an ice fishing excursion, Belau said. The flash fire quickly involved the leaking cylinder itself, accelerated by the increasing flow of propane gas.

The garage became engulfed in flames in less than a minute.

"The occupant was extremely fortunate to escape," Belau said.

The fire broke through the ceiling of the garage and entered the attic, spreading into space over the house itself.

Five fire engines and a ladder truck went to the scene. They got the fire under control by breaking through the ceiling inside the house and shooting water onto the flames. They stopped the fire in about an hour, Belau said.

Firefighters stayed at the scene through the night to assure no hot spots broke into flames.

No one was injured.

The garage and its contents were destroyed, and damage in the attic was significant, Belau said.

A cost estimate wasn't immediately available.

Link to comment
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

I have one of the refill adapters and what I don't unferstand is how can people fill the 2# tanks with the new valves on the propane tanks? I tried it the other day (outside and away from any source of spark, heat fire, etc) and it just plane doesn't work, It did with the old tanks. I did it to just see if it would work.

Link to comment
Share on other sites

What is it about refilling the 1 pound cylinders that is so dangerous. Watching a couple videos on youtube it seems pretty straight forward. It sounds like to me you will have an occasional one with a bad valve? I was thinking of getting the adapter but i have heard horror stories from some and others say it is no big deal. Is it kind of like the turkey fryers? I assume as long as you take the necessary precautions and leak test everything you should be ok?

Link to comment
Share on other sites

What is it about refilling the 1 pound cylinders that is so dangerous. Watching a couple videos on youtube it seems pretty straight forward. It sounds like to me you will have an occasional one with a bad valve? I was thinking of getting the adapter but i have heard horror stories from some and others say it is no big deal. Is it kind of like the turkey fryers? I assume as long as you take the necessary precautions and leak test everything you should be ok?

They are meant to be used once, the valve (that little pin in the middle of the threaded part) is not designed to be opened and closed multiple times. After a few [once for some] open/close cycles the valve will hang up and no longer seal properly. If it isn't noticed you will have propane leaking out and any open flame will ignite it.

I personally have gotten numerous tanks that won't seal properly after the first use, so I have completely stopped removing the tank from the heater unless it is empty, and even then I will toss it outside incase some residual leaks out. Opening the tonneau cover on your truck and getting a cloud of propane from a partially full tank that you removed from your heater an hour earlier will open your eyes to how dangerous those things can be.

Link to comment
Share on other sites

I notice none of the guys that said it is perfectly safe have posted about this

I'll bite. First off, I doubt anybody ever said it perfectly safe, obviously, anytime you handle a flammable material, you have risk! I've been refilling for several years, use newer 1-lber's and test for leaks. I do it OUTDOORS and weight before and after I fill them, they never seem to weigh a much as a new one when refilled (I compare weight of full store bought for reference)so they don't appear to get completely full. I don't recall ever having one that leaked, in fact, the only one I can remember leaking is a new one that I unscrewed when it was partially used. You just don't fill them in a garage with a active ignition source! I bought a big buddy and now use a pankcake style tank, so I don't fill as many, but still have a few always ready for backup! Like others have said, do really think Coleman or whoever makes these refill adapters would sell them, if it were illegal to refill them!

Disclaimer: this is my opinion on the use of this product and you have yours, so I'm not going to get into a pi$$ing contest over who's right and wrong.

Link to comment
Share on other sites

I'll bite. First off, I doubt anybody ever said it perfectly safe, obviously, anytime you handle a flammable material, you have risk! I've been refilling for several years, use newer 1-lber's and test for leaks. I do it OUTDOORS and weight before and after I fill them, they never seem to weigh a much as a new one when refilled (I compare weight of full store bought for reference)so they don't appear to get completely full. I don't recall ever having one that leaked, in fact, the only one I can remember leaking is a new one that I unscrewed when it was partially used. You just don't fill them in a garage with a active ignition source! I bought a big buddy and now use a pankcake style tank, so I don't fill as many, but still have a few always ready for backup! Like others have said, do really think Coleman or whoever makes these refill adapters would sell them, if it were illegal to refill them!

Disclaimer: this is my opinion on the use of this product and you have yours, so I'm not going to get into a pi$$ing contest over who's right and wrong.

Never said anything about it being illegal, but the tanks were not meant to refill. You might be saving yourself a dollar a tank and I just don't think it is worth your life.

Link to comment
Share on other sites

I hate using the small 1 pound cylinders. They are light and very handy for ice fishing, but they leak. Even the new ones after they have been used and disconnected for transport. It seems the colder it is outside the more they are likely to leak after being used. It would be if there was an inexpensive 1 pound cylinder with a shut off valve.

Link to comment
Share on other sites

I was down in Rochester visiting my parents over the Holidays just after this happened. They live fairly close to this house. Taking a look at all of that loss over refilling one pounders, yikes. The guy was really lucky to survive.

I have no problem paying $2.50-3 per tank and I've never desired to refill my own. Guess I do need to find out how to dispose of them though, since I have 8-10 empties in the garage. If they are completely empty, can you just take them to your local waste facility? Do they charge for them?

Link to comment
Share on other sites

I refill them on occasion.

I never refill them indoors.

I always hook them up to something right after refilling because the valve is unreliable after refilling.

I remember way back when you could buy a refillable 1 lb tank with a reliable valve, I wish you still could.

Link to comment
Share on other sites

I have talked to people about this, and the point about safety is a great one, however where does it say the guy was refilling portable propane tanks?

I read "as the man was working with portable propane cylinders, getting ready for an ice fishing excursion". where is the "refilling" part i missed?

He could have been moving them, he could have been taking an old, almost empty one off to put a new one on, he could have been screwing on a new one to a christmas present he recieved or a million other things we "work on" when prepairing to go ice fishing. I think people are assuming this guy was doing something he very well wasnt doing.

In fact i was "working with portable propane tanks in the garage" just last night. I moved 3 old ones from the shelf, and one felt like it had a bit left in it, so i screwed each on the lantern and checked them. All were empty so i put them in the box of empties and installed a new tank on the lantern. I then moved the 20lb'er and removed the sunflower from it. At no time did i attempt to fill any of the old ones, but if i blew my garage, the story could/would have read just like this one.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.