Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

how high do you setup your deer stand in the tree?


SouperStar22

Recommended Posts

Souperstar it all depends on the woods, stand you use, back ground cover and your shooting capabilities. What I mean by that is I can get away sitting lower in a tree 15' or less if I can shoot accurately out to 30+ yards and sit further off the trail and usually I can find an old white pine or cluster of pine trees. If you have red oaks the leaves stay on longer and you have extended cover for most of the fall. If using a hang on stand you can get away with sitting lower in a knarly oak because its usually harder to blend in with a ladder stand or a climber. So it really depends what you have for tree options dictates how high or low I'll put up a set. 99% of the time I use ladders because I'm kind of a chicken-[PoorWordUsage] and like the ease of getting in and out, hope that helps.

MR

Link to comment
Share on other sites

I am afraid of heights, so as close to the ground as possible, and it has usually worked just fine for me.

Same here. I'll only go as high as I have to. Usually not higher than maybe 10 feet.

In the woods I hunt there seems to be a sweet spot between 8-12 feet. Any higher and you start getting up into the branches of surrounding trees. You won't get busted as easily but you also lose alot of your shooting lanes because you have to look through so many branches. Best bet for me has usually been to climb up right to the bottom of the first layer of branches so i can see under them but they also break up by silhouette and provide good background cover.

Link to comment
Share on other sites

With a climber stand, I go as high as I can up to around 30'. (which is about the length of my cord). On a hang on stand, it depends on the tree. Like someone else metioned earlier. If the tree is thick enough and has lots of thick branches and/or some leaves, you can get by without going very high and not get busted. Its all about being concealed.

I always wear a safety strap now, after falling about 18' and shattering my wrist about 8 years ago while climbing down from a hang on stand. I prefer climber stands now because my safety harness is tethered to the tree from the time I leave the ground.

Nels

Link to comment
Share on other sites

Thanks guy for all the response. I just felt busted cause this past weekend I was sitting in a red oak and all I had was just couple shooting window thru some leaves, I was cover around with leaves and this monster does saw me but wasnt that spooked but saw me. I was sitting atleast 17 feet high

Link to comment
Share on other sites

Depending on that particular tree you might still have been sky-lined. Keep in my if that doe saw you she must have smelled you or walks that trail often to sense something was not right, not much you can do to prevent there instincts.

MR

Link to comment
Share on other sites

On smaller platform hangons, I prefer to only set them up between 15 and 18 ft. I've had them at 20 ft or a little more and I could barely stand up without feeling like I was gonna tip over. With the climber, I go about 25' at the highest. The sit & climb bar on my Summit Razor SD makes me "feel" more secure when I'm up there - not that it really will prevent me from doing anything dumb, but it helps with confidence.

Link to comment
Share on other sites

10-12 feet. My best stand is likely only 9 feet up, but it's in a group of two trees and situated such that I seem to be very concealed. I've even had the neighbor walk up up within 15 yards once and he said it was very hard to tell I was there.

I agree with what nofish said... sometimes the woods dictates that you can only go up 8-10 feet because if you go any higher you've lost sight lines and shooting lanes due to the canopy. It really is a situational type answer.

Link to comment
Share on other sites

Most of our stands are ladder stands that range from 12'-15'.

We do have a portable that is probably closer to the 18' range and I use a couple of climbers that I will take anywhere from 10'-25'

cover, shooting lanes, terrain and travel areas all play a role in deciding how low or high we set up.

Link to comment
Share on other sites

Depends on the availability of stand trees. We hunt pretty high generally, but wear safety system and have lead lines we hook into to move up and down the tree. I think more than just height, how well you can brush yourself in (break-up concealment of limbs, leaves, etc) is the most important.

Link to comment
Share on other sites

Most mine are right around the 20' mark. I use to stick around 15' and deer seemed to look right at me unless I had a bunch of cover, but the best trees don't always have the best cover. 20'-22' up and they don't see me. I get away with more movement also.

Link to comment
Share on other sites

Don't really matter how high you go, the important part is being covered.

When using a ladder stand I like to find the biggest tree in the woods to put that bad boy against, you can't get outlined because your background is a solid tree.

That being said when I use a normal stand I like to go as high as I can or where there is the most cover in the tree.

I have one stand that is about 40ft off the ground because it is placed half way up a hill to hunt the flat on top, when I look foward it looks like I am about 20ft off the ground, when I look behind me I'm so high up I feel dizzy lol, but if I didn't go that high up I'd be at eye level of the deer.

Link to comment
Share on other sites

Some clothing or regular laundry detergent also have UV brighteners,deer will pick you off from a long ways when you look like a glowing spotlight. Try washing you clothes in scent away laundry detergent or just plain water and baking soda. If you are using a washing machine make sure you run a couple empty loads through first.

With that said I go up as high as I need for background cover. I normally try and use big oaks and get up where I have a V at my back.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.