Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Thermos bottles


lesterl

Recommended Posts

I use my thermos every day for coffee and it is still warm (not hot) at noon when i pour the last cup, i usually fill it at 530 or 600 am. if i am heading outdoors for work or hunting i pre heat it like everyone else said and it stays hot even longer.

Link to comment
Share on other sites

I've got an Aladdin Stanley that keeps my beverages very warm for over 12 hours. It's been in the family for 15 years now and she's built like a tank.

The Nissan's are also quite awesome. I had one before misplacing it in a snow storm.

Link to comment
Share on other sites

The Stanley (green) is the best thermos you can buy. Keeps my coffee hot for well over 12 hrs. Not very spendy either. The price is the same as a good Thermos brand, but the Stanley out performs them all.

Yes sir! I have 2 of these. Passed on from my grandpa...Put hot coffee in, 12 hours later you can still burn your tongue. No matter how cold the outside of that stanley canister is...it's still steam'n hot on the inside. I hope they are still making these. Mine are over 20 yrs old.

Link to comment
Share on other sites

There are major differences between how a Stanley green bottle and a genuine Thermos (or Thermos/Nissan) bottle insulates the contents from the ambient (outside) temperature. The Stanley bottle uses a charcoal powder. Thermos uses a very high tech manufacturing process that draws all of the air between the two layers of stainless steel creating a "vacuum".

A good vacuum bottle should keep your coffee hot for at least 12 hours depending how many times it's opened. Another tip is to only unscrew the lid as far as you need to pour to limit the amount of heat that escapes. Tempering the inside with hot water as several posters have said is key since steel is inherently cold. Take a look around for the Thermos "Rock" bottle. It sells for $24.99 - $29.99 and unless you lose it over the side of the boat or down your ice hole it should be last vacuum bottle you will have to buy.

Link to comment
Share on other sites

Another vote for the classic stanley thermos, I got mine at a local thrift store for a couple of dollars. The real key is to warm it up first (as has been mentioned here). I will just "brew" a pot of hot water (no coffee) pour that into the thermos, then brew a pot of coffee while the thermos warms up. Pour out the water, pour in the coffee and try not to burn your tongue out on the ice!

Link to comment
Share on other sites

I got my old Thermos "Blue" solid metal in 1983 when I was a young copper on the graveyard shift. We all carried the same one... we poured bubbling hot water in 'em, and let 'em sit for a half hour or so before dumping in our coffee. These had the old blue & red "flip to pour" spout. Think I've been through 3 of those.. the plastic just [PoorWordUsage] out. Still use every ice fishing trip...keeps the java hot as I like all day.

Link to comment
Share on other sites

Originally Posted By: superbee
The Stanley (green) is the best thermos you can buy. Keeps my coffee hot for well over 12 hrs. Not very spendy either. The price is the same as a good Thermos brand, but the Stanley out performs them all.

Yes sir! I have 2 of these. Passed on from my grandpa...Put hot coffee in, 12 hours later you can still burn your tongue. No matter how cold the outside of that stanley canister is...it's still steam'n hot on the inside. I hope they are still making these. Mine are over 20 yrs old.

I take my Stanley almost everytime I go ice fishing. Get out around 6:00 AM and I can still open it at 10:00 AM and coffee will be steaming!

I love that thermos!

Link to comment
Share on other sites

Ok so I thought I would chime in to give you a real life situation I have experienced with Nissan Bottles. Many years ago I was a MFG Rep. One of the companies I represented was Nissan. I could go on and on with technical data explaining how they are made but I am not. A regular sales ploy we used was to buy a dozen doughnuts and fill a Nissan bottle with Coffee. We would then over night it packed in a refrigerated cooler to our buyers at various retail companies through out the US. The coffee would arrive piping hot and doughnuts fresh. It worked evey time. Never a spill, never cold coffee.

There is one trick to making any insulated container work better, fill it with either hot or cold water, whatever your desired goal, prior to putting your beverage in it. This sets the metal walls of the container to the same ambient temp of the beverage and will keep it hot or cold longer.

By the way to this day I still only buy Nissan products they are just better and worth the money. I have no connection to the company.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.