Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Latest and greatest in musky lines???


MDC114

Recommended Posts

What is the best thing going now a days in musky lines and leaders? I have been out of the musky game for a while but getting back into it with a trip to the NW Angle this fall. Would appreciate any advice on line and leaders...and also and advice on muskys in the NW angle in October (MN vs. CDN, etc..) Thanks. MDC

Link to comment
Share on other sites

There seems to be some consensus for powerpro. Two questions: 1) what is so great about powerepro compared to other lines 2) several people have said 80# line, I have a heavy action guide series rod rated for lures up to 4 ounces but is only rated for 50# line. Would you all still recommend using the 80# line?

Link to comment
Share on other sites

I hate to disagree, but 80# Cortland Spectron is my favorite. More body and a slightly larger diameter than PP, which seems to work better on my reels. Also, the coating on the PP seems to come off the line easily, defeating whatever purpose it is on there for. I have used both with good results along with Spiderwire and keep going back to Spectron. Try both if you can, alot of this is a preference thing, as both are quality products. Stay away from the 50# range though, way too small diameter. 80# or 100# will be much better for the Angle in the fall, where you will most likely be fishing rocky structure.

later,

toddb

Link to comment
Share on other sites

I've used Tuf-Line for the past 12 years or so and have no reason to try anything else. It's been great. I use 80 pound. About the only thing I ever hear negative about Tuf-Line is that it soaks up water. But Tuf-Line XP (which wasn't around when I first started using the line) doesn't soak up water like regular Tuf-Line does. I don't know much about Tuf-Line Plus. Stren Super Braid, which is the latest one to hit the scene, sounds like some really nice stuff. If I was going to switch from Tuf-Line (which I have no intentions of doing), I would try the Stren.

Aaron

Link to comment
Share on other sites

I used most of the superbraids like tuff line and allthough they are all pretty good they do not compare to Power Pro. The line is rounder and does not fray as easy as most of the others. For those of you who are having trouble breaking line when casting , i would suggest looking more at your brake settings and casting technique than blaming the line. This stuff is even tough to break during a backlash. I use 65 and 80 pound test nothing lighter. 50 pound test like someone mentioned above you are just asking for trouble if you get a backlash with a heavy lure as far as i am concerned. I have broken off more tuff line doing that than anything else. In three years of using power pro i have busted one lure off while casting otherwise it has been great. Has held up better than anything else i have used. It all comes down to personal preference as they are all pretty decent but , after using the majority of them there is by far a clear cut winner and thats Power pro. I even switched most of my bass rigs to it(even though they hardly get used thanks to musky bug.) Sorry to sound harsh but you can't blame the line for break offs. Yeah , you may get a bum spool or something once in a blue moon that has degraded or whatever (havent run into that yet) but it relates more to operator error or incorrect brake setup in my opinion.

Link to comment
Share on other sites

Despite the couple of negative reports above, you can't beat Power Pro. More muskie and bass guys are using it than anything else for one reason- it's the best product available.

Link to comment
Share on other sites

I tried 50# PowerPro this spring on LOW sturgeon fishing and it held up great. We had a few fish that topped 50 pounds. I have yet to try it throwing muskie baits, but the way it sounds I should've went with 65# or 80# test frown.gif

Link to comment
Share on other sites

used tuff-line for many years and have now switched to power pro this year you will not be dissapointed .power pro casts easier does not hold water and if you do get a backlash way easier to get out.diffently go with 80# don't go any lighter. give it a try.

Link to comment
Share on other sites

I have Musky reels with both 80# Tuffline and 80# PowerPro and the only thing I didn't like about the Power Pro was that my hand and shirt turned green from the dye in the line after the first day's use. The line is now almost all white. You have to make sure you tie the recommended knot with PowerPro too or you'll loose lures, worse yet fish, leader and lure. I use 8# PowerPro on my Walleye rig too and it works great.

Link to comment
Share on other sites

After trying them all I'm going with either the Stren braid or the Spider Stealth. Like them both over Power Pro. Leaders? I like Buchers but there are many good ones out there, in my opinion, forget the titanium ones - go with sevenstrand, single strand, or mono or flouro. Cat's Tails, Musky Innovations, Smity, Bait Rigs, etc.

Link to comment
Share on other sites

Anyone who uses a superbraid in anything less that 65# is asking for trouble. It isn't the # test you need to be concerned with, but the diameter. These lines are so strong and a small diameter, but small diameters mean backlashes, cut line (low abrasion resistence). These lines will dig into your spool and snap if you have a healthly lure on and get a backlash.

IMO Tuf Plus was the worst line ever produced. The original Tuf and the new Tuf XP are much better. I use Whiplash in 80 and 100#. Cast nice, few backlashes and they do not soak up water like Tuf line does. This may not seem like a big deal, but casting in October when the water temps drop, you get some cold hands!

Any of the lines are good (except Tuf Plus), just get it over 65# or you are asking for trouble.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.