Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

recharging glow jigs


klee

Recommended Posts

I forget the name of the light but someone will post it if they see my post.

This light screws into one of the knob holders on a flasher. It connects to the flasher battery. I have used camera flashs and LED flashlights to charge up the lures.

I do believe by far this light is the best I have used to date. It really has a highly intense light it puts off. One could use it for a flashlight if the wanted to hold thier flasher as it is that bright and powerfull.

As far as price for this light goes, they were about $40 a few years back so I am sure they are a bit higher now like everything else.

Sounds like I will need to try the black light. I just wish the glow jigs would keep thier glow longer. Maybe better glo paint.

Link to comment
Share on other sites

pathogen - what's up with your name? have i asked you that before?

as a microbiologist, i'm interested, LOL

I was looking for a nick that was unique when I was doing a lot of on-line gaming. And I just kept it out of habit. I guess it really has no bearing in these forums. smile

Link to comment
Share on other sites

I forget the name of the light but someone will post it if they see my post.

This light screws into one of the knob holders on a flasher. It connects to the flasher battery. I have used camera flashs and LED flashlights to charge up the lures.

I do believe by far this light is the best I have used to date. It really has a highly intense light it puts off. One could use it for a flashlight if the wanted to hold thier flasher as it is that bright and powerfull.

As far as price for this light goes, they were about $40 a few years back so I am sure they are a bit higher now like everything else.

Sounds like I will need to try the black light. I just wish the glow jigs would keep thier glow longer. Maybe better glo paint.

It's called Lure Lightening and it uses a combination of UV and High Intensity LEDs. Incredible product.

Link to comment
Share on other sites

I have looked jnto that Lure Lightening too. It looks a like a neat thing. I saw it at the ice show the two years I've been there. I was just watching their videos the other day. Comparing this to the black uv light, which is better? Or are they the same?

Link to comment
Share on other sites

Giv the Ax-Man store a look see for UV flashlights. You can get them for less than $10.00 for a pocket size one and the University store had pen size ones for about a buck. Here is one of the small ones, attached to a retractible cord on my fishing vest. Very handy.

Blacklight.jpg

Link to comment
Share on other sites

I forget the name of the light but someone will post it if they see my post.

This light screws into one of the knob holders on a flasher. It connects to the flasher battery. I have used camera flashs and LED flashlights to charge up the lures.

I do believe by far this light is the best I have used to date. It really has a highly intense light it puts off. One could use it for a flashlight if the wanted to hold thier flasher as it is that bright and powerfull.

As far as price for this light goes, they were about $40 a few years back so I am sure they are a bit higher now like everything else.

Sounds like I will need to try the black light. I just wish the glow jigs would keep thier glow longer. Maybe better glo paint.

Harvey I have a "Lurelightning" from when they 1st came out many moons ago and its still charging my lures like crazy today. I have had very good luck with it.

I wonder if I put some black or purple cover over it if it would work better? Or does that not change the charging ability?

Link to comment
Share on other sites

Agree on the UV flashlight, been using one for years and it is the bomb.

Glow white is the easiest color to glow and white lights do okay with glow white ..... but with glow red or glow blue baits the white light doesn't do much and the UV light kicks butt!

Link to comment
Share on other sites

I use a clamp on work light (120V) with a black light bulb in it, plugged into an outlet. It's clamped on above my primary fishing hole.

Works great! It's also a perfect night light when you wake up to take a wizz wink

Link to comment
Share on other sites

I forget the name of the light but someone will post it if they see my post.

This light screws into one of the knob holders on a flasher. It connects to the flasher battery. I have used camera flashs and LED flashlights to charge up the lures.

I do believe by far this light is the best I have used to date. It really has a highly intense light it puts off. One could use it for a flashlight if the wanted to hold thier flasher as it is that bright and powerfull.

As far as price for this light goes, they were about $40 a few years back so I am sure they are a bit higher now like everything else.

Sounds like I will need to try the black light. I just wish the glow jigs would keep thier glow longer. Maybe better glo paint.

Thanks Harvey. Just ordered mine.

I used to have a UV, one that was used for automotive uses, super powerfull, but it sunk to the bottom of the lake fast too! grin

Link to comment
Share on other sites

Paint the outside ring of your holes with glow paint and you'll be in business with that blacklight.

I am glad someone posted this. I had forgotten that UV was better. I'm going to pick up a little UV flashlight now rather then raising my jig up to my LED light strip. I use glow red a lot and it sounds like UV does a better job with it.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.