Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

cold hands


ortonville

Recommended Posts

after fishing all weekend and having cold hands i cant take it any more.i must have 50 pair of gloves and mittens whats the warmest glove out there? i have tried everything i can think of what do you do to keep your hands warm saturday was brutal

Link to comment
Share on other sites

Ice armor I have the gloves but the mittens will keep your fingers together and warmer.

Heres a discussion about them.

Gloves

I like the Ice Armor gear that I have, but after wearing then for 10 min my hands are sopping wet with sweat. When you take your hands out you can't get them back in since the fingers pull out. I do love the mittens though, mostly use them on the wheeler or sled then switch to insulated leather for set-up or fishing on the ice.

Link to comment
Share on other sites

I had the ice armor extreme gloves until last year when i left them on the roof of my car. I bought the frabill FXE snosuit gloves this season. Night and day snosuit wins. I was out yesterday morning when it was around 8 degrees and never got cold. Theres a store right now that has mountain in its name that has them onsale on-line. I have problems keeping my hands warm and these work. Plus the leather palm is very soft and nice to grab and wear while doing things. I was able to unscrew the vent cap on my auger with them on. so dexterity is there in the glove. Also the nylon that the rest of the glove seams to be much tougher than the ice armors. The ice armors were starting to rip after just 2 seasons. I don't see the snosuit's doing that.

Link to comment
Share on other sites

I never wear gloves, hate it trying to get them on and off. Get a NICE handwarmer muff and bring a few hand warmers and stuff them inside. Your hands will be plenty warm. They even make some with rechargeable battery packs that have built in heaters. Great for hunting and ice fishing.

Link to comment
Share on other sites

I wear wool gloves with the fingertips cut. I make sure my chest area is warm that will make your hands warm. I rarely wear gloves when ice fishing, only time is when drilling holes. Something as easy and light as a polar fleece vest just that one extra layer does it for me.

Link to comment
Share on other sites

I have the Ice Armor, Artic Armor and a few other brands and none of them did a great job.

I purchased a set of SnoSuit mittens and finger gloves.

2 years ago on Rainy Lkae with the morning temps for all 4 morning below the -30 mark, we got on our sleds and traveled 10 plus miles each morning and my hands never got one bit cold at all.

The mitts are warmer than the finger gloves but both were the best I have ever worn hands down.

All b-s aside, these gloves are worth the extra dollars and I am sure you would be more than happy with a pair of them.

Link to comment
Share on other sites

I actually use extremely thin gloves 99% of the time when i'm fishing, and typically i'm hole hopping. They are manzella wind stoppers. Probably only .030" thick, but do stop all wind and reflect heat back to your hands. Great for fishing as i can tie jigs, etc with gloves on.

I spent two hours hole hopping in the frigid weather saturday with no cold hands.

Link to comment
Share on other sites

I had the regular Ice Armour gloves 2 years ago (Not the X ones) and they were junk. Didn't keep my hands dry and between the thumb and index finger they would always wear and break apart. I think the wear in that spot came from running the auger a lot. Kinda interested to try the Snosuit ones

Link to comment
Share on other sites

Hamms-scooter said it best. If you want to keep your hands warm, wear a lot of layers on your upper body. By keeping that very warm, the blood pumped to your hands will be enough to keep them reasonably warm.

So far I have been unhappy with my ice armor gloves (on my third pair-there will not be a forth) and will have to check out some of these others types being named.

Link to comment
Share on other sites

I wear two different kinds - just the normal and not great Ice Armor gloves when driving the sleds (and trail riding) or atv, and maybe drilling holes. Then when fishing I wear the thin work gloves, can't recall the name, that you can get at menards. They have the black rubberized palm and are simply fabric. Thin enough and grippy enough to take fish off easy, bait a hook (even with gulp) or crack a beverage without taking them off. They are awesome, but I wish the backside was windproof. If they were I bet that is all I would wear. Easy to slip into pocket or bibs when not using hands, and relatively cheap, about $7 I think...

Link to comment
Share on other sites

I own both the Ice Armor Mitts, and the smaller lighter gloves. The mitts are too warm to wear until my hands are froze. Puts that problem away in a hurry though. They are always brought along with. The little IA gloves were nice for the first two seasons I wore them, but now they are little more than a driving glove. I like that they are light enough that I can usually fish with them, but since they are worn, the waterproof-ness and the warmth they once had are no longer. I'll have to look into the Snosuits for next year!

Link to comment
Share on other sites

Tried the Ice Armor gloves, very warm but not all that durable. Picked up a pair of the yellow and black Frabill task gloves and they are not that warm either but I don't think they are made for fishing in extremely cold temps for that matter. I also picked up a pair of the Snosuit FXE gloves and they have been pretty sweet so far. I keep a pair of wool fingerless gloves in my pocket for when I want to fish outside the house and just got one of the zippo handwarmers just for that purpose, gonna give the handwarmer a test run tomorrw.

Link to comment
Share on other sites

I have the Artic Armor Mitts and love them, They keep my hands super warm and are also watter proof for breaking out some skim ice on those cold days. I also wear wool gloves with no finger tips under the mitts for when I hole hop I can fish and switch hands if they get cold.

Link to comment
Share on other sites

I found the AA gloves and mitts make my hands sweet too much and arent easy to get on and off. I had some Ice Armor mitts that were ok but the best I had was the Sno Suit mitts. Not as warm as my leather choppers with double felt liners but darn warm for being so light.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.