Lets see your boat

[LightningBG]

how do you post pictures?

click the little button with the red picture/box and blue arrow in the reply box.

[amateurfishing]

My 1984 crestliner explorer and 75 hp 84 mercury

[hanson]

Hey Hanson, is that at the Eagle Lake public access if so I have a TON of memories from that lake, pretty much grew up on that lake when I was a kid, my first muskie came from there.

Yep it is. I live pretty close so its nice and convenient when you want to do some casting. The launch is shallow and sucky and the parking situation is sucky but other than that...

[mnhunter79]

1995 boat amd motor. newest addition is the 898 C SI counsel unit

[hamms-scooter]

Nice warrior!

[nater]

[TruthWalleyes]

My walleye chaser!

2008 Alumacraft Fisherman 160: 16.3' center length, 25hp Yamaha 2-stroke, 55lb thrust Minn Kota

Do you use those handle bars in the front for rod holders?

[ib_jigged]

Time for some Lunds on here!

Our 2010 Lund 1725 Rebel XL Sport

[GlassEyeangler]

i put the bars up front for two reasons...knowing i would never mount a trolling motor on the bow, i put them on so people would have something to hold onto when i have to fetch the truck in a hurry on a windy day at the landing. the other reason is my kids...my daughter loves to sit up there and thought of safety first. it gives them something to hold on to when we're motoring around.

the rod holder idea is an interesting one...i might have to try that!?

one of my future purchases is to install rails in the front and rear so i can use rod holders. i would put them in a different place though.

[TruthWalleyes]

Good man!

My daughter's 'got' to kneel up front in mine also when she feels the need to stop fishing and start spinning circles around the lake

[TyGuy02]

nice rig ib_jigged! That's what I'm saving up for RIGHT THERE! Big enough to go skiing or tubing, yet geared for fishing. I'm in your neck of the woods, if your looking to sell in 3-4 years...I'll be paying attention!

Here's mine, ugly but I put alot of work in this spring so that I would be content with it for a couple more years. PD2 w/Ipilot and floor made a TON of difference. I almost always fish alone, getting my hand off the tiller has made fishing much less stressful.

[ib_jigged]

Thanks TyGuy02. I went from basicallly what you have to the one we have now. I am very happy with this boat. Works well for all around stuff. We keep it at our seasonal sight north of Bemidji all summer, so we drive right through your town on the way to and home from there. Hopefully I won't get tired of it in 2-3 years, but you never know!

Actually know a guy form Fosston at our campground (does concrete work, you may know him?).

[sloughshark]

06' navigator

60hp tiller

[LakeDocktor]

Back to the Alumacrafts.....

[GlassEyeangler]

WOW...now that's a nice looking Alumacraft - very sweet!

[Slob_Samurai]

Keeping the Alumacrafts rolling:

[bobbymalone]

Back to the Alumacrafts.....

that honeycomb is pretty sexy. they come out of the factory like that or is it a custom job? never seen one like that before.

[nater]

Back to the Alumacrafts.....

That is really sweet.

[hamms-scooter]

sloughshark nice boat! Does that trolling plate work good?

[sloughshark]

Thanks hamm scoot, I do not use the trolling plate very often but it does have its time and place. I can troll down to about .9mph with it all the way down, i use it mostly on windier days when its hard to get the rpm's just right. I also use it in the spring sometimes when crankin them cold water eyes. I do loose some boat control while using it, steering is a bit more difficult, but not too bad

[Pherris]

My weekend office.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

[hydro]

My all purpose rig

[CrappieNight]

GlassEye, nice rig. How long have we lived in the same neighborhood? Have you been to any of my rod sales?

[GlassEyeangler]

CrappieNight...well then hello der neighbor! actually we recently sold our townhome, and bought a house close to Marion Fields park. i haven't been to any of your rod sales in the past. do you make custom fishing rods?

[gregg52]

first time posting pics here

not sure its going to work