Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

under armour cold gear


Recommended Posts

I have one Under Armour shirt...I do not look like the mannequin when I wear it but more like a plumb that fell off the tree with a brand on his neck. Let me tell you another thing for those of us that still hunt, gather and grow chest hair prepare to scratch and wonder why you needed something that tight to your skin. It was warm but not for those of us that buy hair n body soap and have very little hair on our heads.

Now the gloves, hat and even the flip gloves/mittens are great. In fact I have wore the gloves all last ice season and now have wore them for bird season (I hunt daily) and I am wearing them for deer hunting and they are just starting to wear out.

Link to comment
Share on other sites

I really like my UA but like Johnny said it can seem a little too tight. I guess if it is going to wick the sweat off of you it needs to be right against your skin in order to do its job and it dose a great job in that department. The one thing that I did buy was a shirt with a zipper so it was not so tight around my fat neck.

Link to comment
Share on other sites

Definetly worth a try, I love mine, I need a couple more so I dont have to wash the ones I have all the time. If you dont like the compression fit (too itchy) then go with any kind of polyester base layer, I'd imagine it's pretty close to the same thing. I know when I wear poly dress socks under wool sock or even cotton socks it makes a huge difference. (Snowboarding buddy taught me that one)

Link to comment
Share on other sites

I'm not a fan. I guess if I could shift a few pounds around I might look cool wearing it, but thats about it. Its itchy, tight, rides up my back, and doesn't seem to keep me much warmer. It does wick moisture very well, though. If you want something that keeps you warm, get the polar weight stuff from Cabelas. I can't remember what its called exactly but the insulation is kind of waffle shaped and fuzzy. Now that stuff is warm. 100X better than underarmor in my opinion.

Link to comment
Share on other sites

I'm not a fan. I guess if I could shift a few pounds around I might look cool wearing it, but thats about it. Its itchy, tight, rides up my back, and doesn't seem to keep me much warmer. It does wick moisture very well, though. If you want something that keeps you warm, get the polar weight stuff from Cabelas. I can't remember what its called exactly but the insulation is kind of waffle shaped and fuzzy. Now that stuff is warm. 100X better than underarmor in my opinion.

I do not wear it for warmth. I can work up a sweat with the best of them and that is what I expect my UA to do is wick away the moisture. It is considered a base layer. Heck if want to stay warm look into a set of down long johns. I have a set of the Expedition weight from Cabelas and yes they are very warm but you should still have a base layer before they are worn so the layer closest to the skin is always dry.

Link to comment
Share on other sites

I really like UA heat gear or loose, I've got bunch of them I use for base layers. But you can keep the UA cold gear ,the original stuff. I feel like sausage stuffed in a casing and a guy sweats something fierce. Sure it will wick moisture, but it creates more than a guy would normally do and I don't think it insulates as good as a good fleece base layer.

Link to comment
Share on other sites

Anyone know how well this stuff works.

Personally I think that it's overpriced and that it underperforms.

Over the years (decades smile )I've purchased many overpriced base layer products. Not gonna waste my money any more.

The hype (marketing) has never matched the promises IMO.

I now buy only inexpensive poly or wool (yeah, I know, wool ain't always so inexpensive, but it doesn't hold odors) base layers, and from my experience they perform just as good, if not better, than high ticket products such as Under Armour.

2c

Link to comment
Share on other sites

I own an under armor top for cold weather and I don't think it's worth the money. The fit is just a little too tight and while they do wick moisture away, I think you sweat more than usual. Also, I wouldn't wear it for more than one day before washing it. They tend to get the stank pretty easy IMO.

Link to comment
Share on other sites

while i may not believe that UA live up to the UA hype, thermal base layer technology has come a long way since cotton waffle long johns. if keeping you warmer keeps you out longer, it might time to upgrade. if you are doing just fine with the old school-ers then stick with what works.

just sayin.

Link to comment
Share on other sites

thermal base layer technology has come a long way since cotton waffle long johns.

Since cotton, yeah, their have been some major improvements. But I still feel that since synthetics were introduced their haven't been any majory advancements.

Link to comment
Share on other sites

I own three of them and I like them better than my duofold wool long underwear shirts. Yes they are tight and snug, but they are warm. You don't realize how snug they are until you take them off though. If I am going to be active (like pheasant hunting last weekend) I will wear the duofold wool shirt, if I am going to be sitting in the cold or active in the middle of winter, I wear the UA shirts. I don't have to dress in as many layers as before and I like wearing them. I bought all three of mine in the bargain cave at Cabela's and have never paid more than 25 bucks for them (XXL size).

I also own three UA hoodie sweatshirts and think they are awesome as well, not for the name, but for the way it keeps me warm and if they do get wet, they dry a lot quicker than cotton.

Link to comment
Share on other sites

wthermal base layer technology has come a long way since cotton waffle long johns.

just sayin.

And I'm just saying that I've used both types and the long johns seem to work as well, if not better...especially for warmth factor.

To be fair, I'm not sure if the long underwear style is as comfortable, not that either style is exceptionally comfortable.

I think companies like to splat their brand name out there in order to get people to open up their wallets for the latest and greatest underwear technology, especially given the vast improvements in said underwear technology.

Just remember, cotton kills.

Link to comment
Share on other sites

I work outside four to six hours a day, year round. Bought cold gear long sleeve shirt bout three years ago, no way would I go a winter without it. I use it as a base layer then long sleeve T over it, next fleece long sleeve then sweat shirt, top off with mediem weight jacket.

Link to comment
Share on other sites

I've been a firm believer in UA for at least 5 years now. Yes, the compression fit can be tight and it definitely turns some people off. I just buy one size up from what I would normally wear when I buy the compression fit. Cold Gear is too warm for me unless it is well below zero so I typically wear the Heat Gear. I've tried Cabela's branded stuff and a couple of other poly options and always go back to UA. Now that there is a UA outlet store in Albert-Rock-City it can also be had for a fraction of the price. wink

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.