Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

ways to get unstuck!


broken_line

Recommended Posts

i have a 10" auger. and it works dandy with my blazer. if im by myself i will put it in 4 low then in one, so the tires are spinning with out the gas pedal being pushed down then i start winching and it usually pops out on its own, load the log up and drive out! its sometimes handy to keep 2 comealongs with you (more winching lenght). this has saved my butt 2 times on the lake and once out of the ditch i ran a tow stap across road to a pole on the other side of the road.

for the slushy areas, i keep 2 6 foot long 2x6s staped to the roof, stick them under the tires and do the same thing as i saida above.

i really like the salt idea. i might have to get stuck and try that laugh

Link to comment
Share on other sites

Ok thank you. I might have to pick one up for just 30 bucks.. Then do you just put that on the board? Im interested in this since i have a car which tends to get stuck a lot in the places i like to go...

Harbor Freight had some for about $15. I think. Hooks on both ends already.

Link to comment
Share on other sites

when I used to run mille lacs all the time I always had bucket of ashes from the fire place. in the back of the truck works great for traction. a hand come-a-long with a water spike was in my truck also drilled a couple holes next to each other set the points of the water spike in it and hand come-a longed my self out of a few monster drifts out on the flats.

But the biggest part of it was driveing smart paying attention to the terrain around you. but things happen so the stuff I mentioned was always with.

Link to comment
Share on other sites

For my wheeler I have an steel bar with a pivoting T and loop on the top, I have a small rope connected to one end of the T pull the rope the T pivots and becomes a straight bar, drop it in a hole release the rope the T opens under the ice, walla an anchor to winch from. when done pull the rope collapse the T and I am on my way. Easier to carry then a log

Link to comment
Share on other sites

Please dont use SALT on the ice. How would you feel if the next truck to follow your tracks had a family in it that fell through and drown because you used salt and softened the ice.

Then why doesn't everyone fall through the ice right at the landings...think about how much falls off your tires and wheel wells right there!!

Enough salt to get your self un stuck isn't going to cause a family to die.

Link to comment
Share on other sites

I'm not real hot on the salt idea but the carpet idea really sucks if you don't go back and pick it up. One year on Bald Eagle I could have had enough to re-do the rec room. That stuff would have laid on the bottom of the lake forever it I hadn't chipped it out. Clean up after yourself.

Link to comment
Share on other sites

I'm a firm believer in tire chains; and in putting them on before I get into trouble. I also used to carry asphalt shingles and put one under each tire, gravel side down, to get me rolling. In the back of my truck right now, I have one tow strap, 30 feet of chain, and a 50 foot cable with hooks. They've helped me and several other people.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.