Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Keeping your feet and toes warm?


mr_jman

Recommended Posts

I like to use the house but even in my portable my feet still get cold. It tends to get even worse on open ice. My feet also tend to sweat when I move around making them get really cold when I sit on a hole for a while.

I'm just hoping for some imput on how others keep their feet warm, or certain boots or socks that breathe well and keep your feet and toes warm on the ice!

Thanks

Link to comment
Share on other sites

I keep my torso warm and that will keep your toes and fingers warmer. When you get cold your body just tries to keep your major organs warm and does not circulate as much blood to your fingers, toes, and ears.

As for boots I have some Irish Setter with 800 grams of thinsulate and Gore-Tex. I wear thick wigwam wool socks and liners to help wick away moisture.

Link to comment
Share on other sites

I have some waterproof Sorels and wear wigwam wool socks. I also have vehicle floor mats that I can put down on the ice in the portable to keep my feet off of the ice to help as well. I haven't needed to use the mats yet, but it's helped my kid's feet stay warm.

Link to comment
Share on other sites

I wear some Trackers that I got at Wal-Mart a few years back for like $15 on clearance. They are camo and go about half way up to my knees. They are also waterproof, and after drilling hundreds of holes and pulling the auger up and soaking them, my feet have never gotten wet. First few times out in them, I wore wool socks over regular socks and my feet would sweat, so I ditched the wool socks and now only wear regular socks, and my feet stay warm. I have to say, for $15- I am extremely happy with them

Link to comment
Share on other sites

Buy yourself a good pair of pac boots but get them a size or even two sizes too big. Make sure you have room for good sox and can still wiggle your toes. As long as you have good circulation to your feet, they will stay warmer than if you have tight boots.

Link to comment
Share on other sites

Along with getting yourself a nice pair of boots, Socks are just as important. I use a pair of wick socks then some nice wool socks. This should help your cold feet.

If that doesn't work, try using some feet warmers. They are just like hand warmers but long and narrow that you lay in the bottom of your boots. They usually last 4-6 hours. They can get a little too warm at times. I only use them in extreme conditions.

Link to comment
Share on other sites

As mentioned get a good pair of Pac boots. I highly reccomend Cabela's Predator Extremes! Get one size larger then your normal walking boots.

Wear one pair of light silk or poly socks and then add a good heavy pair of WigWam wool socks.

My feet were also always cold until I got the Predator Extremes!

Cliff

Link to comment
Share on other sites

When I fish in my house I have a couple of 2x10 boards I put down to put our feet on so they are off the ice. Helps to keep warm. I also got a pair of Micky Mouse boots and they are very war. I just wear wool socks in them and never have an issue. If I wear my old pair of boots I have some insullated socks I got at fleet that I wear over my wool ones. Mickys are great though and very warm. Saw them at fleet for $40 and you can't go wrong for that price.

Link to comment
Share on other sites

That is a very good point Sandman. Getting your feet of the heat absorbing ice will also help retain the heat in your feet. You said it gets worse on open ice, that would be because your standing most of the time and your feet are always on the ice. When your in you shack your sitting and you can prop your feet up.

When looking at a pair of boots make sure they have good insulation between your feet and the rubber soles.

Link to comment
Share on other sites

I'm still wearing my LaCrosse Icemans that I bought over 20 years ago. The leather is showing a little wear and signs of drying a bit and the tread isn't as deep as it once was, but after many, many miles walked while busting through briars and brambles deer hunting, ice fishing, shoveling/blowing snow and the like, they are still class A boots. The only time my feet get cold are after hours of inactivity in very cold weather. The key is the thickness of insulation between the sole of your foot and the bottom of the boot.

They are about ready to be retired though, and moved to backup status. From recommendations here and on other sites, as well as reviews on the Cabela's web site, my next pair of boots, most likely next fall, will be Predator Extremes. I've heard/read nothing but good things about them.

Link to comment
Share on other sites

Ice Kings for me too. Since I have diabetes I do have reduced circulation (and feeling) in my feet. I wear a long silk liner, and a very good pair of Smartwool socks over them. The boots are a size and a half larger than my normal size which gives my feet lots of room to move. I also carry some foot and hand warmer packs in my tackle box, just incase something needs warming up. Keeping your head and hands warm will also help keep your feet warm. Moving around once and awhile helps too. I also screwed in some sheet metal screws to provide traction on the ice.

Link to comment
Share on other sites

I have a nice LaCrosse pair of boots that I got on sale about a year ago at the end of the season. They are rated for -40 or lower. I will have to get a few nice pairs of socks I think. I would usually go sockless so the boots soak the sweat and this seems to work better for a while. I will have to pick up some wool ones or look into some of the other boots mentioned. Keeping the hands and feet warm make for a more enjoyable fishing trip in my opinion!

Link to comment
Share on other sites

 Originally Posted By: mr_jman
My feet also tend to sweat when I move around making them get really cold when I sit on a hole for a while.

Well, if your feet sweat for whatever reason, you're gonna get cold during periods of inactivity. What works best for me is to hit the problem at the source. Spray your feet with antiperspirant prior to donning your socks and boots. You will be pleasantly surprised at the results.

Link to comment
Share on other sites

 Originally Posted By: Sandmannd
When I fish in my house I have a couple of 2x10 boards I put down to put our feet on so they are off the ice.

Yep, I agree, get your feet off the ice if you can. Hard foam insulation works great too.

Link to comment
Share on other sites

Getting your feet off of the ice makes a difference, regardless of boot/sock set up.

In the portable I have a small square of the pink high density insulation. Set it on the ice while you are fishing and it makes a difference. In using small enough squares it travels well and doesn't break. I've been thinking of trying the anti-fatigue mats also, but haven't yet.

Link to comment
Share on other sites

Well my feet sweat and i would reccomend using the bunny boots or mickey mouse boots or whatever they are called, the originals made by BATA are quite nice, my feet sweat but they still dont get cold its quite nice, just need a long pair of socks on when you wear them.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.