Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Any body have issues with Kent Shells?


Recommended Posts

Thru some good words on this site, i decided to try kent steel shot this year. (along with the reasonable price)

I have a bennelli M1Super 90 12 ga auto 3". After shooting (or trying to) 3 salvos at 3 different groups of geese, the 2nd shell has failed to chamber...it jammed and doesn't align as the tip of the shell hits the side of the chamber.

I have had this gun for 6 or 7 years now shooting federal rounds and it never happened. Yes the gun is clean.... grin.gif

The above happened on 3 seperate mornings Goose hunting. And then i go to the gun club and fire off 150 rounds of low brass federals with no problems.

Has anyone else had any issues with Kent ammo?

If i can find my receipt, i'm going to trade it in for something else.

Link to comment
Share on other sites

Funny thing you should mention that. Opening weekend I shot some 3.5" Kent Shells I had left over from Snows this spring. First flock came in and I got 1 shot off. The other shells jammed up. Next flock, same thing! I attributed it to pre-season excitment and haven't thought much about it. Funny thing is, since then I have been shooting Federal shells and have had zero problems.

Link to comment
Share on other sites

i'm pretty sure there was a thread on this a little while ago, seems every gun/shell combo is different, i shoot a rem 870 and have the excact same problem shooting winchester Xpert shells, others with the same gun had problems with federals, kents flow threw my gun like butter and pattern awsome, so thats what i shoot most of the time, i would just find a shell that works with your gun and gives a good pattern and stick with it

Link to comment
Share on other sites

Kents flow through my benelli like butter also, but I got a nova(pump) they never jam grin.gif I have not heard of one problem with the kents jamming and I know quite a few guys who use them in autos. If federals work for ya I would stick with them.

Link to comment
Share on other sites

My Ben. SBEII does not like 3.5 kent shells. Same problem as you described. Measured the shells. 1-3 milimeters longer than the other brands. Some guns will work with them, others won't. When shells are cheaper there is a reason why. Never buy cheap shells. Might not have any problems at first but you don't want it biting you in the a** at that important time.

Link to comment
Share on other sites

Kent shells are usually a little more spendy than the regular federals. Not sure if it has anything to do with cheaper shells. Shell pricing has alot to do with brand name, but I wouldnt doubt a little size difference from brand to brand. Anyway, I love Kents. This is the first year i have shot them, but they were the best brand for my gun I have found so far. Maybe its just a bad batch that they manufactured for those of you whos guns wont take it? Good Luck in the field!

Link to comment
Share on other sites

I have been through 4 cases of 3" and 7 cases of 3.5" Kents over the last 4 seasons and have not had one single jam in my Browning Gold. Remingtons on the other hand are a problem in my gun. Like mentioned above, certain shells work better in certain guns. I think it goes beyond gun models all the way down to individual guns.

Link to comment
Share on other sites

I have the exact same gun-Benelli M1 Super 90, and have shot probably 2 cases of Kent 3" through it so far. It has NEVER jammed then or with any other size or brand of shells I've put through it.

One thing to check might be the magazine to make sure the spring is working right or nothing is stuck in there. I've had a little stubble and stuff in there before and could see how it could have caused problems. Now I check and clean it every few weeks of the season. Good luck finding the problem, let us know if you find it!

Link to comment
Share on other sites

I have shot Kent for the last couple of years mixed in with some others. The one that I found that will jam or get stuck is the pmc stuff. Not something I would EVER buy again. kent has NEVER jammed or mis-fired. I have shot over 2 cases a year for the last 5 and no problems.

Link to comment
Share on other sites

You know the funny thing is when i load three 3" Kents in - to do a rapid fire test to see how it works, they fire seemlessly with no problems. It was just the 3 different times i was firing at Honkers with flaps down when it happened. I hope it isn't just Karma finding me... grin.gif

I think i'll pull it apart and lube it up again and check that spring and see what happens.

I'm not bashing kent by anymeans here, i just wanted to see if it was a bennelli / Kent thing or just my gun.

Link to comment
Share on other sites

I think your problem is the gun, I'll take it off your hands for a mere $100. Heck I'll even take a personal check. Just include it when you ship. grin.gif

Seriously, If your gun doesn't shoot Kent's it's not the end of the world. Use what works best (pattern it too) I would try to stick with the high velocity rounds as they "hit" much harder. I've got a Gold 3 1/2 that HATES winchester shells, which WAS all I used to shoot. Now I use Kent and after 2 cases so far so good.

Link to comment
Share on other sites

I've shot kents for the last 4 years in my Extrema I. It's never jammed once. I did have 2 shells that basically belched out with no power, maybe the shell got wet?

Overall they are a nice load that is very hard on ducks and geese.

Link to comment
Share on other sites

I have a Benelli Nova and a M1 and have had only one problem in 3 cases. I had the brass fall of one of the shells with my Nova. If you have a problem send it back to kent and they will take care of you. I have had a lot more problems with Federal, mostly the wad was not expanding, so it was like I was shooting slugs. I exploded a few ducks. I like Kent and wouldn't buy anything else for waterfowl.

Link to comment
Share on other sites

I shot Kent for years until I had customers coming in with blown up barrels. 3 blown barrels in four years, all from Fast Steel. They do have a better crimp than most shells and when they open up they are a little longer than most and some guns jam because of this. I never had one jam. I just stopped shooting it because of all the blown barrels coming in that were shooting fast steel. And yes Kent did back the barrels, but who wants a barrel blowing up in there face? If i want to gamble that bad I'll buy a scratch off.

Link to comment
Share on other sites

On a second note. Kent gained its reputation for having Fast loads. Yes they do but if you take a box of Federal Premiums they are simular in price same speed, and are plated. We all know that plated shot penetrates better, so why shoot the Kent. They don't offer rebates, and are seldom on sale. I just don't know what is so good about them, other than a Chevy Ford thing. Thats what my buddy shoots or something like that, or if its not broke don't fix it idea.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.