Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Does anyone really FLIP?


EBass

Recommended Posts

Do you use the flipping switch?

I pitch a jig and thumb the reel, but I have never flipped per se. I never bought a flipping reel. Is that more of a down south thang with all the heavy cover? Who does it and for what situations?

Link to comment
Share on other sites

EB -

I have flipped some but not very often - heavy cover where the openings to get through are limited is when I do it most often. Mostly it strikes me as a lot of unnecessary work but the entries are usually both more precise and quieter.

Come to think of it I have not seen anyone else actually flippin' while I have been out on the water either....hmmm

Daze Off

Link to comment
Share on other sites

I flip docks after I have searched the outside. I will move right in close and flip between dock and pontoon boats. Good way to get to inside tee docks. Either a jig or a worm. I also have a couple of stump filled lakes that I fish and that is about the only way once the pads fill in to get in tight right next to the stumps and fish them. One lake has a lot of ceder stumps and a few inches can make or break you. I do have a flippin reel and it is nice to be able to just drop a lure and set in one motion. Takes some practice to get it all done with one easy, fluid motion. Also a fun way to fish with live frogs, flippin them up and under boat lifts.

Link to comment
Share on other sites

I skip under docks and overhangs. I pitch a heavy jig and TRY to make a soft entry. Just no flipping for me. And as the fog lifts from my memory I did buy a flippin reel a few years back. I never used that feature though. It's more if you're a rod's length away and you need to set that jig right on it's face. But up here for the most part the water is clear and I'm trying to stay as far away as possible yet make accurate casts. Thus I skip, and side arm. I pitch to, but I need to keep working on that. Pitching is an art.

Link to comment
Share on other sites

Yes I flip. Usually dirty water/heavy cover combinations or floating bogs. But I do not use the flipping switch. More walleye guys use the flipping switch than bass guys. If you rigging or dragging bouncers it's a really nice feature to just depress the line release and let out as much or as little line as needed to stay in contact with the bottom, all with only one hand.

Link to comment
Share on other sites

Flipping is where you have a set ammount of line out and then pull the line from between the reel and the first eyelet with your non-rod hand. You then swing the lure twards your target and let the line out with your other hand. No line goes in our out of the reel at all.

With a lot of practice, you should be able to put a jig inot a coffey cup 8-10 times if not 10 out of 10.

Link to comment
Share on other sites

I flip, but it is mostly limited to river fishing. And, it's mostly targeting smallmouth bass. And, to top it off, it is rarely with a 7.5 foot flippin' stick. I would have to demo to explain what I'm doing, but if flippin' is fishing with a set length of line that's what I'm doing. River walleye guys do the same thing.

Otherwise, I primarily pitch. There's too much clear water in Minnesota and Wisconsin to make close contact fishing really effective.

Link to comment
Share on other sites

I do a ton of pitching but rarely flip. Maybe it's something to add to my arsenal. I've seen one guy in my years of fishing that did it a lot. He was very efficient and used to win more than his share of tournaments too. He flipped during prespawn, spawn, post spawn, summer, fall....you get the idea!

Link to comment
Share on other sites

I will never buy a reel with a flipping switch. Its point this in my opinion. The new Revo is a reel to have for flipping and pitching because it is small. wink.gif

If I’m flipping it will only be in dirty water. I don’t like being really close to the cover and in clear water, you just can’t be. I have gone behind people flipping on Forest Lake…back away and made a good pitch to the same cover and caught fish. I learned ones that if you can see a fish Odds are it can see you to. I like to back away and make a good pitch instead. I guess the only time I really FLIP is on mats. When it’s right next to me. But I have a lot of confidences in pitching so that why I keep doing it.

My .02 I hope this help EBASS & Everyone smile.gif

Link to comment
Share on other sites

I'm in the market for a pitchin'and/or flippin' stick and was wondering what preferences are out there for rod action and length for each technique? Is there a rod action and length that is conducive to both? What lines do you guys use for these techniques?

Link to comment
Share on other sites

The CRCX76MH CrucialFlipping stick retails for $159.99. And from looking on their web site, I dont see the Compre Flipping stick this year... I know last year they had a 7'6" teliscoping flipping stick.. but I dont see it listed on thier web page for 07'. It reailed for like$120 ish I think.

Link to comment
Share on other sites

RickyB -

You can get a 7'6" Clarus flipping stick for around $70. Clarus rods are actually pretty nice for the money. Weird that they don't have a Compre flipping stick this year. If you can flat the extra $$ the Crucial is well worth it though. Awesome rods...

To the original question.... I definitely flip at times in cane or really thick rushes. Probably pitch more than I flip but will do both depending on what I need to reach and how thick the cover is. I have a deep-V multi-species boat so I'm a ways off the water, which means I can have a little more line out and flip a little farther than guys in a bass boat can. Also means I can pitch with a flipping stick, so I usually don't switch rods to do either or. Do have some reels with flipping switches. Great for bottom bouncers for walleyes smile.gif Only flipping switch reels I do use for flipping are a couple old old Chronarchs (think that's what they are - don't have 'em in front of me. They might be Scorpions...) that had the thumb bar you could flip up and down with your thumb.

Cheers,

Rob Kimm

Link to comment
Share on other sites

I don't flip. I guess I havn't seen the need for it yet. I just started pitching last year. I love it! I had a lot of success with it. I love the accuracy and stealth of the soft landings. It seems for flipping you need a pretty consistant line of heavy cover.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.