Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lets hear more about frabill and eskimo


fishingguy

Recommended Posts

I have a Frabill XL Twin and I think it is a good choice for a flipover. The quality seems to be good, it is easy to set up and take down, lots of room inside and the seats are very comfortable. With the black material there are days that I don't have to start the heater until the sun goes down. I put hyfax runners on it the other night because I pull it with an ATV and it should be a lot easier on the sled.

Link to comment
Share on other sites

I bought an Eskimo quickflip sport last year--I love it!!!

You cant beat the price--$179n at FF--and thhe size is great! Long skirt,nice extension.Holds in heat nice,and very light..I can fit my auger,two 5 gal buckets with gear,FL18,Coleman powercat,and a sixer just fine,,not to mention the limit back to shore!!

Link to comment
Share on other sites

Cold one SD:

Can you please send me an email or post how many hyfax runners you used and where you installed them? I want to do mine but am worried about the mounting hardware interfering with the adjustable/removable seats.

[email protected]

Thanks

Fishinguy:

I agree with all that cold one SD said and I love my Frabill XL-Twin. I especially like that you can stand up straight in it. I have a bad back and it helps me to be able to stand up straight and stretch every now and then. I also really like how much room it has in between the sled and the door. Plenty of room for multiple holes and equipment. It's light enough that I can pull it full of gear by myself and it fits perfectly in my Jeep Grand Cherokee. You can check out the modifications I made to it in the portable modification thread.

Hope this helps!

Link to comment
Share on other sites

Last year I purchased a Frabill ranger triplex, it's worked out great so far. The only fault I've seen so far is the canvas is plenty large for the frame. The modular seats are comfy and everthing sets up easily even alone. This years model is even better and I kinda wish I would have waited.

Link to comment
Share on other sites

Last season, I ran with the Tri-plex and I have to say that I was totally impressed with it overall. Even loading it by myself into the back of my Chevy short box never presented any issues!

This year I'm going to be spending much of my time fishing out of a Frabill GT Prowler. Two person rather than three and plenty of space between the sled and door! Frabill re-invented the sled design and came up with the GT series which translates too "Glide Trax". The concept behind this new design is interesting, this design should make travelling through snow much easier. I guess I'll have to wait a "little" longer before I can test it out!

Link to comment
Share on other sites

Well, I was on the maiden voyage of the Tri-Plex with you last year... can't wait to try this one out wink.gif!!!

100_0453.jpg

Better add this one showing the seats, too.

DSC00678-1.jpg

And who could forget "Rasta Jimmy"20912Bob_marley.gif???

100_0481.jpg

Like Stu, I can't say enough about Frabill, either. Totally fishable and all day long comfort cool.gif!!! You won't be disappointed.

Link to comment
Share on other sites

I'll have to admit, the Eskimo Quickflip is a pretty good value. MY buddy saw a friend and I buy Fishtrap's. He didn't want to spend the kind of money to get one of those or an Otter. He chose an Eskimo and I'll have to say, the tarp, the window covering, tube and bench seat (comfortable too) have held up very well.

If you are looking for a decent priced portable, I'd recommend one of these.

Link to comment
Share on other sites

I own a QFII and I love it for me and the kids.Should I buy a new shanty of the same size it just might be a shappell Rover 2.0 my friend has one and it has some great features like two D doors to get in and out.

Link to comment
Share on other sites

I too have a QFII and absolutely love it! I have the bench seat which is held up great....I do wonder if the 2 swivel seats would be a bit more comfortable though...but the bench works great. It's light enough, easy to set up, and holds everything I need to use on the lake.

Link to comment
Share on other sites

I bought an Eskimo QF2 last winter, after ice season I contacted the company because a window cracked, the canvas was coming unstiched, and the sled had worn through ( I only pulled it by hand).

they sent me a brand new one, no arguing at all, that is customer service!

As far as use, I love it, I fish alone 75 % of the time, but when the urge hits my kids, 3 of us can fit comfortably.

Alan

Link to comment
Share on other sites

I had the same problem with the windows in my Quick Flip III. I tried to stuff the sides in while packing up one night. It was about 20 below 0. You'd think that they would have tested the plastic in sub zero conditions.

Link to comment
Share on other sites

I have the frabill XLT. I don't get to use it as much as I'd like but have no complaints other than the fabric tends to flap a lot on windy days. But as the others said, there's lots of room, it's farily lightweight, and easy for one person to set up and take down. I bought it only because of a good deal I got but would definitely consider it in a future purchase.

Link to comment
Share on other sites

I have the Eskimo QF 1 & 2. The movable seat in the one Man is hard on the butt. Remedied that by installing a Swivel base and a Boat seat. Total comfort now. Easy to set up and lots of room. I really like the half-position the tent can be locked into when you want to fish in the open.

As for the QF2, I had the same problems with the plastic side windows. These were taken back to where I bought them and replaced quickly. Overall I had no complaints for being a 2 Man Tent

There are just too many different styles and varities for the Market. Each probably with their Pros and Cons. When you get one, then you can always mod it to what you want with very little complaints( as per previous post on Sled Mods, thanks guys for your pics and ideas!) Good luck on the Hardwater season !

Link to comment
Share on other sites

I am going on year 3 with my QFII. I like the unit overall and have no real complaints. One of the little snaps in the pole broke but the company quickly set me a lifetime supply. It is perfect for one guy with a ton of gear. You also can easily get a second guy in to fisn as well.

I have the bench seat and it could provide a bit more back support and comfort but certainly meets my needs. I would recommend it to anyone as it is a good overall bang for the buck.

Mine is set up in the third stall of the garage as I type as I needed to do a quick inspection.

Link to comment
Share on other sites

I have the QFIII. It's a very nice and roomy flip over.I also have the bench seat, and like many said it could use better back support. Have you guys seen the new QF they have better bench seats now. It's actually a tri-fold bench seat with better padding.

Link to comment
Share on other sites

I Have the QF3 and am very pleased. Mine has the two seats I prefer them over the bench seating. No problems with windows cracking. It doesn't matter what brand of house you buy the windows may eventually crack. A nice feature that I see on the newer Eskimo models is that the windows are removable therefore easily replaced if the situation arises. I can easily pull it by myself or have room for my family(4 of us)I made a couple of cheap wood seats for the kids and it works for us for a couple more years I'm hoping. I would not hesitate to buy another Eskimo house.

Link to comment
Share on other sites

I bought the Frabill XL Twin last yr. and love. Nice and light weight. Seats are very comfortable. I like that the windows are detachable with velcro. Also very roomy . Front extends out nice and far.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.