Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

4-7ft water walleys?


Recommended Posts

this last weekend the only depth we could pick any eyes up were in that 7ft area of water. I was a little confused but just rolled with it and picked up a few nice ones around the local lakes. I talked to some other guys who said that they caught most of theirs in that depth also. this was in the middle of the day from like 11-3. Surprising?

Link to comment
Share on other sites

Nope, especially not in the southern portion of the state. In fact, I know a guy wink.gif who would consider that deep...and in the "dead" of summer to boot. grin.gif I'm sure he'll chime in on this one. wink.gif

Link to comment
Share on other sites

If you are on the river, I regularily fish in water less then 5 foot deep. I talked to a guy last weekend who had a hard time trolling as his T8 kept hitting ground.

Fish are were you find them, don't let preconceived notions stop you from fishing area that hold fish grin.gif

Link to comment
Share on other sites

We were on Vermilion. Saturday was calm and we finally found them in decent numbers when we worked midlake structure topping out at 15' with 25' to 30' nearby. Later in the evening they were found shallow.

Bob

Link to comment
Share on other sites

When fish are shallow, they usually have one thing on their mind....Food! I'd rather fish active feeding fish with aggressive techniques vs neutral fish with lighter techniques. That's why I too enjoy fishing 12 feet and less. Wind and baitfish can really help you cut down your search for these fish too.

Link to comment
Share on other sites

I think the water is a little warmer than normal for this time of year. I typically see a shallow day pattern closer to June, when young-of-the year perch get to an appetizing size and roam water 4-7'.

I would prefer to cast to these shallow fish than drag deep any day, its a hoot.

Link to comment
Share on other sites

Quote:

I think the water is a little warmer than normal for this time of year. I typically see a shallow day pattern closer to June, when young-of-the year perch get to an appetizing size and roam water 4-7'.

I would prefer to cast to these shallow fish than drag deep any day, its a hoot.


I'm with you as those eyes up shallow are agressive.

Link to comment
Share on other sites

I don't think we have had a walleye caught out of water deeper than 13 feet on any of our trips so far. I've had two trips this past week that the gulp 3" minnow (smelt color) out fished both fatheads and shiners by a good margin.

Link to comment
Share on other sites

We fish it just like you would a live-bait jig & minnow. I'm getting less and less skeptical of gulp. Last year drop-shotting gulp leeches was great and so far this year gulp has worked well for us.

Link to comment
Share on other sites

3to5 feet for opener on shallower lakes for kandi county,now 5 to 8 feet is good in some larger lakes.

3 weeks from now as water warms maybe a little deeper,and mid summer to fall deeper still.

water temp on opener was 55,last week on Green 58,its keeping fish real shallow.

Right now its 58 to63 depending on time of day and wind clouds etc.For one week walleye have been biting at 8 to 15 feet right at end of bars that quickly get deeper but not off sides.

agape were using both the 2 inch berkly,and shiners.Guess what they have discontinued the minnow colored 2 inch.

Good Luck

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.