Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Base Layer?


BucketButt

Recommended Posts

I use silk long jons, 300 weight polar tek fleece wader liners, under uninsulated guidewear bibs. If mild a pair of jeans under the bibs is plenty. Same routine on the topside with added layers of fleece when needed.

Someone decided they liked my insulated Guidewear parka more than I did and lifted it a couple winters back in a local resort pub. Darn terrorists....I mean tourists!

fiskyknut

Link to comment
Share on other sites

I use the Cabela's Medium weight Polartec Power Dry tops and bottoms as a base layer, very similar to the Under Armour. Above that is usually a Polartec fleece layer of somesort (or fleece w/windshear shell) followed by a shell. I've felt very comfortable using that setup for steelhead fishing in the fall, ice fishing, and the early C&R trout season. If I was sitting still I might go with a heavier base layer.

Link to comment
Share on other sites

The above mentioned is very nice and more comfortable than Under Armor. I use UnderArmor for doing winter swat training and it helps alot with excessive body heat and sweat build up. Yet, it's pricey. Only wore it once during ice fishing and could have done w/o it due to mobility.

Link to comment
Share on other sites

DinkADunk, you mentioned using Polartec fleece. Have you, or anyone else here, tried it as a base layer for more stationary ice fishing? I'm looking at ordering a Polartec shrit from Cabelas. I'm normally pretty warm with a shirt, a sweatshirt, and my Carharrt bibs, but I'd like to get a non-cotton base layer, and I think Polartec might be the answer.

Link to comment
Share on other sites

I srent the $110 on tops and bottoms for deer hunting this year, I really like it but, I have a workout to get to the stand and that was why it works so well. If your not creating persperation dont use it. It is designed to wick the moisture away from your skin to keep the skin dry. It works well. I dont know how well it will work for just being stationary and using as an under layer? I do have to say the tightness goes away soon after getting dressed. Just my opinion.

Link to comment
Share on other sites

I just got my cold gear in a couple weeks ago and had a chance to try them for the opener this morning. I tell you what i was sweatin my @$$ off by the time that I got over the top of the ridge at 6 this morning, never got cold though. it wicked the moisture away perfectly. I had on a long sleeve tee and fleece pullover over top the cold gear. I also had the gps in the fleece pull over and unzipped the bibs to check the time on it and it actually felt good to cool down(this is at noon) Under armour cold gear and some fleece is going to be my go to for ice fishing this year for sure!

Link to comment
Share on other sites

I use Cabela's Tech Silk Weight as a base layer and then use either Cabela's Medium or Heavy Weight ontop of that. I have fished out in the open with that under fleece and a rain suit in January and I have been pretty comfortable.

Link to comment
Share on other sites

i use good'ol cotton longjohns under a sweatshirt and a carhartt coat, and some u.s. army issue pants with the insulated liner and wool socks, always seems to keep me warm enough, i guess thats what i've always worn so i haven't compared it to the "fancy" stuff like under armour or polartec

Link to comment
Share on other sites

I have been wearing Cold Gear under armor the past 2 years and have been comfortable with it. I normally where size XL for shirts and bought my UA in a XL. It isn't restrictive-merely acts as a piece of extra skin so it is very tight to my body. Wicks away sweat and keeps you warm.

I then put a polar weight polar tec fleece top over that with a windproof jacket and then my ice armor jacket. Haven't been cold yet with that combo!

I'd stop into REI or take a look at their HSOforum. They will definately be able to hook you up with the right cold weather gear.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.