Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Differences between 1man shacks?


rbandsasha

Recommended Posts

I have a larger hub style shelter to use when with others but I am looking at a 1 man for the times when I go by myself or with someone and plan to be a little more mobile.

I have looked at the Clam Pro and Kenai. For the new shacks I know the Pro has the thermal top and obviously there is a price difference. Those items aside, I still have a few questions for those that may have insight.

A couple of questions, where do you put your auger with the 1 man shacks? With the seat mount, a bucket, flasher, heater or whatever misc. gear, I am not sure a power auger would lay on top without falling off.

With the pro are you able to move locations without having to retract the poles? A 2 man I have previously was a pain to move because the tarp of the shack drug on the ground when flipped all the way open.

Next, I am 6'3 260. Is the kenai too narrow at my size? I sat in one in a store today and seemed fine but hard to tell.

Any other thought on the diffences would be appreciated.

I like the width of the pro but the solid poles/instant flipover of the kenai. Help me decide.

Thanks

Ryan

Link to comment
Share on other sites

I would go with a 2 man for myself for some reason the designers must be like 115lbs with 2 cement blocks when they figure a one man or 2 man.Just always seams like the 2 man is more like a 1 man and a 3 man is more like a 2 man. But I am not little man I got some shoulders on me lol.

Link to comment
Share on other sites

You might want to look at the Nanook. It is great for one person. I have both the Nanook Thermal and the Pro TC. The Nanook is a bit heavier but it provides more storage in the sled. The Pro is nice because it is light. The downside to the one man houses is hauling all your gear. I usually put my auger in and have the drill portion sticking out to the side. You really can't go wrong with either one.

mw

Link to comment
Share on other sites

I just got the kenia this year and I'm 6'1" about 240 and im very comfortable in it. The one thing to think about is it comes with a bench seat that isnt very comfortable but a boat seat fixes that problew for you. there isn't tons of extra space for gear but I havent had an issue yet.

Link to comment
Share on other sites

I have a scout which is an inch wider than a kenai and a little shorter in height. I'm 6 ft 270. I fish just fine in it. I mounted the seat a little off center. My tackle box flasher and ice scoop goes in the narrow slot next to the seat. My rod bag heater and cooler go into the wider slot on the other side of the seat. I keep one pound propane tanks in the sling underneath the seat. I lay my auger on top and bungee it down. works great. it has a door but i never use it because its like 4 feet tall.

Link to comment
Share on other sites

With the pro are you able to move locations without having to retract the poles?

Ryan

Yes... I have a pro and when you flip things over to move, most of the material ends up on the sled, no need to retract poles. Most of the time I set up the support pole to make it a wind break - when moveing alot your not opening and closeing it all the way. If it is real windy you dont want to set it up that way. cool

I liked the Pro over the others mentioned becuse of weight and the extra width...

Link to comment
Share on other sites

p.s. - The pro can be used as a 2 man if needed. With the seat slid to the side and a cooler/bucket added, 2 people can fish in there - 2 holes, 2 flashers, and a heater. I go about 3 bills and my wife and I have used it a few times when I didnt want to drag the 2-man or we were not going to be out long...

Link to comment
Share on other sites

I am biased but definitely look at the otter cottage. I use mine solo haul it by hand. Long enough that it has a logical place to stow your auger. Durable sled. Room for two if necessary. I chose it over the pro two years ago and am very happy with the decision.

Link to comment
Share on other sites

Thanks for the replys so far. Clam is what I listed as that is all I have been able to sit in when looking is stores.

A couple of other things, this is only going to be pulled by hand, no wheeler or sled. That being said, my biggest concern is still where to put the auger and how to prevent gas spills from tipping, etc.

Thanks again.

Link to comment
Share on other sites

when I use my Kenai and I am pulling by hand I lay the power head on the bench seat and run the auger shaft across the top of the sled. as for leaking make sure you lay it on the seat with the tank up and make sure the cap is tight and the air breather screw(if your auger is a older tecumseh model and not a new solo) is shut tight. as long as everything is tight you should have no leaking. to test this I held my auger(20 year old Strikemaster MagIII Plus) upside down and had no leaks. I can take a few pics tommorrow of how I pack my Kenai when I hand pull it and how I put the auger on top. the thing to remember with a one man shack is to bring only what you need and nothing extra.

Link to comment
Share on other sites

I'm 6', 196 or so, and I love, love, love my little Clam Scout. Two rods, vex, scoop, bucket, black cat.... I can load it in and out of my truck without unloading it. Lay an auger over the top and go. There isn't any extra space, I suppose, but then again I'm out there to fish, not dance around in a shanty. Need to stretch? Flip it back and move. Need to warm up. Kick your slush against the inside walls and turn that little cat up. I even drag mine when hole-hopping. It's easier and faster to drag than carrying a bucket.

Link to comment
Share on other sites

i have a kodiak one man and a x2 two man. Go get the kodiak, sets up in a instant, pulls good, light, good materials, seat with backrest, plenty of tub space.

do it you wont regret it. put a couple of them prostore led strips in there and go fishing

Link to comment
Share on other sites

I have an otter den, but would really recommend the cottage. It is a bit wider than my current sled.

I love that the otter 1 mans are a bit longer than the others and you can easily fish 2 holes inside.

I also love that it is on a real sled that is durable and can be pulled around without having to worry about it, and you have a lot of room for storage in it. I can easily fit my power auger in it, along with my bucket, heater, and seat, with plenty of room left over.

The otters are not the lightest house in the world, but probably the most durable. I highly recommend the cottage portable for one man.

Link to comment
Share on other sites

I bought the new Otter thermal Cottage and absolutely love it. I got the optional tackle caddie box which is an awesome accessory to hold all my stuff. Plus, the seat and caddie are easily removed for easy loading and unloading. I've had Clam in the past and will never go back. Big upgrade in overall quality with the Otter, plus the thermal material makes a huge difference in keeping it warm.

Good luck!

Link to comment
Share on other sites

I am 6'1" and 275lbs and I have a scout. While I can fish out of it OK it is tight very tight. If I lean back at all my head hits the top but it is not too bad. I can fish too holes in it, barely. I have the cover and when pulling it by hand I will place the 5 gal bucket with minnow bucket inside on the right of the seat, the buddy heater under the seat, rods in the compartment under the seat, flasher behind the bucket and cooler behind the flasher. I then place the cover on it and set the auger on top. It will usually stay there without being strapped. If I pull it with the 4 wheeler I put the auger,flasher and 5 gal bucket on the 4 wheeler so they do not get beat up.

It is a really nice setup but I will be upgrading to a jason mitchell pro or a hub to get something bigger.

I went with this like said because you do not have to extend the poles but it is too short and a bit to narrow. 4 inches taller and 6 inches wider and it would be perfect.

Link to comment
Share on other sites

I'm 6'1' 240 and have no issues with the Kenai. I like the fact the I can just flip it and be fishing in seconds ,its very mobile for hole hopping. I like the fact of no expending poles so no cold fingers from expanding poles in the cold! I like the bench seat as I do alot if sight fishing and jigging in shallower lakes, backwaters. I am usually leaning forward so the seat backrest isn't an issue for me. THe only this I don;t like is the seat height, but I didn't like that on any house that I sat in, so to solve that problen I just bring along a square boat seat cushion and that help get me elivated about 3 inches and that allows my knees to be at the same height as my hips. THe best way to find out what you want to to go into the stores and sit in them flip them over and give them a test run. I also asked a few fellow angler when I was out about how they liked there house and they gave me many likes and dislikes. Many actually asked if I wanted to sit in ther house and give it a teat run. I far as the auger store goes mine fit nicely between the tub and the frame of the seat, i usually bungee cord it in.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.