Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

how do you carry all your tackle?


mrpike1973

Recommended Posts

I use a small quik draw tackle box. I forget who makes them but it has two bigger cases and one smaller one in front. Easy to get at with just a buckle and then flip it open. No zippers it's a perfect size for ice fishing gear. I bought one for an ex-gf and it dawned on me that it would work perfect for ice fishing. Of course hers was pink so to keep my idle hand from "borrowing" it. I wanna say it's a flambeau?

Link to comment
Share on other sites

tackle bag. have a bunch of interchangeable plastic boxes for it. what ever type of fishing I am heading out to do, I just swap them out. fits two large and two small. two side pockets where i keep a knife, mouth spreader, hemostat, clippers, small extra spool of line, and reel tape. whole thing is maybe 5x6x10 plano i think. cheap, but it works just like i need it to.

Link to comment
Share on other sites

I use a small Rapala tackle bag for my ice stuff. It was like 20$ and is waterproof so it has been pretty nice. If I remember right it might have even been advertised as a lunch box/tackle bag when I got it cause its got a little insulation in it. Works pretty good though.

Whatever you get make sure its a bright color so you can see it when it falls out of your sled when your going across the lake...

Link to comment
Share on other sites

When the ice is thick enough to use a 4 wheeler or S.M. I use a small tackle bag,about 5by 5 by a foot. when I have to walk I use a 5 gal. plastic pail, put jig sticks and extra tackle in it,hook it on my hand auger handle, stick the auger over my shoulder with the pail towards my back.

Link to comment
Share on other sites

I use the small Rapala tackle box as well. Got mine at Target as a gift for my 3 year old nephew, then realized he'd outgrow that really quickly but it would be perfect for an ice fishing tackle box. Fits a handful of small plastic boxes and there's a pouch in the front that's big enough to hold a pair of pliers, a multi-tool and a few spools of line. It's small enough to fit in a 5 gallon bucket and has a strap if you'd rather sling it over your shoulder.

Link to comment
Share on other sites

If I am travelng light I just put a medium size zip lock bag with a two small jars (like a drug presciption container). One filled with jigs and other filled with hooks, beads and sinkers.

If I am traveling heavey I carry two small clear Plano boxes (Plano Stow Way). Be sure to wrap a solid rubber binder around each box...you don't want to drop your stuff all over the ice!

Link to comment
Share on other sites

I have one of the rose creek boxes for all of my panfish jigs, like my Diamond jigs and gill pills.

I then have a bunch of the small plano 34xx series boxes. I have a few of them I keep in a vexilar tackle tote. I have a bit more tackle than that and end up having a few loose ones rattling around my bucket. I try to group them by size/species so I only need to take what I need.

The nice thing about the boxes this size (I used to have a couple plano 3600 boxes) is that these fit in your pockets and don't have such a huge profile in your bucket. The 3600 boxes would stick up too far in my bucket so I couldn't fit my flasher in there when I needed to.

I know a couple of guys who are running soft sided tackle boxes too, but I like to be able to keep it all in a bucket, or in my pocket, as it makes it a lot easier to run and gun or fit your stuff in your buddies house when you team up.

Also, I use one of those plano bucket lids. Those things are handy (when you dont have to sit on your bucket) as you can fit a ton of loose tackle in there. I keep a variety of stuff in there and most of the time have no need to get into my bucket.

Link to comment
Share on other sites

How does everyone tend to their plastics?

A small CD binder with the plastic sleeves works pretty well for plastics.

I'm a bit overly cautious on storing my tackle. For long term storage I have all my spoons and larger jigs stored in flambeau z rust organizers. Smaller jigs are in fly boxes. Usually almost everything stays at home to keep my collection from getting rattled around too much out on the ice.

For each trip I select and pack the tackle in small waterproof boxes that are foam lined. The hooks are stuck into the foam, keeping the tackle that I do bring out on the ice from banging around too much. I usually take a good assortment of proven lures and a small variety to try if those fail. If I'm going someplace that I'm unsure of the tactics and desired presentation, I'll certainly bring more tackle along, but usually a few small cases about the size of a cigarette pack suffice.

I carry my tackle, flasher and beer in a cabelas backpack designed for tackle. I like knowing that those three things will be intact when I get to the spot.

Link to comment
Share on other sites

brad hit the spot with his pic. Down size all your stuff. When you only use a few jigs threw the season how any do you really need to carry with you. I went threw all the stuff that I had, boy was it a lot. If I had not used it in 2 years it went on hsolist. I got it really thined out then put all my jigs and spoons in rose creek jig boxes and found one of the smallest tackle bags i could and away we go.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.