Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

advice on new shack and auger


Al.Wichman

Recommended Posts

The boss (wife) finally agreed to let me upgrade my equipment this year. I am going to be looking for a flip style shanty and auger I need the shanty to be comfortable seat wise and in heat retention because my 13yo daughter wants to start coming. I have been using my brothers Frabill Trekker the last two years and am unimpressed the material seems thin and the poles are very stiff to work with. I should mention my budget is a thousand dollars.

Link to comment
Share on other sites

You'll get a thousand different answers on this one. I would say an Otter Lodge and a Strikemaster Lazer Mag auger. You should be right on budget with those two. The poles on the Otter can be difficult to work with but they are squared tubing for extra strength. The insulated houses are nice but I've never had an issue with heat when running a big buddy or sunflower heater in my otter.

Link to comment
Share on other sites

Pretty solid advice from toughguy. I personally have an Eskimo shelter but have heard nothing but good things about the Otter units. A bit more spendy but again, nothing but praises. One thing I will say about my Eskimo is that compared to several other flip over shacks I've been around and used the poles extend and retract very easily. The fabric though, seems thinner than some of the competition ,although I have never been cold using a standard Mr. heater sunflower style. Buying again, I would like a longer look at the Otter.

For whatever it is worth I purchased a Lazer Mag last year and couldn't be happier. I just fired it up in the garage Saturday afternoon. Always runs like a champ and cuts like a samurai.

Good luck!

Link to comment
Share on other sites

The Otter units are solid!!!! You'd be hard pressed to find a better shelter for the money. As far as augers go, I'd recommend a Strikemaster. The new Solo engines are insanely fast and lightweight!! Either way, shop around and find what you want. You have a budget so use every last penny wink

Link to comment
Share on other sites

If you think your daughter is going to really get into it, take a look at a Clam Denali. I got one last year because my son always goes with me. It is really nice for each person to have their own fishing area, however if you go by yourself alot, it is a little tougher to set up and take down by yourself.

Link to comment
Share on other sites

The auger purchase would be easy for me, defiantly a Strikemaster Lazer Mag. The house would be a wait and see whats new this fall. I ran a Otter for 13 or 14 years which was great and then this last spring bought a Canvas Craft insulated flip style which seems to very nice and uses all the Otter components but this setup wouldn't leave any cash for an auger.

I heard Clam is make changes to there canvas and sleds so it will be fun to see whats new this fall. I wouldn't set my mind on any one brand until all the models hit the floor and hopefully we will see some more choices for insulated portables.

Link to comment
Share on other sites

I really love my Frabill Refuge, even though its not a flip over shack. I have a SM Strike Lite and I love that as well. It has a Lazer bit on it instead of the plastic and it screams through the ice.

Link to comment
Share on other sites

You'll get a thousand different answers on this one. I would say an Otter Lodge and a Strikemaster Lazer Mag auger. You should be right on budget with those two. The poles on the Otter can be difficult to work with but they are squared tubing for extra strength. The insulated houses are nice but I've never had an issue with heat when running a big buddy or sunflower heater in my otter.

The new Otter poles are very easy to use. I havent had a issue with any of my Otter poles since they went to the new pole design. I also would say a Otter Cabin or Lodge. You wont get both a Otter and Strikemaster for $1000 though.

Link to comment
Share on other sites

The Trekker is just as much shack for the money an Otter is, half the shack for half the money. Give your brother $150 for the Trekker and buy a used auger. You will have $600 left over to buy your daughter anything else she might need. Everyone loves to pull a fast one on their boss.

Link to comment
Share on other sites

The new Frabill sleds are as good as the Otter sleds, plus Frabill makes an insulated shelter called the R2 tech, great sled, great seats, insulated shelter, all for like 700 bucks. Add an 8 in lazer mag and your just over a grand. Oh yah, i'm a big Strikemaster fan, so as for the auger, Lazer Mag all the way, there is only one auger out there that can come close to the Lazer.

Link to comment
Share on other sites

I bought a new Otter 3-man and new Strikemaster Lazer Mag last season for less than $700. Got the Otter at H&H in Maple Lake for $350 with hyfax and cover. It's a Wild 3 sled, but has individual seats instead of the bench. Found the auger on C-list for $275. Brand new, never started, hung on the guy's wall for a few years.(Note: I wish I had a wife that bought me an ice auger for Christmas) It isn't a Solo, but it definitely gets the job done.

Keep looking for deals and you'll find them.

Link to comment
Share on other sites

This is my .02 cents worth. Wait till the Annual St. Paul Ice Fishing & Winter Sports Show. You will be able to get a lot more for your money plus they have great deals. That is where I picked up my portable for a great price. You will have all the dealers out there so you can compare them to each other.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.