Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Glove for ice fishing


mnfisher22

Recommended Posts

All I have ever used is just cheap brown jersey gloves and if they get wet put on a dry pair. But I have never had problems with my hands getting cold.

I hear the arctic armor ones are excellent.

Lynn J.

Link to comment
Share on other sites

Guess what I like to use are the fingertip-less rag wool gloves with the flip over mitten while I'm fishing. This is obviously for outside hole hopping.

Rebaiting, adjusting knot position, unhooking fish, etc all require a little dexterity and thats why I like no fingertips on the gloves. If the fingers get cold, I just flip the mitten over.

These are pretty cheap as well so having a few pairs handy is pretty easy.

For all other ice fishing uses- setting up shacks, augering holes, digging out the truck, banking the house, snowmobiling, etc, I'll use my Arctic Armor gloves.

Link to comment
Share on other sites

I've tried many different kinds of gloves and just end up taking them off once im fishing. I just use the fingerless pullover mittens to get my stuff set up but after that I just have some sort of hand warmer in my hoodie pouch.

Link to comment
Share on other sites

I have the ice armor gloves and i dont think they are worth the 30 bucks... they are waterproof and my hands dont get wet but the problem is if your hand gets wet the outside of the glove freezes which means you now have unflexible fingers. other than that i think it is a good glove just arent what i thought they were going to be like!

Ryan

Link to comment
Share on other sites

Just your basic tan, sherling? lined deer hide/leather choppers is all you need. I've had the same pair for several years and they're still warm. Easy to whip off too when your jigging outside or tip up fishing.

Link to comment
Share on other sites

I will wear anywhere between 0 and 4 or 5 pairs of gloves each time I am out ice fishing, depending on the temp, wind, and what i am doing. I usually have with me a pair of the insulated gloves that the palms and fingers are dipped in rubber, a thinner pair of lined leather gloves, an thicker pair of insulated gloves, and if it gets really cold the big choppers come out. Somehow i always end up with a pair of the yellow farm gloves left in my pocket too, which i will also wear on occasion. i like to wear the dipped gloves if i am catching fish and don't want to take the gloves off to take the fish off. The others depending on if i am setting up the house, drilling holes, and how cold my hands are decides what i am wearing. I am pretty much just working with what i have and not buying any new gloves.

Link to comment
Share on other sites

I just bought a pair of the L_ndy ones for when I am handling the bigger fish. Otherwise I use the wool mitten/glove combos mentioned above, they work well when using small tackle, especially for pannies. You can put on a waxie or tie a knot, then just flip the mitten part back over, pretty slick and cheap.

Good Luck!

CJH

Link to comment
Share on other sites

I usually have a pair of uninsulated leather gloves on while in the fish house. I have to keep something on my hands because if they get cold, or cold/wet they will itch like you wouldn't believe for an hour. The benefit to wearing gloves is that I have lost far fewer fish at the hole since I am able to lip grab walleyes and northerns without fear of losing a finger.

If it is real cold I have several pairs of insulated Gore-Tex gloves from Cabelas.

Link to comment
Share on other sites

Wow, I'm all over the board here.

Usually, I'm with Borch. I don't want to wear gloves if I don't have to. It has to either be pretty cold or pretty windy before I slip on some gloves, and if the action is hot I don't notice it anyways smile.gif

When I do wear gloves, I do like the wool mitt flip-over fingerless gloves. I've used neoprene and high end Ice Armor gloves but I generally manage to either get cold finger or the gloves get slime or water that freezes on them.

When it's not below freezing and I'm open water fishing early or late in the year I'm a fan of the specialty leather work gloves. They are like the gloves the kids wear in motorcross racing. Tight fit, keeps the fingers warm and out of the elements yet provides lots of dexterity. Not the best if they are always getting wet though.

Another glove application is trout and salmon fishing. Handling these fish is a horse of a different color. Especially when the water is warm and these fish are full of spawning energy, they have the devil's energy and are like trying to catch a greased pig. A "grippy" dotted or mesh glove is a must. I've found my fillet gloves work pretty well. I'm planning on giving those another run come April.

Link to comment
Share on other sites

On and off the lake I will wear choppers or some insulated finger gloves but while I am fishing I will never wear gloves. If it is cold out and I don't have my Otter I will jig fish over a pail with a lantern or a heater in it but most times I am in my Otter with no gloves because if the bite is lite or they come from under your bait so there is no weight you will never detect it with gloves on.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.