tyrone01 Posted June 19, 2007 Share Posted June 19, 2007 I am looking at purchasing some wave wackers for my lund 1660. Does anybody have any info on what brand to look at? Link to comment Share on other sites More sharing options...
0 Tim Ellis Posted June 19, 2007 Share Posted June 19, 2007 ( Niote from Admin, please read forum policy before posting again,Thank-you.) Link to comment Share on other sites More sharing options...
0 Mille Lacs Guy Posted June 19, 2007 Share Posted June 19, 2007 I would suggest the wave wackers brand. They are the best I have had and I have used or looked at all of them. You can do a google search of wave wackers and get the information you need to contact them. Link to comment Share on other sites More sharing options...
0 harvey lee Posted June 19, 2007 Share Posted June 19, 2007 You might do a search for White caps as I put a set on from them and they fit very nice. Link to comment Share on other sites More sharing options...
0 PierBridge Posted June 19, 2007 Share Posted June 19, 2007 Both great products...I prefer Whitecap splash guards myself great service and good people to deal with. Link to comment Share on other sites More sharing options...
0 insurance guy Posted June 19, 2007 Share Posted June 19, 2007 I'm a backtrolling maniac and have Whitecaps on my Lund Pro Angler which have served me very, very well. They make it easy to figure out which ones you need and are very easy to install yourself in an hour or two. I'm sure the Wave whackers are good products also but I have no reason to change. Link to comment Share on other sites More sharing options...
0 Chris Haley Posted June 19, 2007 Share Posted June 19, 2007 I'm another Whitecap guy!!! At half the price you have to check them out!! Link to comment Share on other sites More sharing options...
0 Da Beak Posted June 19, 2007 Share Posted June 19, 2007 Not to go too far off of the subject, but do the Whitecaps or Wave Wackers interfere with putting on the boats storage or travel cover? I have an 1850 FishHawk, and would like to put them on also.Thanks Link to comment Share on other sites More sharing options...
0 harvey lee Posted June 19, 2007 Share Posted June 19, 2007 I have a LUND Classic 1660 and all I did was to move the back two snaps on the back of the boat an inch or so and it works fine. This is with the White Caps brand. Link to comment Share on other sites More sharing options...
0 Duffman Posted June 19, 2007 Share Posted June 19, 2007 My cover does not fit with the White Caps on, but it only takes a minute at most to unscrew four wingnuts and take off the splash guards. Link to comment Share on other sites More sharing options...
0 kunk Posted June 19, 2007 Share Posted June 19, 2007 I have Wave Wackers and also have to take them off. A little inconvenient, but better that buying a custom cover. It only takes 2-3 minutes. Link to comment Share on other sites More sharing options...
0 LMITOUT Posted June 19, 2007 Share Posted June 19, 2007 Wave Wackers on my boat but never had the White Caps so I can't give you an opinion one way or another, but I have no complaints about the WW's. Seem to be built pretty well. Link to comment Share on other sites More sharing options...
0 caseymcq Posted June 20, 2007 Share Posted June 20, 2007 I have Wave Wackers on my boat. I got them with the boat when I bought it. The dealer told me that they go on better than anyother brand so that is all they use. I personally think they just use WW's so they can charge through the nose. Even with that being said I really like my WW's. They have an extremely nice mounting system. They come off with a couple of thumb screws. My SWAG (Scientific Wild *** Guess) is that either brand is probably a good choice. Six one way, half a dozen the other. Link to comment Share on other sites More sharing options...
0 iffwalleyes Posted June 20, 2007 Share Posted June 20, 2007 White caps are very easy to install as long as you have a little know how and a tape measure . I don't have any on my boat right know but I have had white caps in the past. Link to comment Share on other sites More sharing options...
Question
tyrone01
I am looking at purchasing some wave wackers for my lund 1660. Does anybody have any info on what brand to look at?
Link to comment
Share on other sites
13 answers to this question
Recommended Posts