Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Remind me again how great pig and jigs are...am I missing something here


RandyFish

Recommended Posts

As I keep trying to master the pig and jig, from what I have seen....They just do not produce like the alternatives.

I have caught a couple of fish, but ...

I have caught several fish on a texas-rigged worm ...mid morning, clear sky, shallow inside weedlines...nothing on the P&G.

Same deal on carolina rigs with brush hog vs P&G pulling ofF mid-depth weedlines.

The topper came as my buddy caught three nice fish in the pads at sunset around pads and dock using a weightless plastics, and I got nil hopping my jig through the pads, or from casting underneath docks and letting it sit before hopping it back.

I have really been forcing myslef to use the P&J, but at this point, I am either missing something technique wise or the P&J just does not perform across the board from a general purpose standpoint like a Texas Rig does or as dock/pad lure like a weighless fluke or Senko.

I have tried diffrent weights of jigs and colors, mostly black/blue and tan/green.

I know alot of FMers love them, calling them the most versatile bass lure around, but man, I am beginning to think I am wasting my time.

Maybe I should just use the jig as an option when the other ones do not work, because I just can not see them as a go to option...which a Texas rig is for me now.

We all only have so much time on the water.

Suggestions or comments.

Link to comment
Share on other sites

I say stick with it. Normally, the best flippin or jig/pig bite is yet to come. Once the fish get out of the post spawn mode and into summer patterns the jig should get better. I'll bet a paycheck that 5 jig/pig fish will outweigh 5 spinnerbait or worm or topwater or whatever fish 90% of the time. Get it into the strikezone and leave it there. We work too hard to get under that dock, tree, etc. to simply reel it back in right away! Bass typically aren't tucked under docks, or wood because they are in an agressive mood.

Link to comment
Share on other sites

I am with you. I am a pretty good bass fisherman and have a lot of effective techniques, but the jig and pig is not one of them! Shallow water, weeds, deep water, I am ineffective in all of them with a jig and pig. I am going to try and figure it out this summer, but usually I just get frustrated and go back to other productive techniques.

Link to comment
Share on other sites

I wasnt to fond of them either, until last year. I like fishing docks and shallow cover mostly and since learning to fish jigs Ive got several real nice bass on them. I still mainly fish plastics around docks and other shallow cover. I use the jig when I get to trees that hang low over the water and cover a lot of the surface, and under docks that have big platforms. I think most people just make several casts around the dock and move on. I like to skip the jig way up under to these larger docks and shake it tempting those bigger fish. I think the bigger fish are more willing to take the jig infront of them while the smaller fish are the ones who will shoot out and grab baits fished around the edges of docks.

Link to comment
Share on other sites

Well you have 2 choices you can either stick to it like others say and you will eventually see that it is a go to lure or you can not use it all together and use what you know works for you. Everyone has confidence baits that they throw and will always throw no matter what. However I have found that a pig and jig is a great lure for many situations, if you choose to stick with it you wont be disappointed.

~Matt Jung

Link to comment
Share on other sites

If I had to choose only one lure out of my arsenal of tackle to fish a tournament,it would deffinatly be the "jig 'n pig".This is not a bait you can learn to fish overnight.It's take a while to sense and get the feel.Don't just throw it out there 'n reel back in.Cast to a target and let set down,give it a twitch or two and reel in the slack and do this all the way through the strike zone. Sometimes I hop 'n reel and let it just sit there & then shake my rod tip a little.Alot of the time thats all it takes to entice the bass to strike.Just remember,this is not a fast moving bait presentation.

A trick I also use is to cut off a piece of plastic worm about an 1 1/2" and thread onto the jig hook first before I put on the pork,that way the pork doesn't roll on the hook and accidently cover up the hook point.

Good Luck and be patient,it'll definatly pay off!! ><>

Link to comment
Share on other sites

I don't have a lot of confidence in the "jig n pig" either because I'm not sure what size jig (i.e 1/4, 3/8,1/2 oz.) to match with conditions and color.

I bought some Outkast Swim Jigs just recently and thread a Yamamoto Super grub on it. Have yet to catch anything with it and not really sure how to fish this jig.

I do also have some other jigs as well but just haven't gotten the job done while fishing em'.

confused.gif More tips, help would be appreciated! confused.gif

I'm pretty confident with senko's around docks and spinnerbaits for other conditions. Just wish those darn senko's weren't $6.99 for 10!

Link to comment
Share on other sites

I am too learning to fish the jig. I've had some success with it. I like it for pitching under docks and for areas that aren't as clogged with weeds. I would rather fish a tube in the real thick stuff, IMO I think it goes through the cover much easier. I like the jig for the deep weed lines and in the pads as well.

I definatley have noticed that it does produce better quality fish, not all times, but a majority of the time.

Don't forget to swim it either! That can be a killer presentation on days when you would throw a spinnerbait, but the fish are shying away from the flash of the blades.

Good luck and Keep trying, it will add another weapon in your arsenal!

Link to comment
Share on other sites

i don't use the original senkos.( to exspensive for me) i have ben using the chompers brand with good results( a little cheaper, but very soft that after one or two fish they are shot.) lately i have been using the strike king triple X . been doing well with these and man are they durable!! yes there will be times and places that other lures/ plastics will out preform a jig and pig/plastic. but man do they work often enough to always have as a second choice.the ways of fishing one are only limmitted to ones' imagination. it can be hopped, bounced,dragged,swam, or ????. color combinations can be critical, but i will leave that open to the guys that are more informed than me. i mainly stay with black/blue ; a green/ oil color , and some times a white.as for the where. docks,break lines, trees; and ?? just as you have read and gets mentioned alot; keep an open mind and don't be afraid to experiment. keep using it. it may never be your go to lure, but it sure is one that you always want handy. grin.gif

Link to comment
Share on other sites

Jigs are hardly my favorite lure of choice. Ha Ha. This past sat fishing a tourny, I had three rods rigged. One had a 3/8 ounce black and blue with a black and blue power craw. Next one a 3/8 ounce green pumpkin with a pumpkin zoom trailer. The third a 1/4 ounce green pumpkin with a green pumpkin zoom trailer. All day I rotated jigs and caught fish on all of them. They preferred the lighter colors but all caught fish. I will throw these all summer long. Oh and they will catch some piggies. 5.35lb is a good kicker! Flip cool.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.