Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

baitcasting reel for bass


lunker651

Recommended Posts

I've been fishing bass with spinning reel for a long time and wanting to change to bait casting reel. People say baitcasting reels are great for bass and also the prefer reels for bass. What are the advantage and disadvantage for baitcasting reel? What brands and models you prefer and Why?

Link to comment
Share on other sites

Pros:

Better accuracy for casting.

Little or no line twist.

Seems like more power to control a fish.

Less fatigue for all day casting.

Faster casting.

Cons:

Backlashes

Backlashes

Backlashes

Can't cast light baits as well.

A decent one will cost around $100.

Bachlashes can be minimized with practice, experience, using the right rod for what you are throwing and setting up your reel properly.

I have Shimano Curado's ($120) and think they're great. They're rugged and dependable and they work real good. There's a reason they are the top dog among bass professionals.

Folks will also recommend Pflueger ($100) baitcasters too. Many pro's are using these too.

Daiwa and others make good ones too. It just seems like you have to spend $100 or more to get a good one.

Bottom line: Spend the money and get a good one and practice, practice, practice. If you get a cheap one it won't work very good and you'll end up giving up on baitcasters or spending $100+ on a good one.

Link to comment
Share on other sites

I'd recommend the Flueger Purist. They sell for about $80 and from what I could tell its the same thing as the Trion ($100) but a little bit smaller. They are both smooth as can be, but I picked the Purist because of the value. I couldn't find another baitcaster for under $100 that was any good. Its that Purist or spend 100-130 for a baitcastor, otherwise it won't be worth it. The crappy ones are just too hard to cast.

Link to comment
Share on other sites

I just recently picked up a Pflueger Trion low left handed (first baitcaster) I got it in left handed because standard baitcasters reel on the right side, I am used to reeling on the left side of a reel and it was the same price as a right handed reel. consider that before you buy one. also that thing whips my bait as far as I can make it with my amount of experience, but I do have to work on accuracy still. I made the switch and I'm happy so far, I think you'll be happy as well.

Link to comment
Share on other sites

As stated do not switch.. however, do get a few and give them a shot.. Baitcasters have more power, they dont twist line, they hold heavier line and allow for more accurate casting.

The only disadvantages are backlashes. With the right set up you can cast quite light lures. I often cast weightless plastics with a bait caster and can outcast many friends with spinning for distance with the same exact lure.

The only other minimal disadvantage is arm fatigue. Because the reel is on top of the rod and all the weight is then on top of the rod, there is a slight ammount of forearm fatigue that you do not have with a spinning reel. A baitcasting rod will also stress differently because of the same reason.

I have more baitcasters than I do spinning. Yet I have quite a few spinning outfits as well.

Link to comment
Share on other sites

I received the Shimano Callisto as a gift and decided to keep it and try it out. It's cheap ($40) but actually works pretty well. I can't say how long it will hold up, but I think it's a pretty nice reel for the price. You give up the centrifugal backlash control for magnetic cast control, but I haven't had any backlash problems. I know they make a few others with a few more bearings that are in the $50-$70 range. They might be worth checking out.

Link to comment
Share on other sites

I fish the flueger purist cheapest smoothest reel out there in my opinion i have 2 and would like a third.I also have shimano bantam but i cant go past 12 lb line without problems but i have never tried braided on them and i think i paid 40$ but i would still go with the purist for 80$

TRY hsolist THEY GOT THE CHEAP STUFF!!!!

Link to comment
Share on other sites

Gander Mountain makes an aluminum body Guide Series baitcaster for about $60 I think. I picked one up and it is very nice. Not as smooth as my Curado but for the money I am impressed.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.