Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Which type of grass seed?


LunkerLover84

Recommended Posts

So i'm planning on overseeding my lawn at the end of august and i'm just wondering which type of seed to plant. I'm debating on whether to lay just KBG or just turf style tall fescue. Or a mix of the two. My lawn is currently a mixture of grasses which is starting to give it a patchy look. Any thoughts??

Link to comment
Share on other sites

You might find these sources of information helpful....

You pay for them, might as well use them

http://www.extension.umn.edu/garden/yard-garden/lawns/lawn-renovation/

http://www.extension.umn.edu/garden/turfgrass/repair/

http://www.extension.umn.edu/garden/turfgrass/

There is a lot of other info on the extension page. 

Link to comment
Share on other sites

Depends on what your looking for. KBG is what all sod is made of so if you like that manicured type lawn go with that just be ready to fertilize, water and mow at 3" +. If your not to into taking care of it fescue will do the trick also perennial rye grass seems to be popular lately. Just be prepared for that lighter green grass and some rough spots with the fescue as it tends to grow in bunches.  Most commercial seed products have a mixture which makes the grass look kinda ugly. I would go to the local feed mill and get all one type and go with that. When you mix them one species always wins out and it never seems to be the one you want.

Link to comment
Share on other sites

I've used about every kind there is over the past 25 years, including a lot of "mix my own" blends, and the best all around one that I really like, far better than some of the big name brands seed, is Schultz's Hardy Lawn mixture, available at that big M box store. Gives me a thick, dark lawn that emerges fast, and tolerates the heat and cold well. I overseed with it mixed into my Turfbuilder in Fall and Spring. I'd wait until mid-September, however. Just my opinion.  Schultz Hardy Lawn Mixture is as follows:

Seed Variety: 40% Perennial Ryegrass Blended, 25% Kentucky Bluegrass, 20% Panterra Italian Ryegrass, 15% Chewings Fescue.

 

jr65bo.jpg

2hn5cfp.jpg

 

 

Edited by RebelSS
Link to comment
Share on other sites

Thanks for the advice guys! I think i'm going to go with an all KGB blend they sell at C and S Supple in Mankato. The last house i owned had a lawn with mixed grasses and like Moose said, one species would stand out over the other creating a patchy look. The house i just purchased has the same problem. KGB spreads fast so within a couple seasons of overseeding it should dominate the entire lawn i hope.

Link to comment
Share on other sites

Bluegrass will do well if it is a sunny lawn. Mixtures of grass like 70% kbg 30% perennial rye grass is also good to use being if one grass is struggling due to weather, the other can kind of take over until the previous bounces back.

Link to comment
Share on other sites

I've used about every kind there is over the past 25 years, including a lot of "mix my own" blends, and the best all around one that I really like, far better than some of the big name brands seed, is Schultz's Hardy Lawn mixture, available at that big M box store. Gives me a thick, dark lawn that emerges fast, and tolerates the heat and cold well. I overseed with it mixed into my Turfbuilder in Fall and Spring. I'd wait until mid-September, however. Just my opinion.  Schultz Hardy Lawn Mixture is as follows:

Seed Variety: 40% Perennial Ryegrass Blended, 25% Kentucky Bluegrass, 20% Panterra Italian Ryegrass, 15% Chewings Fescue.

 

jr65bo.jpg

2hn5cfp.jpg

 

 

I bought some of this grass seed tonite. also bought the 22-0-10 winter/ffertilizer. about 3 weeks go I used one of them hook up to the hose weed quack/crab grass killer. man do I have a lot. question, put the fertilizer down then plant the grass seed? I will assume the dead tuff will be gone by spring and I do have SPOTS I want to fill in. or would I be best to wait for spring to put the grass seed down?????? 

Link to comment
Share on other sites

Spray for your weeds now. In about a week ( I like the weeds dead so they can be raked out) you can mix your seed and fertilizer together and drop spread it. It you aren't sure of how much to mix (ie; enough seed , etc) sow your grass seed, then fertilize right after it. I do this right before a 1-2 day predicted rain, I just did it today. Supposed rain tomorrow and the next day. If you have dead spots, grab a big bag of sterilized soil (so you don't get more weeds) rake out the dead grass, seed it, then cover lightly with the soil. Do the spots like this first, then overseed, fertilize, and wait for that rain. Fall is a great time for the weed-killing and seeding. And of course, you need Fall food to help that turf through the winter and a good green-up in the Spring. The benefit to doing it now, is getting it down and worked in before you have to rake all those leaves up.

Edited by RebelSS
Link to comment
Share on other sites

My thoughts as one who is more in tune with cool season forage grasses than lawn seeding: If you catch enough snow cover you might be just fine. No guarantees though. If it's an open winter and gets extremely cold for a spell all bets could be off. Had the same thing the year we did our addition. I seeded it, mulched it with straw about November 1st and it froze up. Sweet I thought, then it warmed up again so the grass sprouted. Luckily the straw protected it and the small amount of snow we got that winter protected it. It's still the nicest grass in the lawn after 8 years.

Link to comment
Share on other sites

I planted grass seed a while back with the idea it would freeze and not grow. guess what............come home from deer hunting yesterday..........I got new grass coming up. will it survive????????

It sure will! Check it out in the Spring! I've also got some new coming up from some overseeding a few weeks back. :/

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.