Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

I shoot an 870 and have my favorite load dialed in for ducks (3" #2 Kent Fasteel). Being new to early goose season, I am still searching for a goose load. What is your favorite load for early season geese? What size shot?

How about the Black cloud snow goose load?

Link to comment
Share on other sites

I prefer Federal speed shock 3" #2's at 1400 fps. In the early season this load works great and sometimes even switch to #3's depending on how well the geese are finishing. The little slower loads seem to pattern much better for me as well.

Link to comment
Share on other sites

3 inch No. 2s from Aug. early season until the water freezes. I use this on giant Canadas to buzzing teal, and everything in between.

I hate putzing around with switching out loads if another type of duck or a flock of geese comes in. By and large, this load seems to be the Swiss army knife of shot shells.

Link to comment
Share on other sites

3 inch No. 2s from Aug. early season until the water freezes. I use this on giant Canadas to buzzing teal, and everything in between.

I hate putzing around with switching out loads if another type of duck or a flock of geese comes in. By and large, this load seems to be the Swiss army knife of shot shells.

I've toyed with the idea of loading up a 2nd gun. One for geese, one for ducks. Suppose that is one more option.

Link to comment
Share on other sites

I've toyed with the idea of loading up a 2nd gun. One for geese, one for ducks. Suppose that is one more option.

Not a bad idea if you have the space. But when you're a plodder like I am, dragging out a gun, shell bag, decoys, spinner, dog platform, calls, while in waders and all your 40 pounds of clothing is plenty -- add a gun to the equation and I'm liable to never to leave the slough.

That said, I like an all-around shotgun shell for my hunting, and 3-inch No. 2s are the way to go. Cheap, effective, deadly to the range I need them (decoying birds...well within 50 yards).

Link to comment
Share on other sites

I've seen geese get hit pegged with 2s, feathers explode off their chest, and not even miss a wing beat. that's not sky busting either, well within range.

I use BB for geese. usually red box federals, support the local ammo maker. B-clouds jam in my gun more often than not. Nothing worse than pulling the trigger on shot two and nothing happens.

I also use 3.5 inch shells, cuz I can. Sure I hear stuff like 3 inch shells and 2 3/4 get the job done, but why not? Nothing wrong with putting more steel downrange.

Link to comment
Share on other sites

I believe if you're gonna hit'em, hit'em hard with big payload or alot of speed!

Fiochi has a 3.5" shell that has 1 9/16oz. @ 1450fps in 1, 2, BB, BBB

I want to get the 2's for decoy shooting as there would be alot of pellets hitting them where the corn goes in! 2c

Link to comment
Share on other sites

I've seen geese get hit pegged with 2s, feathers explode off their chest, and not even miss a wing beat. that's not sky busting either, well within range.

I've seen that with 3 1/2 inch BBs, too -- poor shot placement will do that wink

Link to comment
Share on other sites

I've seen geese get hit pegged with 2s, feathers explode off their chest, and not even miss a wing beat. that's not sky busting either, well within range.

I have also seen this happen on Mallards looks like a pillow exploded and they still fly off. I have also seen a goose get hit 7 times with BB and BBB. First pass 4 shots then it turned around and got hit 3 more times and then fly about 300 yrds upstream and then fold up. Upon cleaning it was hit everywhere from bill to tail featers and it ddin't want to stop flying.

Sometimes they are tough as nails and I dont want them flying off so I like the bigger shot.

I use BB early season then step up to BBB later in the season these pattern very well out of my browning and my stoger.

T's pattern better out of my 870 but I rarely use that any more.

Link to comment
Share on other sites

I've seen that with 3 1/2 inch BBs, too -- poor shot placement will do that wink

Not much I can do about poor shot placement other than put the bead on them better next time. I'd rather miss than pepper a bird and watch it fly away, only to presumably die later.

With perfect shot placement, I suppose I only need a single pellet of 7 1/2 shot right through the brain grin

Link to comment
Share on other sites

Personally I like Winchester supreme 3.5" bbb. Mainly because I have a bunch and they pattern well. Could definitely see a clear advantage of shooting smaller shot especially in a tight choke as a bunch of 2's to the head will certainly do in the toughest goose. If I still shot a patternmaster I would give 2's a try.

One thing I learned last year is the cheap 6 shot steel that I use to swat cripple ducks works equally well on cripple geese 30 yards and under in the field.

Link to comment
Share on other sites

The one "Golden BB" will do it every time! I shot a Canada goose last December that was 55 yards up with one BB that hit the wing bone and the fall killed it for sure as the skin got pulled off its chest from hitting the ground so hard and after cleaning it the breast bone was totally fractured! It also had 2 different size pellets in the skin. 1 #4 lead shot, and 1 T shot! I knocked it down with Black Cloud Snowgoose BB load!

Link to comment
Share on other sites

I have knocked over geese with #2's for years. Heck I have knocked them over with #6. My favorite load nowadays is 3.5 #3 shot made by Kent cartridge. Speed kills for me. if it doesnt say 1550 or above it doesnt fly outta the nelli.

Link to comment
Share on other sites

Any of you guys done a pattern test? @ 40 yards and a some paper. I just upgraded my 1100 to a benelli, (still have my 20 gauge 1100 for doves though). so I need to find the right shot/choke for early geese.

Link to comment
Share on other sites

Any of you guys done a pattern test? @ 40 yards and a some paper. I just upgraded my 1100 to a benelli, (still have my 20 gauge 1100 for doves though). so I need to find the right shot/choke for early geese.

Start with the Mod Buntt2k. my 1100 shot rem nitro steel BB-BBB with the best pattern. at least thats what worked for that gun.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.