Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Warm Gloves???


IT Guy

Recommended Posts

I like to buy the ragg wool convertible mittens with Thinsulate. The mittens keep my hands plenty warm and you can pull the mitten part back to use your fingers for tying jigs, etc. The wool is key in the warmth factor. Even if the wool gets wet it retains heat. I have three or four pairs that I purchased at $14.00 per pair. I keep them with me and if one pair gets extremely wet I will just switch pairs and dry them when I get home.

I have tried multiple gloves claiming to be waterproof and rarely are they truly waterproof.

Link to comment
Share on other sites

I've been very happy with Ice Armor gloves in both the finger and mitt styles. On the show Deadliest Catch the crews all wear a blue rubberized work golve. They seem to keep thier hands warm and have a high degree of dexterity. Does anyone know what brand those gloves are and where to get them?

Link to comment
Share on other sites

I had a pair of both styles of ice armor. They both worked great and lasted a couple of years. The one pair is going on its 3rd year now. My extreme ice armor gloves went for a ride on the roof of my car last year. I just picked up the neoprene 2 fingers ice armor gloves today for when im outside fishing.

Link to comment
Share on other sites

This will be the 3rd winter for my Ice Armor mits. They are slowly breaking down but have been one of the warmest I've used.

I tried the Ice Armor neoprene gloves and wish I would have saved the receipt to take them back. They make my hands feel colder than if I wasn't wearing any gloves at all.

The warmest mittens are the old fashion military chopper mits (the ones with the fake fur on the back of the hand). Hard to find now.

Link to comment
Share on other sites

Grandoe is a very nice glove. That is what I wear for skiing. However, when they get wet, my hands get cold. Great for skiing, not as great for fishing.

Just get a pair with gortex and you can put your hands right in the water and never feel the cold....

Ice armor gloves are warm, but they get their waterproof from a layer of plastic between the inner layer and the outer layer, so no breathability... but if you get the outer layer wet your inner layer stays dry. The only reason I know whats inside of ice armor gloves, because the two pair i'v owned have ripped open and fallen apart.

I know this about gloves.... You get what you pay for...... cheap gloves don't last and in most cases are not very warm. Good luck. The shopping and reaserch is worth the time.

Link to comment
Share on other sites

I wouldn't recomend Ice Armours either, have had 3 pair and none were neither dry or warm... I wear a pair the boss got us last year for drilling and pulling the shack, if I'm outside fishing I don't wear any, if my hands get cold I jump in the shack with the wife for awhile or just stay in the shack....

Link to comment
Share on other sites

  • we are 'the leading edge' HSO Creators

I have had a few pairs of Ice Armor Gloves. If you use these gloves for fishing and fishing related activities(house set up, drilling holes) they will last quite a few years. I had my last pair for 3. I was also using them to cut and stack wood and hunting.

Link to comment
Share on other sites

I've been very happy with Ice Armor gloves in both the finger and mitt styles. On the show Deadliest Catch the crews all wear a blue rubberized work golve. They seem to keep thier hands warm and have a high degree of dexterity. Does anyone know what brand those gloves are and where to get them?

The gloves the guys wear on the deadliest catch are Atlas Gloves, they have a number of different models, 460, 620, 660 etc are ones you see on the show. The SB460 "Snow Blower 460's" are great, they have a fleece lining and work great for well snow blowing, haven't used them for ice fishing. You can find them online from teh big "A" site.

Link to comment
Share on other sites

celsius (orange & black) neoprene waterproof, $20 for gloves & cap at FF

+1....they are great for ice fishing, ugly, but keep your hands dry and relatively warm. They have a thin profile and you can actually do thing without having to take the gloves off.

Link to comment
Share on other sites

Over the years, I have used about every glove out there including the Ice Armor gloves.

Hands down, the best out there are the Sno Suit mitts. They do also offer them in the finger type but the mitt type will be warmer. Not slamming Ice Armor at all but they do not hold a candle to the Sno Suit gloves.

I have worn these for 3 winters and they still look like new. I was on rainy Lake ice fishing a few years back and the 4 days we were there it was approx -38 below. We were on the ice moving and cutting holes all day and my hands never once got wet or cold.

Now that is a glove.

Link to comment
Share on other sites

I checked out the Arctic Armor gloves and mitts and I think the mitts have a wierd lining in them. They feel like they have a load of corn kernals packed in the lining. Anyway, I see that gander has them on clearance for $16.99 and $19.99 if you want to try them out. Maybe look at waterproof snowmobile gloves. You want taped seams and a waterproof insert like Hipora to do the job.

Link to comment
Share on other sites

This will be the 3rd winter for my Ice Armor mits. They are slowly breaking down but have been one of the warmest I've used.

I tried the Ice Armor neoprene gloves and wish I would have saved the receipt to take them back. They make my hands feel colder than if I wasn't wearing any gloves at all.

The warmest mittens are the old fashion military chopper mits (the ones with the fake fur on the back of the hand). Hard to find now.

He's right, what i have done for ever is i have a nice pair of leather Deer Skin chopper mittens with fur inside.. Promise your hands will never get cold.. On top of the get a size bigger than normal and wear a pair of lite gloves (Baseball or Mechanic gloves)that quickly you can pull your mitten off to do what you want and still have the warmth! This is what i have found to be the best option..

Link to comment
Share on other sites

I bought those (Cabela's Pinnacle) two seasons ago, they suck and here is why. They look like a mitt style but are a glove inside of the mitt, result, cold fingers no matter what, it doesn't even have to be that cold, say +20. I don't fish where you can drive up to a spot so I spend at minimum a half hour on a sled and then setting up. I found some Gordini down filled and goretex that have been good as well as a pair of Grandoe, but the latter can get wet easily. I know some people are OK with gloves, but I have always stayed warmer with a mitt style, even the good old choppers if you can get a good liner.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.