Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Keeping Grubs Alive


Nordern

Recommended Posts

euros keep in fridge and try not to let them get to room temp even while fishing.......waxies just keep them in your jacket pocket and they seem to live longer that way.....at least for me when ever I try to take care of waxies they die if I just keep them in my pocket and go fishing 2 weeks later they seem to always still be alive!!

Link to comment
Share on other sites

Yup throw them in the fridge. I usually buy a 500ct the beginning of the season and it usualy lasts me the most of the season. occasionally you have to go through them and pull a couple dead ones out and replace the sawdust but the majority will be fine.

Link to comment
Share on other sites

Change the bedding often.

If your waxies wreak like ammonia the pannies will spit them out immediately.

I use corn meal. I store them cool for the reason they slow way down. Slow'um down and they need less fussing with.

When on the ice I keep them in my pocket to warm them and keep them from freezing.

Link to comment
Share on other sites

Will waxies keep better in my fridge or in my 60 degree basement? Got the spikes in the fridge, but didn't know about the waxies.

Knutty

60 Seems like it would be to warm. I would think the fridge would work better.

Sifty

Link to comment
Share on other sites

I did some looking and found this on a bait shops HSOforum.

Waxworms are the larvae of the Greater Wax Moth they are excellent for all species of pan fish and trout. Hold at 65 degrees for 2 to 3 weeks and then refrigerate. For best long term results transfer each cup to a container with more surface area. One or two cups can be put in a gallon ice cream pail with the lid left off. Remove any dead bait on a weekly basis. Use the original cup to take with you only what you need for the day. If you plan to use them within 4 weeks, refrigeration may do more harm than good. Once you refrigerate waxworms they should be kept refrigerated.

Sifty

Link to comment
Share on other sites

This is off my bait suppliers web site

.Two basic guidelines that will help keep your bait healthy:

1.Always make slow gradual temperature changes to the bait.

2.Always handle the bait gently and as little as possible.

Leeches(These bait care tips are recommended for larger quantities of bait, 1/2 pound or more. For smaller quantities leeches the only change to these instructions would be the container requirements, in this case they can be piled up less than 1" or not piled at all.)

Keep leeches refrigerated, 38-40 degrees is just fine. Nice cool fresh water really is the key for keeping leeches healthy. Never use chlorinated water (city water) on any type of live bait. Best choices of water are well water or chilled lake water. Just a tip if you plan on using water from a lake, pond, stream or river. The plastic gallon milk jugs work very well because they fit so nice in your refrigerator. After you collect the water bring it home and put it in the same refrigerator you are keeping your leeches. By the next morning the water will be chilled down to about the same temperature as your leeches so you can then change the water. We recommend that you change your leech water every day or at least ever other day for best leech health.

When choosing a container to store your leeches, choose a container that will keep the pile of leeches about 1" to 2" deep when in the water. Leeches like to be a little crowded but not too crowded so don't allow the leeches to be piled up more than about 2". The container should also hold atleast 4" to 8" of water above the leeches.

So to recap, change the water every day or every other day with well water or chilled down lake water. Keep the leeches in a container that holds enough water and does not over crowd the bait. As you are changing the water also pick out any sick or dead leeches and throw them away. Keep leeches refrigerated during storage and also keep them nice and cool when traveling and fishing.

Night Crawlers and AnglewormsNot only are night crawlers a good live bait but they are also pretty easy to take care of and keep. Just like leeches, store your crawlers in the refrigerator. Once again about 38-40 degrees is just fine for a temperature. It is important to check your crawlers every other day. As you look through your crawlers and while you re-bed the bait always try to avoid pulling and stretching out the bait, just be as gentle as possible. Be sure to remove and throw away any sick or dead crawlers. It is also a good idea to flip the container over every time you check the bait because it will force the crawlers to crawl back through the bedding. When the bedding gets soiled or wet it is time to change it with a good artificial bedding that has been chilled down to the same temperature as the crawlers. This could be as often as every 10-14 days or as seldom as once a month.

Keep the bait cool when you are traveling and fishing. When you get home from fishing do not put the crawlers you had fishing back into you bulk supply of crawlers. Keep that bait in a separate container and just add to it from your bulk supply when you go fishing again. When you are out fishing things can happen to your bait that may stress it out and weaken it so we don't want to mix that bait back into your bulk supply.

There are many other things fishermen will do to crawlers, some things will plump them up and others are intended to try and farm them. We are just making recommendations to help you keep the bait you buy healthy with the least amount of effort and time.

Wax WormsCheck and remove any dead every other day at a minimum. We recommend storing your waxies at about 43-49 degrees. When fishing try to keep them about the same temp and out of the direct sun light.

Maggots,Mealworms and MousiesVery easy to keep. Refrigerate at about 33-35 degrees. In general this might be a little cooler than most people keep their home refrigerator so you may want to use another refrigerator that you can dial down a little colder. Check the bait every two to three days, pick out and throw away any dead.

Fresh Water ShrimpCool fresh well water, cooled down lake water, pond water and or river or stream water will all work just fine. Do not use chlorinated water (city water). Check your bait every 3-4 days and remove any dead and change water at that time.

Link to comment
Share on other sites

Keep waxies at about 50-55 degrees. Do not keep in an enclosed (non ventilated) package, as moisture will kill them. If you have a tub, or greater quantities, use a small rubbermaid container. Just toss the sawdust and waxies in, drill a bunch of small holes in the top for ventilation, and set it on. Take out waxies as needed. Do not feed them!!!!!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.