Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Deer Cart


analyzer

Recommended Posts

We're hunting public land this year, and will be as much as a 1 1/2 - 2 miles from the vehicle. Have any of you ever constructed a deer cart from bicycle tires, or similar, and how did that work out for you?

If any of you have been successful with such a thing, would you mind sharing a pic or two?

I'm not talking about pulling it behind an ATV. I was thinking more of something I can pull by hand. We can't drive in where we're at, no vehicles/ATV's allowed.

Link to comment
Share on other sites

They can be a life saver if there are decent trails. I have an ameristep version and used it this year for the first time to pull out a doe. It wasn't a long drag, maybe 300 yards but it was up hill about half the way and I must say it was nice, a one hand "drag" the whole way.

Link to comment
Share on other sites

Made one a few years ago and works well. Need 2 people. Looks like a ladder with a v shaped bed for the deer to lay on. Used 1" steel for the sides and 3/4 for the bed. Centered a bike tire in the middle. Had to use 4 braces, 2 on ea side for stength. You can go as fast as you can walk. Made it so the height is about waist high. Made handles about a foot long. Make the handles long enough so that the bed does not get in the way when you walk. Think it is 8 feet long and maybe 2 feet wide.Can be tough going thru brush. But if there is a trail to go on it works great. Don't have it at home so I cant give you any pics.

Link to comment
Share on other sites

Made one a few years ago and works well. Need 2 people. Looks like a ladder with a v shaped bed for the deer to lay on. Used 1" steel for the sides and 3/4 for the bed. Centered a bike tire in the middle. Had to use 4 braces, 2 on ea side for stength. You can go as fast as you can walk. Made it so the height is about waist high. Made handles about a foot long. Make the handles long enough so that the bed does not get in the way when you walk. Think it is 8 feet long and maybe 2 feet wide.Can be tough going thru brush. But if there is a trail to go on it works great. Don't have it at home so I cant give you any pics.

That sounds interesting. So it only has one tire? hmmm.

The ladder isn't a bad idea. I have an old aluminum ladder, perhaps I could use one side with a couple bicycle tires.

Link to comment
Share on other sites

I saw a big box store had one for $49 last week or this week, worth every penny in my book as I have hunted over two miles back in on WMA's. Great to be able to bring back a load for the whole day.

Link to comment
Share on other sites

I saw a big box store had one for $49 last week or this week, worth every penny in my book as I have hunted over two miles back in on WMA's. Great to be able to bring back a load for the whole day.

Big Box Store? Is that in minnesota?

Link to comment
Share on other sites

I bought a game cart a few years ago that had the plastic spokes. I got a nice buck about a mile and a half from the truck. We put the deer on the cart and went about ten feet. When we went over a bump, the tire broke right off from the sideways torque. I now have a homemade cart made out of conduit with ten speed tires on it. It has a pull handle, and it works great in just about any terrain. I agree, the bigger the tires, the better.

Link to comment
Share on other sites

I second watching out for plastic spokes. This one maybe went 5 feet and hit a bump and the wheel fell off from the spokes after a minor bump with the first deer on it. Can't remember the name brand but I do remember the plastic spokes on it so fabricating something from home that is solid would work out much better.

Link to comment
Share on other sites

Very nice Elk. I was wondering how you handled the axle part of it. Thank you for spending so much time trying to get the pictures posted. I didn't mean to kill your entire day. But the pics give me a nice starting point.

Link to comment
Share on other sites

I'm going to check out the handtruck tomorrow, Deerminator. Thx for the idea. I think I like the idea of having very large wheels like Elks though. I might put them a little closer together to navigate tight spots.

ELK do you like the width between the wheels for stability, or do you sometimes wish they were closer together?

Link to comment
Share on other sites

I hunt at Sherburne Refuge. It's lots of fields with sand and gopher mounds. The wide track makes the cart very stable and easy to pull. You're not fighting it from tipping over like some of the carts I've used. A narrower track might be easier to get through the trees in the big woods.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.