Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Say goodbye to your crappie minnows


CrappieAttitude

Recommended Posts

I too have made a leap to plastics, but the old school in me forces me to purchase a scoop of minnows just in case. I typically will dead stick one line with a minnow and bobber a foot and a half off the bottom or so. With the other i'll use the vex and jig anything from a small jigging spoon to a tiny jig with a spring bobber with a wide veriety of plastics. I too have noticed that this techique will catch more fish quicker than using live bait but there are times when those crappies just want the minnow. I have been actively jigging, varying the technique from large slow sweeping jigs to short quicker quivering motions only to see my bobber in the other hole continue to go down. I do beleive that the jigging plastics approach does bring in fish quicker than live bait does. I won't say that I only use plastics because I think it is neccessary to be versitile and prepared, and frankly live bait is just another tool that has it's time and place.

Link to comment
Share on other sites

Great thread guys...lots of good info. I can honestly say I've never been much of a believer in plastics -- always been a minnow guy. After reading this post however, I'll be going to the baitshop before heading out on the ice tomorrow to pick up a few varieties to give em a try -- I've found a little spot that treated me well last weekend, but action was hot and cold, even tho fish were there the whole time...this looks to be a perfect opportunity to try this.

Anyone care to give me a starter list of must buys? I'm looking forward to trying something new.

One other question --if I'm understanding the technique, leave the bobber off and use the plastics under the Marcum with different 'presentation methods'?

Thanks much!

Link to comment
Share on other sites

Great thread guys...lots of good info. I can honestly say I've never been much of a believer in plastics -- always been a minnow guy. After reading this post however, I'll be going to the baitshop before heading out on the ice tomorrow to pick up a few varieties to give em a try -- I've found a little spot that treated me well last weekend, but action was hot and cold, even tho fish were there the whole time...this looks to be a perfect opportunity to try this.

Anyone care to give me a starter list of must buys? I'm looking forward to trying something new.

One other question --if I'm understanding the technique, leave the bobber off and use the plastics under the Marcum with different 'presentation methods'?

Thanks much!

Eckie,

Here's a link to some folk's favorites. Plastics

I work them without a bobber. Although using a spring bobber can be the ticket at times.

Link to comment
Share on other sites

Well,the secrets out so,I'll chime in here.Yup.Had a youngster teach me the magic of maggots so many years ago now that he's no longer a youngster.Haven't bought a crappie minnow since.They work well on eyes and perch too,under the right conditions.There may be bodies of water that minnows will work better on but,I've not seen it.I've heard the St Croix is one of them but,I've not fished it to prove otherwise.My experience with plastics has been,when they're hot,they're hot.When they're not there's maggots.I carry an assortment of plastics always when I'm panfishing but,I'd rather forget to bring my plastics than forget my spikes at home.

Link to comment
Share on other sites

what I have learned with plastics, especially this last summer and spring was when you use new plastic you have to throw a minnow on. The minnow stays on til you catch a fish or the minnow just falls off. I keep using the jig with the same plastic till the it falls off or til it is just barely hanging on there catching fish. So then, I would through new plastic on it, with no bate, no bites, til I put a new minnow, with the new plastic. Then I instantly get a bite.

Link to comment
Share on other sites

I see that we have a bunch of plastic users.They do work great.just a plain hair jig kills those slabs too.

08iceseason324-1.jpg

the thing about plastics or other hair,fur,feathur jigs is that you can control your size.

I believe those slabs are more profile orientated than anything.

Setting a minnow uder a bobber is one way to catch slabs.The other way is a bit more aggresive which is working the entire water column.

I believe you have more chances working all of the fish instead of the ones that come through at a certain depth.

Just my 2 cents.

CK

Link to comment
Share on other sites

I was out this weekend, and didnt have much luck with any of the plastics in my box. From noodles to power minnows.

These fish wanted meat. We cleaned up on them using waxies and minnows, but for the first 30 minutes I couldnt get a hit on anything I was putting down there made of plastic. Plenty of lookers.

Thank god my buddy brought along some minnows and waxies, it would have been a frustrating day without them.

Link to comment
Share on other sites

I was out this weekend, and didnt have much luck with any of the plastics in my box. From noodles to power minnows.

These fish wanted meat. We cleaned up on them using waxies and minnows, but for the first 30 minutes I couldnt get a hit on anything I was putting down there made of plastic. Plenty of lookers.

Thank god my buddy brought along some minnows and waxies, it would have been a frustrating day without them.

Link to comment
Share on other sites

90% of my fish i catch are on waxies or euro larva. I will dead stick a minnow just because i can have two lines, but it's always the least productive. Plastics alone I've never had much luck with, i still like the sent a waxie or larvae brings to my presentation.

Link to comment
Share on other sites

Plastics are great, but I agree many times the fish want some kind of scent of "meat" and I ALWAYS tip my mine with euros, without them I have a much harder time getting fish to bite. Then again there are many different plastics and if you swithed around enough there is one that will nail fish without bait, but if you dont have time to be trying all sorts of different presentations, tip them with euros and almost all with catch some fish.

Minnows, I rarely use but have found times when that really all they wanted, at least from the choices I gave them. Doesnt happen often, usually its the other way around and you could sit all night and not get bit on a minnow while I nail crappies with the euros on jigs.

Link to comment
Share on other sites

I love to use minnows on a bobber rig in late March, on the ice, fishing into the night, or as the dark is turning into dawn, by lantern, fishing outside when it is starting to warm, no wind, no holes freezing up, with the sound of duck wings flying overhead. I love it when they pop it and then a second later the bobber starts slowly going down until you set that hook into another slab!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.