Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Anyone Ice Fish Without A Shelter/Shanty?


blodngoods

Recommended Posts

First year I would not buy a portable shelter since money is a concern. Buy a flasher instead and pick your days. If you hate ice fishing it will be easy to sell the flasher. Biggest thing to look at in the weather is WIND. If you can find some river backwaters or lagoons that are out of the wind you will be fine. Some boot chains are worth it from the start though. Eat before you go out.

Link to comment
Share on other sites

The first year I started I had a hand auger, pole, a little tackle, and a bucket!

The second year I bought a shelter and a heater.

Its just snowballed from there!! grin

Ditto for me except I bought a power auger the first year.

Link to comment
Share on other sites

I came up the same way, it all started with just the bare nessesities, a rod, some tackle and a bucket. Well then I contracted EGD. I didn't really notice the warning signs at first. I soon owned multiple rods & tackle, then came the portable shanty then another. That wasn't enough... then I had to build a permanant shelter. My EGD was out of control by then, my wife was really concerened and was contiplating an intervention. Well she should have acted because then I bought sleds to drive out to the fishhouse and then came everything associated with towing portables! I really thought I had everything and then they came out with the SnoBear!

My EGD (Excessive Gear Disorder) is still out of control!

Does anyone know of a cure? I heard from a buddy of mine that a nasty divorce cured his EGD... grin

Link to comment
Share on other sites

I agree on the Pack Shack. I have one and it would work pretty well for pretty cheap for what you are describing. You can haul it on your back or throw it in a sled. If you are "hole-hopping" then just use it as a chair. If it gets really cold, then you flip it over and it at least keeps out the wind.

Too bad you didn't pick one up last year. You could have got one for $30.

Link to comment
Share on other sites

A smale sled, a Clam chair, and a 7" hand auger will serve you well for well under $125

FEATURES:

• Folding Chair Converts into a Gear Bag and Rod Case

• Padded Seat with Four Contact Points (legs) for Balance

• Built-in Fish Bag

• Stores & Protects 6 Rod & Reel Combos

• 2 Easy Access Rod & Reel Scabbards

• 2 LONG Accessory Compartments: Tipup Length!

• Exterior Mesh Storage Pouch

• 2 MEDIUM Accessory Compartments: Tackle Boxes & Bait

Weighs only 12 Pounds

You will have rod storage plus room for all the ice gear you will ever need in a trunk sized lightweight package. The clam chair alone may do it for you, and a hand auger?

Link to comment
Share on other sites

If not too cold or windy, I prefer to fish out side hole hopping. I have a small sled that has high sides, fits everything, and has a cover to keep any gear from falling out. I think I paid around $60 for both.

As Dtro implied ... one of the keys for doing this is to get a decent ice fishing suit. They really keep you warm and the padded water proof knees make them a must. There is a lot of options, Vexilar sells bibs & jacket sperately and are reasonably priced. If you already have a decent winter coat, you can save some money by just buying the Vex Bibs ($80) Unless it is really cold out, I normally don't wear the jacket anyways (just a hoodie).

Also, make sure you have some very good boots that are water proof.

Link to comment
Share on other sites

jwhjr -- I am in cottage grove too, if you ever want to hook up be more then willing to go out, be nice to meet more people in the area with the same addiction

I'm always up for going out and hopefully learning something new. Hopefully we'll be able to coordinate something.

Link to comment
Share on other sites

last year after i bought my fl20 vex i didnt set my house up once mobility is the key learned that on here by the way smile

Love the FL20's screen - snow does not collect on it on snowy days on the open ice. The night mode is also a great unique feature, much easier on the eyes at night.

Link to comment
Share on other sites

Boot chains are a great inexpensive investment and you are a lot more stabil on the ice. Don't forget a $3 pair of ice picks to put around your neck just incase you fall in.

agreed on the ice picks. They're well worth the investment in piece on mind alone. PLus, the cost of the picks is a lot smaller than the cost of a search and rescue effort.

Link to comment
Share on other sites

The wind is the biggest issue. It's nice to jump in the portable and get out of the wind for a few moments. The shelter will also keep your holes open for the most part when you're on top of them. I use a Fish Trap Pro and it's perfect for hole hoping and still being inside. I do a lot of both. Get a one man if you want to hole hop. If you want to set up, get a two man.

Link to comment
Share on other sites

Get Artic Armor-----Im 60 and sat out at least 20 days last year in everything from 25 degrees to -5 with a howling wind-----hands getting cold was the only thing stopping me----a side benefit, you will float if you go thru----bought from walleye dan in Baxter 2 years ago before the Extravaganza----best money I ever spent.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.