Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Fuel stabilizer run in the summer?


EricD

Recommended Posts

I am getting a new boat with a Mercury 115 4 str. I was chatting with a mechanic the other day and he suggested that I use stabilizer in the fuel all the time. He thinks that fuel additives and ethanol in the fuel can make it unstable even after a few weeks of sitting and it's good preventative care to drop a bottle into the tank each time I fill it up. What do you think?

Link to comment
Share on other sites

Won't hurt anything. Probably won't need it if you plan on using it at least every few weeks. My motorcycle dealer puts it in everything they set before it goes on the floor. They told me that sometimes a bike or atv might sit for awhile before it is sold and this prevents problems. Ain't no fun fighting with a fuel system that gets gummed up.

Link to comment
Share on other sites

It's 100% dependent on how often you're going to be using the boat. If, like Hafnutz said, you're planning on using it every couple of weeks you'll be fine. If it's going to sit for a month I definitely would put a fuel stabilizer in it to prevent problems in the long run.

marine_man

Link to comment
Share on other sites

I use a little seafom in every tank to prevent problems since it supposedly is a stabilizer and also helps to prevent moisture problems. I think a stablizer is a good idea and fairly cheap to do.

I had a problem 2 summers ago with a bunch of water getting into my fuel tank. The boat went to the dealer who gave me a bill for close to $300 to diagnose and remove the bad fuel. I always run premium non-oxygenated now to hopefully prevent this problem in the future. Ethanol seems fine for my vehicles, but it's not going in my boat.

Link to comment
Share on other sites

Seafoam does a good job of stabilizing as well. Buying premium gas doesn't really help you with gas life - if it's the non-oxygenated type there won't be any ethanol, which might help a little, but it's not going to be a dramatic improvement in gas life.

marine_man

Link to comment
Share on other sites

Whether or not non-oxy stores better I couldn't tell you, but it sure makes me feel better when I put the boat away in the fall with two full non-oxy seafoamed tanks. After those get burned up in the spring its nothing but the cheap stuff! Can a guy say that anymore?

Link to comment
Share on other sites

I know this topic started out with a 4 stroke, but here is some info the guy who I bought my rebuilt 2 stroke from gave me. He told me the non-oxy gas was best if you can find it, its 100% petro and none of this Ethanol that can be hard on a lot of older engines like my rebuilt. He also told me that he went to a Yamaha class and they put two 2 strokes side by side. After 400hrs the engine that had the Ring Free/Carbon Guard product in it looked like it was still newly rebuilt when examining the engine. Airjer you are right, I don't even pay attention to gas price anymore, its too painful.

Link to comment
Share on other sites

Non-oxy gas with seafoam in all motors besides my truck. I have not had one fuel related problem ever. I even put 1 oz to a gal in my truck every 5-6m miles. Have I been lucky? Maybe. But with over 60 cylinders to take care of I like the odds of the way I have been doing it.

Link to comment
Share on other sites

 Originally Posted By: airjer
Whether or not non-oxy stores better I couldn't tell you, but it sure makes me feel better when I put the boat away in the fall with two full non-oxy seafoamed tanks.

I agree with you, but the main reason I feel better about it is because there's no ethanol in it. Either way you still need to have a fuel stabilizer of some sort in it, non-oxy or not.

marine_man

Link to comment
Share on other sites

I'm a big fan of Sea Foam. I haven't run it through my boat motor yet but will be on my first fill this year. I used it in a lawn mower I was having troubles with, and it made a world of difference. Half way thru the lawn I'd have to pull the choke almost all the way out. After a little Sea Foam, ran like a top all the way through the lawn.

Link to comment
Share on other sites

When I got my 15hp Johnson it ran like [PoorWordUsage]. had to pull it 20-30 times to start it. ran a full can of sea-foam in a 6 gal tank now it runs like a top and starts on the first or second pull every time, so now I run sea-foam in every tank of gas and have never had a problem in the last 8 years.

Link to comment
Share on other sites

With any 4stroke you should use a carbon build-up preventative. All the manufactures have their own house brand. Perhaps some of the after market stabilizers also have a carbon guard.

Good luck with your new rig, it sounds nice.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.