Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

X2 spacer bars


Neiko

Recommended Posts

I have used my x2 a couple times and the only poles that I have used are the spreader poles.....one in the back that holds everything from falling down or collapsing and the 2 that go on each side of the door......i use those to give me a better connection to the ice.....the roof poles i would only use when it is really windy.

Link to comment
Share on other sites

What do you do with the Reflectix when you fold it up or does it bend with it? Where do you get that stuff? I was going to just use some cheap survival blankets and feed them through the bars.

Link to comment
Share on other sites

I picked up the stuff at one of the large home improvement stores, but even the local hardware stores usually carry the stuff. The reflectix folds up with the canvas, the first fold is the most important. If yo ufold it the right way the first time, then it is easy from then on. The reflectix doesn't move around becuase I cut slots in it to feed the velcro loops that secure around the hoops. I reinforced the slots with aluminum tape. I've had this for 2 seasons now, and haven't had a problem since. Worth every penny.

Link to comment
Share on other sites

From what I have read the reflctix folds up with the house and it doesn't seem to make the packing of the house any tougher......I know building supply places will carry such as menards/home depot and such.....good luck

Link to comment
Share on other sites

the nice thing about the reflectix is that it keep the roof of your portable frost free and dry. I extended the roof flap down along the back door past the rear window. If I need to use the door or the traplink, I can roll it up quick.

To stay on track with the original post, the reflectix does a good job of keeping the hoops in place when the spreader poles are not attached.

Link to comment
Share on other sites

I've been using the X2 for it's second season now and have found the bolts holding the bottom of the seats to have come loose and one is stripped making it stop every time the seat is turned. Was able to replace the bolt that came out but the other bolt seems stripped out and will not come out and will not tighten. Tried to take the seat fabric off by unscrewing the four screws under the seat but it seemed like it was also glued on.

Anybody else have the bolts come loose under the seat yet?

Other than that it seems to be holding up rather well other than a couple small rips in the fabric. It's heavy but I guess that will make it last a long time.

Link to comment
Share on other sites

 Originally Posted By: dougger222
Anybody else have the bolts come loose under the seat yet?

Dougger222, just got done checking out my seats. One had a bolt missing completely, luckily it was in the bottom of my tub and the threads weren't stripped out. Probably would have had issues if you hadn't posted - thanks for the tip. LB

Link to comment
Share on other sites

I had the problem with my pro seat but they weren't stripped....Just lost a bolt and another was loose....I did rip the flap that covers the front window on my x2 this weekend pulling it out of the bed of the truck....caught it on a window nob on my topper...but I kept it warm with the big buddy all day!!

Link to comment
Share on other sites

I use a sunflower, mainly because it is smaller and easily stored and i can direct it at the hole to prevent ice build up.

On days like this last weekend where it was -15, I used 2 of them, both were on low and it was getting too warm.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.