Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lantern in portable safety


Walterwontfalter

Recommended Posts

I used to hang my lantern from the poles in the Otter, never had a problem, just keep checking it. Make sure the lantern is warmed up and burning correctly, I dont know about yours but when I first light mine it's mostly flames for a few seconds, you'll want to light it and get it running on the ice or whatever then hang it.

Also you could try some of that reflectex or whatever it's called, just wedge a piece between the pole an the canvas where the lantern hangs.

But in all honesty I've found that the lantern works better on the ice anyway. You definetly bang your head on it less. grin.gif

Link to comment
Share on other sites

As long as it's hanging below the canvas and not in contact you are fine. As said before, make sure you lite it on the ice. I had just tied some twine on my handle and then used a quick clamp to put it up. I've since went to LED, much brighter and no smell.

Link to comment
Share on other sites

I hang mine from a coat hanger. I light it up while it's on the ground though. It does take a while before the mantels get white hot and there won't be vapor flames coming out of the top. Frees the feet space but it's in your head space now. But now, I'm hanging a fan up there, so even less head space...

Link to comment
Share on other sites

I hung my lantern from the center pole in my old 4x8 and never had a problem. I made a hook out of a coat hanger like posted above. I had my lantern come crashing to the ground so whatever method you choose to use make sure the lantern can't be knocked off.

Link to comment
Share on other sites

Frabill makes portable ice house hangers you can buy at any outdoor store, I think I paid $5 for a 2 pack, they are very useful, I used to (before I got my lighting system rigged up) hang lanterns from them, or my rod bag. I have a Clam 5600, so just because Frabill makes them doesn't mean they only work in a Frabill house, either

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.