Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

pakshack


evinrude19

Recommended Posts

used mine for the first time this weekend, warm when the sun was out. I installed a vent so I could use a small heater. I believe that its strong point is using it for tip-up fishing. all in all, a special use item that works ok.

Link to comment
Share on other sites

I bought one on friday, and other than almost setting it on fire (another post has details) I liked it. Only drawback is only enough room for one hole to jig out of. BUT, when I fish out of my Clam 5600 with 2 poles, I don't jig enough, so only having one pole I constantly jigged it.

Link to comment
Share on other sites

I sat in one this weekend (in a store). I am 6'4" and there would be enough room for a Vex and one hole. You could also put a Mr. Heater in there. That would be about it. There would be some definate advantages, especially if you are the mobile type.

Link to comment
Share on other sites

i was just out in mine tonight in the north metro.. very nice deal for walking out onto lakes. im about 6 foot and it is perfect for me. I put my marcum in the front left corner one hole in the middle and my big buddy heater along the right side of the shack. No problems as of yet!

Later,

Ryan

Link to comment
Share on other sites

Hey guys...

The Pakshack is essentially a fold up camp chair with a flip over ice house attached to it. So you can sit in just the chair itself with the house flipped back, or flip the house over and be out of the wind.

The biggest benefit to the Pakshack is portability. I hiked nearly a mile into a fishing spot on Saturday toting my loaded up Otter Den behind me and a lighter weight alternative would have definitely been appreciated.

If you think of a Pakshack as a super lightweight house that is very portable, and takes up little space when stored, you have the right idea.

The Pakshack is obviously not going to be a substitute for 1 man portable houses made be leading manufacturer's but it definitely has a unique place in the market, like I wish I had on Saturday!

Its a nifty little product!

Link to comment
Share on other sites

123912.jpg

I dragged my fully loaded portable out last Friday, and like hanson I was thinking after a couple hundred yards of heavy breathing, that I should of brought the Pak Shack instead. Not a ton of room in there, but enough to get things done. If the snow keeps on piling up and the ice continues to be iffy for vehicles, I can see myself using it a lot more than I thought I would.

Link to comment
Share on other sites

Another thing, one of my only real complaints about it is the bag you haul it in- its a back pack essentially, why not put a second strap on it? Hauling my stuff back to the vehicle the other night it slipped down my arm a couple times.....

Link to comment
Share on other sites

How do you move it from hole to hole? I'm guessing you have to put all your gear back in a different sled, but is there any way to drag the thing to the next hole or do you have to pack it back up and carry it to the next hole?

When everyone here is talking about portability, are they (you) talking about being portable to a hard to reach lake, or portable while on the ice? Just trying to get some information about them because I know a guy that is thinking about getting one.

Thanks!

gill man

Link to comment
Share on other sites

I saw an alternative to the pakshack on a HSOforum that is $10 cheaper, has windows on the sides and front and has two straps so you can carry it like a backpack. It was on the Red Rock wilderness store web site and is called the

HT Polar Xpress Pex-1 Portable Shelter

Link to comment
Share on other sites

If I went hole hopping with it, I wouldn't bother putting it back in the bag. It folds up and deploys in seconds. You would not be able to fit any gear in the bag it comes with. You could use a small kids sled to haul your other gear or even the shack itself.

If hole hopping I'd just fold it up, throw it on the sled with your other gear, and drag it to the next hole. Or tuck it under your arm while dragging the sled. Then deploy it at the next hole, it takes 5-10 seconds tops.

Link to comment
Share on other sites

Last year while packing up to go home from the lake the wind took off with the (back) pack for mine. That is the only complaint I have.

The thing I like about it is, you don't need a pickup to get it to the lake!

Link to comment
Share on other sites

One thing about the Pakshack that doesn't intrigue me is the way chair is made. I am not quite sure of the weight restrictions on the chair, but when it is cold out the chair gets brittle and tends to break where the pins are drilled through the legs. This has happened twice to me already last year! It is a nice little shelter but I prefer my Fishtrap Pro or my X2.

Link to comment
Share on other sites

the same thing happened to me doctor with a pin popping out when i sat down so i just took all the plastic cheapy screws out and popped a few metel ones into it. I also ripped my skirt the other night when i was movine. the skirt got iced to the ice and i tried to rip it free.. turns out that wasnt a good idea grin.gif anyway i just have a small rip in the back part of my skirt now. doesnt really affect anything but the resale value i guess.

Later,

Ryan

Link to comment
Share on other sites

yea it works pretty good to just get a couple that are just a tad larger than the plastic piece that goes on the metal baseish thing. then just drill right through the plastic and through the metal tube where there is already a hole and about 1/2 an inch out the other side. Hope this helps. if you need pics i could probably snap a few...

Later,

Ryan

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.