Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Transom Tie Down Recommendations


TKO_PUNCH

Question

I have tried the Cabela's heavy duty tie down straps and the handles keep bending. Once they bend, it's over time to get new ones. I have tried 3 different sets over the last 3 years, a set a year. Can anyone recommend a good brand that lasts and where to get them. Thanks

Link to comment
Share on other sites

14 answers to this question

Recommended Posts

  • 0

The rachet-style are nice. Boat Buckles. Don't have to haul them around back and forth everytime you load and unload since they are always attached to the boat trailer.

Link to comment
Share on other sites

  • 0

Whoaru, that is always what I do. However, it is always someone that is fishing with me that tries to help out in whatever way they can that usually does the bending. I try to tell them to just tighten the tension a little, but stuff happens. I'm just looking for a more robust design. Thanks for all the advise. Besides fleet farm, where else sells the boat buckles?

Link to comment
Share on other sites

  • 0

My recommendation is for the Rod Saver brand. They cannot be bent, and they work great for getting just the right amount of tension.

One thing about the Boat Buckles, if you travel on gravel roads much, they can get filled with grit and gravel and can be a pain. Also, if you ever plan on using the boat after freezing temps (river in winter, duck hunting, etc.) they will freeze after being in the water smile.gif That stinks. If you only are out on pavement and not in cold temps, then they would be perfect. Just my two cents smile.gif

Link to comment
Share on other sites

  • 0

Quality 6' ratchet tiedowns is all I ever use. I got a pair of those silly lock over tiedowns with my new boat a couple years ago. They were in the garbage before the second trip. Those mounted tiedowns look nice, but I can get a pair of quality tiedowns for a little more than half the cost of one of those mounted ones. The other issue I have with the mounted ones is getting them wet. Not drying the webbing out can cause the webbing to break down. It would not be good to have the straps fail, when you need them the most. Just keep in mind when using the ratchet tiedowns, which ever type you get, only snug down the boat, don't overtighten.

Link to comment
Share on other sites

  • 0

Quote:

My recommendation is for the Rod Saver brand. They cannot be bent, and they work great for getting just the right amount of tension.


I would have to second the Rod Saver Brand. They are very easy to adjust, and I don't mind putting them in my vehicle at the landings. For the 30 seconds it takes me to cinch them down, I would rather use the money saved for something else.

CA

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.