Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Water temp - the magic number!


sawgrass

Recommended Posts

There's the stair-step theory that 65 is good, 55 is better, and 45 is best. Kind of depends on if you're looking for numbers and action, or big fish. Action starts as the water temps start dropping, the numbers of big fish start going up under 50 degrees.

I mostly troll in the fall, the fish are hungry and feeding and I like to cover water.

Link to comment
Share on other sites

The bite sems to pick up for me once the water temps hit the mid 50's. I usually figure the 50 degree mark to be the pivot point where I start using plastics in rivers and dramatically slow down my trolling speed on lakes. I also bring the jig box back out of hibernation and start pitching points and dropoffs.

Same with spring time. On rivers it means pull out the handliners and the trolling rods, because it is going to be a numbers game!

mw

Link to comment
Share on other sites

Can you guys fill me in on the "plastic bite"? I deep jig and cast cranks from boat and shore at night but have had limited success with plastics...until this year when I had some action on a 5" Berkley Swim Shad.

Thanks

Chuck

Link to comment
Share on other sites

I really like the Berkley plastics. The Power Shiners, pogeys and Gulp worms are great on a jig. I will also use paddle tails a lot and some ring worms. Ring worms are great down south but they just dont do too much up here. I have only had a few times where a ring worm works better than a minnow imitation. I know they are great on the mighty miss and others though.

If Im anchored and can use 2 rods I love dead sticking a super do or a big crawdad plastic. Just the movement in the boat gets these things moving enough to get fish to hit them. I have had some HUGE strikes on deadsticked super do's.

Those 5" berkley paddle tails you toss will be great this time of year and again in the spring. I like to toss them out, let them hit bottom, hop them off bottom and then swim them back with a few pauses to let them free fall close to bottom again. Usually no doubt when you get a bite on them.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.