Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Rod Holders


harvey lee

Recommended Posts

Here's what I have for shorefishing:

First, I have some sections of PVC pipe (about 12 inches) that the butt of my rods fit comfortably. These are duct taped to a section of rebar so that there is plenty of rebar sticking off the end of the pipe to plunge into the ground. You could also use hose clamps, but in reality, the duct tape is more than sturdy enough. These work very well in area where you can actually stick them into the ground (no rock or concrete). I sharpened the end of the rebar, now, so they should work even better. I've got a commercially made holder, but I think the home made ones are sturdier, and they are cheaper.

For areas with hard ground or concrete, I made the following this winter:

rodholder9md.jpg

It's a 5 gallon bucket with the same PVC pipe holders on the side. I just screwed them on at the angle that I wanted my rods at. The holes in the PVC are where I drilled so I could put the screws it. They are countersunk in the PVC so that they won't tear up your rod grips. After I fastened them with nuts on the inside, I sealed them with epoxy so I can put water in the bucket to make it heavy. I've olny used it once so far, but it worked very well with a bunch of no rolls in the bottom to weight it down. It looks like a good way to lose a rod, but it actually stays put very well, and I'll either always be right next to it or have the clicker on, so I'm not too worried about losing it. I'm sure my comfort factor will improve the more I use it.

Link to comment
Share on other sites

Hah, you beat me to it, dtro grin.gif

I got the idea off of another HSOforum, but that guy actually mounted boat rod holder on the bucket. I thougth this would be a cheaper way to see if I thought the idea worked well enough to invest a little money into.

Link to comment
Share on other sites

I have also seen a PVC pipe just stuck into the ground and I have seen it attached to a chair. I bought one of the those steal bird feeder poles with the forked end you stick into the ground,I cut the top off and with a torch bent it into a rod holder...I can't fish without it. Catfish Connection has some simular rod holders (HEAVY DUTY ROD HOLDER, UNPAINTED) for a good price if you dont want to make one.

Link to comment
Share on other sites

I prefer the kind you stick into the ground too. I don't have any pics at the moment but they used to sell a real good one on this site. I also have a home-made welded job that works great.

Link to comment
Share on other sites

Quote:

that guy actually mounted boat rod holders on the bucket.


That's what Comancharo "Jim" had down there the other day he uses water in the bucket to hold it in place real sturdy that way he said.

Your way seems real easy and afforable...nice

Link to comment
Share on other sites

Quote:

That's what Comancharo "Jim" had down there the other day he uses water in the bucket to hold it in place real sturdy that way he said.

Your way seems real easy and afforable...nice


Yeah, that's who I got my inspiration from. Maybe I should start selling them grin.gif

Link to comment
Share on other sites

His name isnt Jim.. Its SteveD .. I see you guys are as good at emembering names as I am! grin.gif

The rod holders mounted on a bucket is an excellent idea, and quite sturdy if you put some water in the bucket. I prefer holders that can be stuck in the ground myself.. but unless you have a Jack-hammer handy.. its really difficult to drive anything into the ground right now(frozen 3" under the surface).

I like the rod holders that stick into the ground and have a large coil spring on the top. I know they have these at Moores bait in Minneapolis for about $8 I think? Very easy to get the rod in and out of the holder, sturdy, and that spring action really calls your attention on the light bites because your entire rod will jump.

I dont know what company makes them. They are usually a florescent green in color.

Link to comment
Share on other sites

I just jam a stick in the ground with a "Y" on top. It's simple, and best of all it's free! It might sound stupid, but I have fun trying to find the perfect sticks when getting ready for cattin' from shore. crazy.gif

Maybe it's just the Red Neck in me, but I think my free stick works just as good as anything else out there. As for the PVC in the ground, I think that sounds good too! Your rod butt won't be in the mud then.

How does that rod holder on the bucket work? I would think the bucket would just tip over? How in the world does the bucket stay put, Do you have to constantly sit on it?

Link to comment
Share on other sites

ah, water! That would work. I tightline a lot and use circle hooks, that's why I was asking. I know just the current can pull on your line pretty good with a big chunk of bait on the end. I was looking at it from that point. But clickers, lighter current or smaller bait's would work well.

Thanks for the response.

Link to comment
Share on other sites

Ah, the perfect Y-stick. Who else but a river rat would look at a branch and see it's true purpose. Its not stupid Catman....You do need just the right piece! They do at times give away the good fishing spots too...don't forget to pull them out when you leave grin.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.