Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Gander Mountain guide series rods


midwesthunter

Question

11 answers to this question

Recommended Posts

  • 0

I have an older one .. about 6 years old .. very good rod. Its an 8'6" medium heavy.. nice moderate taper to it makes it excellent for super braids, or casting spoons 100 miles when spooled with mono.. Its my most used rod out of more than 30... must be something good about it.

Link to comment
Share on other sites

  • 0

The Gander series rods are about all I use. I usually buy the best in the series. I think this year the best they offer are the "pro series" IM8. They have different "levels" and at the best - they are still priced well below other comparable rods - so I just buy the best on usually about 59.00 compared to 39 or 49. I really like them and have used them for a long time. I also have a rod from Galyans ( before they switched to Joes) that I like alot too. At both Gander and Galyans I had to replace a rod that had broken off due to a car door shutting and breaking the tip. Either store never gave me a problem.

Link to comment
Share on other sites

  • 0

I had one, got hung up on some rocks, tried to pull it loose and the rod snapped in half. So I brought it back and they gave me another one, same thing happened again. It was a 6'6" med action rod I use for walleyes. I talked them into giving me a Berkley Lightning rod this time. He said the warranty is only good for Guide Series rods but he made an exception. I fish Traverse and Big Stone a lot so you know how many rocks there are. Of all the rocks Ive tried to get loose on, Ive never broken a rod until the Gander Mtn series rods. FYI

Link to comment
Share on other sites

  • 0

I own 2 Gander reels, a Tournament GST35f on a 6'6 trolling rod and a Pro Select GSS30 on a jiging rod and they both are made by Pfluger. As for rods I have a GUL-562uls Ultra lite for crappie fishing and the Gray Tournament rod for jigging (for got #). The Tournament rods I think are the best around, Med Fast action.

I found that the combos are not as nice if you buy a reel and a rod. I bought a combo like you and did not care for it. So they gave me a credit to get a reel and rod. I spent a little more but to me I got a lot more. Plus if it breaks or you do not like it, they ask no questions and return it.

Link to comment
Share on other sites

  • 0

I also use Guide Series almost exclusively. They are very nice. I have a Walleye Series that has been discontinued, but is an IM8 and very nice, I also have a light action IM6 that I use for crappies. I'm currently looking at getting a IM6 or 7 Muskie rod from them.

Link to comment
Share on other sites

  • 0

Hey fin finder man ya gotta point the rod directly at the rock if your going to break the line to get it loose. Either that or get lighter line. Also loosen your drag good golly.

Har Har

LOL.

Link to comment
Share on other sites

  • 0

I have two ice fishing rods\reels from Gander and just bought a 7' Medium Hvy. casting rod (IM7). The reels arent all that great, I dont think they've gotten the concept of instant anti-reverse yet, but the rods are great.

Link to comment
Share on other sites

  • 0

I have several of these rods and I like them very much. I took a buddy out fishing the othr day. He tried like heck to break the rod jerking tubes off the rocks but he failed.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.