Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Jiffy Extreme


MJBaldwin

Recommended Posts

Hello all,

 

i just picked up a jiffy extreme 8”.. used off the hsolist site.. although was never used as they won at an action...   worked great first weekend out even had it in the cab of my truck. Although noticed some smell of propane in the garage the other day and seems to be leaking propane now? Unhooked and could hear the 1 lb wissle (worthington) threw that one away went to screw a new one one (Coleman) and seems to still be leaking maybe from regulator just kept it off to see thoughts 

Link to comment
Share on other sites

8 minutes ago, bobberineyes said:

Ya if its natural gas, here I thought propane was a liquid that frosts up at leak points..

 

Well, any escaping pressure will cause bubbles in soapy water-No? ?

Edited by leech~~
Link to comment
Share on other sites

15 hours ago, bobberineyes said:

Ya if its natural gas, here I thought propane was a liquid that frosts up at leak points..

 

Liquefied petroleum gas=propane   You are burning the vapors that comes off the liquid.  

Link to comment
Share on other sites

I'm going off of  past experience with machines not sealing properly,  lp is dangerously cold and frost would build up at the metallic fitting every time. 

On 1/29/2019 at 9:03 AM, bobbymalone said:

 

Does it frost up when it comes out of the nozzle in your lantern/heater/BBQ grill?

The only unit here that uses lp is an old mr heater with a metal male connecting to the tank, and yes if it's not secure it will frost over instantly when not sealed. 

 

On 1/29/2019 at 10:32 AM, leech~~ said:

 

Liquefied petroleum gas=propane   You are burning the vapors that comes off the liquid.  

Were all well aware of that,  but the post was of an auger sitting idle not burning anything and leaking,  so if ya wanna give it a bubble bath go ahead , I just stated look for frost as sign..

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.