Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Anybody Spit Roast Small Pigs?


Recommended Posts

My buddy and I got a great deal on two 40# pigs (fully processed and frozen) from a butcher shop after someone backed out on the order.  Out plan is to spit roast them for a Labor Day pot-luck.  Looking for any additional tips or suggestions for smaller pigs like this.  Were doing them on the spit pictured below and our plan so far is to:

  1. Have the butcher slow thaw in their walk-in for 4 or 5 days or per their recommendation.
  2. Pick-up the day before and remove any missed hair, then inject and hold in a kiddie pool with ice and a blanket for insulation.
  3. The morning of the cook we will head to the site and start the fire so it has time to settle down, meanwhile --- remove the heads, tail and trotters --- u-bolt the pig's spine to the spit along with a couple of twine trusses --- score the skin about 1/8" deep --- season the outside with salt ---  season the cavity with salt + pepper + BBQ rub --- add some garlic cloves and lemon quarters to the cavity --- stitch the cavity up with cooking twine --- tie back the legs --- oil the skin --- then start the cook with coals under the shoulders and hams --- use an apple juice based spray during the cook --- monitor the loins so we don't overcook --- and remove when the shoulders and hams get 175°.  We're allowing 4 hours for the cook time.
  4. We will have a cafeteria table with a couple of jack stands to set the spit on --- let rest for 30 minutes --- then start carving away starting with the loins, then breaking down the shoulders and hams. I want to reserve some nice crispy skin in each of the foil serving trays, and I have a Cambro for holding if needed. 
  5. Here is my buddy's spit roaster built by his Father in the 70's for roasting lamb, which we do each year, sometimes with a goat too. It's lined with fire brick and holds the heat well.  The motor is a variable speed.
  6. We will have an portable shelter to keep the cooks out of the sun, and a couple of fire extinguishers just in case.

 

StZW2x4.jpg

Link to comment
Share on other sites

I would speed the thaw time up. Bacteria multiply at a certain pace and while temperature is a factor prevailing wisdom says keep it in the danger zone as brief as possible. Every multiplication cycle the bacteria count doubles so things can change rapidly.

You might consider bringing or salting it when frozen so as it thaws the salt inhibits bacterial growth plus helps make the pork yummier. 

Link to comment
Share on other sites

9 hours ago, thirdeye said:
  • Have the butcher slow thaw in their walk-in for 4 or 5 days or per their recommendation.
  • Pick-up the day before and remove any missed hair, then inject and hold in a kiddie pool with ice and a blanket for insulation.

It sounds like you have this handled. Man that is going to be some good pork!

Link to comment
Share on other sites

9 hours ago, PurpleFloyd said:

I would speed the thaw time up. Bacteria multiply at a certain pace and while temperature is a factor prevailing wisdom says keep it in the danger zone as brief as possible. Every multiplication cycle the bacteria count doubles so things can change rapidly.

You might consider bringing or salting it when frozen so as it thaws the salt inhibits bacterial growth plus helps make the pork yummier. 

Good point. I was hoping their walk-in would be in the 36°-38° zone just below the danger zone. I know they store their fresh sausage and boxed beef in there.  If we picked up too early we would run the risk of not keeping it cold enough.  I'll get with them and see how they normally handle a slow thaw.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.