Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Steger - Camuk's or other warm boot

Sorgy

By Sorgy
in Deer Hunting-Bear-Elk-Moose

 Share

Recommended Posts

Sorgy Proficient

Sorgy

Posted
Posted

Im looking for new boots for deer hunting NE MN and Ice fishing.

Does anyone have a pair? I walk 30 minutes into and out of my deerstand on average and then tend to sit for very long hours.

I need a boot that is comfortable to walk in and also warm on stand. How about any other Steger Mukluks?

I have tried some Cabela's Preditor Extreme Pack boots and while warm they are bulky to walk in. I have also had some 2400 gram insulated rubber boots- They were alright to walk in but later in the mornings my feet got very cold in them.

Im looking for the best mix of warmth and walkability.

Thank You

Steve

Link to comment
Share on other sites
NoWiser Mentor

NoWiser

Posted
Posted

Sorgy,

I sent you a PM if you want to check out the Steger Mukluks. I have a pair. I don't think they are quite as warm as the Cabela's predators, but I don't think I ever got cold feet in them while sitting in the stand. Unfortunately I can't wear the mukluks anymore due to a foot problems and, like you, I find the Predators too bulky. I think next time I'm near one of their stores I'm going to check out the Cabelas Still Hunter 1400 Pac boot. Looks like they have decent reviews but I'd like to see them in person. I wore my uninsulated Meindls this year and I think my toes almost fell off, even with boot blankets.

Good Luck!

Link to comment
Share on other sites
Wanderer Grand Master

Wanderer

Posted
Posted

I have a pair of Camuks and regular Mukluks. They don't make the Camuks anymore, just the Camuks Extreme which should keep you warmer anyway.

I think the regular Mukluks are warmer but wanted the waterproof lower the Camuks offered. I'll be wearing them this weekend. You simply cannot beat them for walking comfort in the snow and in the stand their breathability shines since I don't sweat my feet up so much on the way in. A foot warmer pack tucked inside helps for long cold sits though. EASY on and off for these boots; you don't need to lace them.

The one drawback: Don't let the soles get heated, not even by the heater of your truck while driving. The soles and lowers of the Camuks aren't exactly rubber and whatever the composition is will harden and get sticky if you heat them freely as you would any regular boot. Put them on when you get out of the truck and take them off when you get back in.

Link to comment
Share on other sites
titelines Experienced

titelines

Posted
Posted

I stopped into Steger's last year. I'd been meaning to for years and finally had the time to do so. I tried on 2 or 3 pairs of mukluks and I have to say..they may be most comfortable thing I've ever had on my feet.

That being said, I asked a lot of questions and a couple things stuck out to me. First, the warranty wasn't that good, just a couple years. Certainly not as good as other boots out there. Second, they were really spendy. Last, I asked what the typical lifespan is for them and the lady said..."you can get a good 5-6 years out of them, if you take care of them". I had a pair of Sorels that I wore for over 20 years before they fell apart...getting 5-6 years out of a pair of boots that expensive that you only wear 6 months a year seemed to be a really short life-span. I'm sure a lot of people have gotten more out of theirs, I can only go by what the lady told me.

I ended up getting a pair of Cabela's Inferno Pac-Boots for about 1/2 the price of the mukluks and love them. Feet don't sweat and I've never been cold. They're waterproof, windproof, have 2000 grams of Thinsulate and are really light and comfortable.

I love the mukluks...just couldn't justify it. Just my $.02.

Link to comment
Share on other sites
delcecchi Grand Master

delcecchi

Posted
Posted

I have a pair of Steger Mukluks. I usually wear them inside a pair of light rubber boots because of two reasons... They aren't waterproof and the thin rubbery coating on the sole is not made for concrete and blacktop. They are the old school type. If it is cold and you are in the woods you wouldn't need the rubber boots. Snow won't wear them out and if it is cold, wet won't be a problem either. But they are incredibly light and comfortable.

Link to comment
Share on other sites
mwal Experienced

mwal

Posted
Posted

I have Camuk Extremes and love them yes they are expensive. MY feet do not get cold and the light weight are worth it. I am diabetic and they allow my poor circulation to work and I can feel the ground and feel they are quieter in the woods. I recommend them.

Mwal

Link to comment
Share on other sites
B-man715 Mentor

B-man715

Posted
Posted

The Big C has a Trans Alaskan Pac boot that I'm interested in looking at further. A friend has a pair and they seemed light for their size. 3" of insulation under your foot.

They are really warm. But on a long walk they are too warm. Great for ice fishing!

Link to comment
Share on other sites
Wanderer Grand Master

Wanderer

Posted
Posted

I switched from my Camuks to my Mukluks for today's deer hunt. I hadn't worn the Mukluks for a good year (had them about 8 years now) while testing the virtues of the Camuks.

I was very happy to have my feet back in the regular Mukluks for this cold weather. They were great today. This weather and colder is what they're made for and I was impressed with them all over again. smile

Link to comment
Share on other sites
laker1 Mentor

laker1

Posted
Posted

I have Camuk Extremes and love them yes they are expensive. MY feet do not get cold and the light weight are worth it. I am diabetic and they allow my poor circulation to work and I can feel the ground and feel they are quieter in the woods. I recommend them.

Mwal

How do they hold up in wet conditions?
Link to comment
Share on other sites
mwal Experienced

mwal

Posted
Posted

I have never gotten wet in normal snow or light slush around fishing holes or auger spray. I will not fish in standing water so I have not tested that. The moose hide is rubberized. They worked great in this years cold WI deer season.

Mwal

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept