Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Managing Anchor Rope


vman11

Recommended Posts

This might be a trivial question, but I'd like to hear the different ways each of you manange/store your anchor lines.

I have 200' of 3/8" nylon rope for a water spike used on LOTW. That ends up being a pretty big ball of rope. Wave action requires it, but tangles, knots and frusterations are definately involved.

Link to comment
Share on other sites

Try a 5 gallon bucket. Tack the opposite end of the anchor and just start putting it in the bucket, like if you were pulling it up. I've used them on LOW and The Big Pond when corkin'. Sure makes the process a lot easier.

Link to comment
Share on other sites

I have a chain connected to my anchor at all times and the anchor and chain go in 1 storage locker. No rope attached.

I have 2 coils of anchor rope, one long one and one short one. Each coil is hand coiled and stored in separate storage lockers, in convenient locations where they are out of the way.

When anchoring I select the coil I need based on water depth, clip it to the anchor chain, and I'm good to go.

Link to comment
Share on other sites

As mentioned before, a solid container works best (bucket or dedicated storage compartment). A mesh duffel bag works second best, and allows for more compact storage.

The important thing to remember when storing a rope: The prettier you put it away, the harder it will be to take back out.

Just feed it into a container (bucket, compartment, garbage can, duffel bag) willy nilly with no care. It will come back out just as fast with minimal trouble.

It's when guys try to make it look pretty that massive tangles occur (like the open hand over the elbow technique or symmetrical coils).

If you have the room, and insist on a neat looking pile, lay it out on the ground or bow in a figure eight.

In my profession, we work with ropes up to 1200' every day. Other than rolling them back up on a spool, these are the best ways.

Also, a good double braid rope is a lot easier to work with than a cheap plastic rope.

-Hope this helps wink

Link to comment
Share on other sites

I use a plastic spool. I've thought about installing a removable arm that the spool could sit on which would make it much smoother to deploy and bring in. Wrapping rope around the spool can be a chore when your dealing with a lot of line but it saves me my fishing partner the hassle of dealing with tangles and knots all the time. wink

Link to comment
Share on other sites

Rope rescue (throw) bag or repeling bag. Or a cheap version, like i have, is a mesh draw string bag of descent quality (better if it can stand up and open on its own). The mesh is breathable and the draw string adds quick and ease to use. Google what they look like and see if you can make or modify somehting from target.$5-10 Works awesome!

simply load it by stuff it into the bag like you are coiling it.

http://www.poolweb.com/Home/Other-Product/WATER-RESCUE-BAG?gclid=CIqlgvnq5rYCFe1aMgodQwIAow ...here is a version of what I'm talking about.

Link to comment
Share on other sites

Last boat I used an old milk crate with the end tried to it. just throw it in there like Basseyes does and never have a problem. I used to try doing it the neat way but that always ended in a mess the next time I need it. Now I throw in my storage compartment. Put the end in first keep feeding till the anchor is in. When you need it just drop it over and feed. Works great. Just remember to put it in as you pull the anchor. DON'T pull the anchor in then put it away.

Link to comment
Share on other sites

Cord reels from Wal Mart....

Me too, and I have a whopping $0.97 tied up into it. Works great and takes up way less space then a 5 gallon bucket or milk crate- besides the milk police might arrest you for stealing! wink

Link to comment
Share on other sites

Make sure if using a bucket you have a few drain holes drilled in the bottom. Ropes can get mighty stinky if left wet all the time and can even weaken some types of rope. My preferred method of storage is similar to a 5 gallon bucket, but instead using a heavy duty milk crate(not the junky ones found at wally world, they break). They are harder to find, but allow the rope to dry between use.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.