Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Best boot to run and gun ice fish


muc33

Recommended Posts

Please, give me your best opinion on a warm boot for ice fishing. Is it a thermal rubber boot? Is it a pack boot? Is it Rocky, Danner, Clam. I have been using the rubber style 2000 gram boot for the last few years but finally wore them out, give me your pick for my new boots. I do a lot of outside fishing, and a lot of moving. I don't have time to get cold feet.

Link to comment
Share on other sites

Muck Arctic Professional Extreme's. Their warm, lightweight, and waterproof all the way to the top. I bought mine the beginning of last year and they still look new, icefishing 4+ days a week.

Link to comment
Share on other sites

i bought a pair of baffin crossfires and wont look at another brand again!! these boots are as light as wearing sneakers and kept my feet toasty warm and bone dry. i was on gull lake at the ice fishing extrav. all day with no hint of a chill!! they run about $130 but if your patient and wait gander might have another thankgiving day sale where i got mine for $90.

Link to comment
Share on other sites

I guess I would focus more on a well fitting boat for your foot so you are comfortable. Walking usually generates a lot of heat so the insulation may not be as big a factor. I would find a boot that you can lace up tight and is lightweight maybe a hunting boot with 600 grams or something. Then I would wear a lightweight wool sock and bring a pair of heavyweight wool socks to put on if you do camp out on a spot for a while. Switch to the warmer socks and dry the lightweights out by the heater. Personally I had some rockys i stopped wearing after about 6 trips and i bought some irish setter mountain claws. They are around 1000 grams insulation, I don't do much walking though. the irish setters are very comfortable but spendy.

Link to comment
Share on other sites

I guess I would focus more on a well fitting boat for your foot so you are comfortable. Walking usually generates a lot of heat so the insulation may not be as big a factor. I would find a boot that you can lace up tight and is lightweight maybe a hunting boot with 600 grams or something. Then I would wear a lightweight wool sock and bring a pair of heavyweight wool socks to put on if you do camp out on a spot for a while.

+1

if really truly running and gunning, you can wear anything lightweight and good fitting. late season I wear LaCross Alpha rubber boots (maybe 400 g insulation? not much) and stay plenty warm doing hole hopping in 20 to 40 degree weather

waterproof and good fitting would be my primary consideration, then warmth/insulation after that

Link to comment
Share on other sites

guys, I agree with the correct fit and all, but if you sit in a spot for a half hour in 400 gram boots in snow covered ice on your knees, you need warm boots. I am not talking about hiking, strictly for ice fishing. I am a big Irish Setter fan and own 2 different pair of upland and deer hunting boots. My need is strictly for ice fishing and all season. Again, valid points, but I just wanted to make clear, my true want. Thanks!!

Link to comment
Share on other sites

guys, I agree with the correct fit and all, but if you sit in a spot for a half hour in 400 gram boots in snow covered ice on your knees, you need warm boots. I am not talking about hiking, strictly for ice fishing. I am a big Irish Setter fan and own 2 different pair of upland and deer hunting boots. My need is strictly for ice fishing and all season. Again, valid points, but I just wanted to make clear, my true want. Thanks!!

Again I will say Mucks grin. You won't be disappointed. Prior to these, I used the black Mickey boots.

Link to comment
Share on other sites

I bought a pair of the predator extremes from the big C last year and have been happy with them so far. Still too early to speak about durability but they are warm. My #1 priority for an ice fishing boot is warmth. With that being said, I would not even consider anything but a pac style boot with a removable liner. The big C has those boots on sale right now as well as the 2000 gram model without the removable liner. Hard to beat the prices.

Dave

Link to comment
Share on other sites

I've become a huge fan of the Clam Ice Armor Onyx Boot. Very light weight and great for the angler who is on the move. I've been wearing them the past several years and have no complaints. Waterproof, breathable and most importantly very comfortable. I actually put them on once I leave the house and wear them the entire day... at the gas station in the morning, at the bar/grill for lunch and then back at the house after a day of fishing to shovel the driveway. A very versatile and outstanding option for the winter outdoorsman.

And for the ladies, the Clam Ice Armor Arctic Boot offers an excellent option for wifes, daughters, mothers, etc, who are looking for a boot to perform well in cold conditions. I bought a pair for my wife a couple years ago when they came out and she actually likes them smile In fact, the response I got was, "these even look good" LOL. My wife wears them a lot more than I thought she would.

A couple great options from Clam Outdoors!

Link to comment
Share on other sites

I have a pair of Irish Setter Snow Claw XT's and they are very warm. I have had them 3 years and as long as I spray them good at the begining of each season they keep my feet plenty dry.

I wear them when Im doing a LOT of walking but when I will be sitting for extended periods I go back to my old and trusted Ice Kings.

Link to comment
Share on other sites

I've been wearing Irish Setters (800gr) for the last 5 years. I was looking for something a little warmer when I not moving a lot.

I just purchased the Inferno boot from big C. They are on sale right now. This model is one step down from their pac boot.

Link to comment
Share on other sites

I wear the white Bunny Boots. They are the warmer version of the Mickey Mouse boots. I am the rare individual that is always warm, but my feet get really cold. I tried many different kinds of boots and the Bunnies work the best. They don't breath, but I stay warm. Even if I wear a thin sock I'm good to go. I also think they are comfortable. Picked up a brand new pair at the Ice Show for $80 and that is less much less than I've paid for other boots. Some of the best money I've spent on Ice Fishing. One thing to consider if you buy them is to get them from a reputable supplier because there are Chinese knock offs entering the market that don't work well.

Link to comment
Share on other sites

I drank the kool aid and found my new pair of Muck Arctic Pro Extreme's sitting at my door step earlier. Cost me $120, but my feet's comfort is worth it.

Initial thoughts are that they are very cushioned under my feet and a little snug at the calves, since they are a very high. Will give them a test run open water fishing this weekend. I'm not skilled enough to launch my boat without standing in the water, so I'll check for waterproof immediately.

Link to comment
Share on other sites

I also am a huge fan of the LaCrosse Alpha boots, but mine have 800 grams. I use them for sitting in the deer stand also. I have had them for about four years now and none of the edges have started to come unglued. By far the best boots I have ever had

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.