So one of my boots had a close call of the auger kind a couple of weekends ago (Yes, I got REALLY lucky--I kept all my toes, no blood even, and was able to continue fishing.) and now I have a hole to patch. The hole is near the toe, on the outside curve, in the rubber part of the boot (Sorel pack boot.) so it's not exactly a flat area.
While it's nice to have an excuse to buy a new pair, I'd rather try to fix these ones. I've got a lot of good miles on them, and we get along real well. Plus, fixing will probably require a much smaller dollar outlay.
So, anyone have a suggestion for a patch for the outside? I'd like to do the inside, too, but I really don't have any idea how I'd do that. So, suggestions for that are also welcome.
I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought.
Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just
buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
Congrats on the motor! I think you’ll like it.
I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers. 160 degrees is more than I expected to hear.
Curious why you’re opting for a 3 bank charger with a 24V trolling motor. Unless you don’t feel you be running you big motor enough to keep that battery up as well?
I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to
get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius)
says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
Question
TooTallTom
So one of my boots had a close call of the auger kind a couple of weekends ago (Yes, I got REALLY lucky--I kept all my toes, no blood even, and was able to continue fishing.) and now I have a hole to patch. The hole is near the toe, on the outside curve, in the rubber part of the boot (Sorel pack boot.) so it's not exactly a flat area.
While it's nice to have an excuse to buy a new pair, I'd rather try to fix these ones. I've got a lot of good miles on them, and we get along real well. Plus, fixing will probably require a much smaller dollar outlay.
So, anyone have a suggestion for a patch for the outside? I'd like to do the inside, too, but I really don't have any idea how I'd do that. So, suggestions for that are also welcome.
Thanks.
Link to comment
Share on other sites
18 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now