This August I have rebuilt three carburetors: my 9.9 yamaha kicker, my 18.5 hp kohler garden tractor, and , now, my 3500 watt generator (getting ready for deer camp). All three carbs were fouled by fuel I bought in June. All three engines were used just a few times over the course of the summer....but c'mon, is the modern fuel so poor that it will gum up an engine in as little as six weeks? O.K., I did not add a fuel stabilizer right away, but all three engines did get a dose of Sea Foam sometine during the summer.
So is anyone else out there having these problems? Should we run our outboards and other small engines dry before putting them away? Should we drain our portable fuel tanks after each use? I'm not talking over winter storage here...just how to keep a small engine from fouling up over the course of the summer. Thanks,guys.
You can post now ↓↓↓ or ask your question and then register.
If you have an account, sign in nowto post with your account.
Note: Your post will require moderator approval before it will be visible.
Dang, new content and now answers.
First, congrats on the new boat!
My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V. 80 might be tops? I’m partial to MinnKota.
How do you plan to use the trolling motor is an important question too.
All weather or just nice weather?
Casting a lot or bait dragging?
Bobber or panfish fishing?
Spot lock? Networked with depth finders? What brand of depth finders?
We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha
motor. I will be buying and installing a trolling motor, wondering if I can get some recommendations on what pound thrust I will
want for this boat? Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke
Mariner motor) I will appreciate any help with these questions.
I went ahead and watched some of the MLF coverage. Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.
Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
Question
basslkjohn
This August I have rebuilt three carburetors: my 9.9 yamaha kicker, my 18.5 hp kohler garden tractor, and , now, my 3500 watt generator (getting ready for deer camp). All three carbs were fouled by fuel I bought in June. All three engines were used just a few times over the course of the summer....but c'mon, is the modern fuel so poor that it will gum up an engine in as little as six weeks? O.K., I did not add a fuel stabilizer right away, but all three engines did get a dose of Sea Foam sometine during the summer.
So is anyone else out there having these problems? Should we run our outboards and other small engines dry before putting them away? Should we drain our portable fuel tanks after each use? I'm not talking over winter storage here...just how to keep a small engine from fouling up over the course of the summer. Thanks,guys.
Link to comment
Share on other sites
16 answers to this question
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.