MNDNR # on wheelhouse?

[timjones]

I have a new wheelhouse, first one for me. I want to put my MNDNR # on the door. The door is a crinkly surface so I don’t think the stick on numbers would stay on there. I don’t want to paint the numbers directly on the door. What have others done to put the number on the house?

[BD110]

Retired...

You can always put your MDNR# onto something that you can screw to your door.

[merkman]

If the door is metal you might want to try a magnetic sign.

You can get them made at most sign shops.

[ac777]

Type in Fish house Registration Numbers in the search on E B@Y a guy makes a fairly cheap aluminum sign with your numbers on them.

[freezdried]

Do you have to put it on your door or can it be any place with in view?

[GrizzlyAdams]

I have the same type of door your are describing so I put mine above the door on the siding. Worked awesome for me plus I didn't have to screw anything on. Didn't wnat to deal with leaking issues in the future.

[Bob/Mn]

I use a strip of white duct tape on my crinkle surfaced door.

[KTapper]

Sorry ot be off topic but.. This is my first year with a wheel house and I am wondering how do I get a license for it? and will they give me a DNR# when I get my license? Also is there anything else I need written on the outside? Thanks guys

-Kevin

[crothmeier]

your DNR # will be the same on all of your licenses/stamps...fishing, hunting, ect. It will be the same on your shelter license as well.

[KTapper]

Ok thanks for the info I wasn't sure. Do you still have to put your city of residence and your phone number on there?

[rugbymn]

Straight from the DNR HSOforum:

Complete name and address, driver’s license number, or the

nine digit Minnesota DNR number on the license of the owner plainly and legibly displayed on the outside in letters, and figures at least 2 inches in height.

[Wanderer]

Retired,

Stick your tag on somthing solid, like a small aluminum plate, or whatever, then put a glob of silicone on it and stick it to your door.

It'll peel off when/if you want it off.

[timjones]

Thanks for the ideas. I just noticed that the regulations don't say that they have to be on the door anymore, just on the outside. That gives me some other options.

[bak2MN]

I put my numbers up and down along the side of the door. And the registration card I cut a piece of plexiglass and put it behind that took out a couple of screws that held the sideing on. Worked for me.

[crappiekid]

Retired good to see you back on line! I will have to meet up with you this winter.

DO NOT SCREW INTO THE DOOR. I used a thin piece of aluminum or you could use tin too.MAKE SURE TO HIT STUDS of course. Use 2 inch reflective numbers. Put your MN DNR # on it.. IT must be door side though. Your shelter license can be taped on the inside of your window (Doorside) CO on Osakis says it is fine. My dad has plexi glass and screwed to siding by door and DNR number.

What kind of house did you get???

Take care,

Kid

[7outof10]

i use packing tape to put my registration and stick on numbers on the door

[sfd]

I put my numbers on the crinkly surface of the door and they stayed on four years now. Make sure to push any traped air out.

[timjones]

What kind of house did you get???

Take care,

Kid

I got an Ice Castle Sport Angler. It is 6.5 X 14 V nose. It also has the 2x3 rectangular steel frame instead of the usual Ice Castle angle iron. I also got a Polaris Ranger HD with the glacier II plow set up to get it out on the ice.

[rusty ironMan]

For my portable, I've printed my DNR number on a piece of legal sized paper (8.5" x 11"), then brought it to Office Max to have them laminate it. I think it costed a total of $2.00 to get it laminated. Not sure how you could attach it to your house... I put mine in one of the window sleeves of the portable.