Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Keeping your feet and toes warm?


mr_jman

Recommended Posts

It will not matter what boot you use if you do not dry it out after each trip if your feet sweat that much. You can wear a great pair of wicking socks and that will pull the moisture off you feet and into your liners. All you have to do is pull out the liners and air dry them but make sure to dry the inside of the boot with the liners pulled. My Lacrosse Ice Kings are close to 20 years old and I just buy new liners as the wool gets compressed and will not work as of effectively.

Link to comment
Share on other sites

Another issue that no one has addressed yet is keeping your legs warm.

Personally i have had the Sorel boots in years past and they were ok but feet did get cold. This year i bought a pair of Danner 1000g thinsulate boots. I was skeptical about these when i bought them thinking that they wouldn't work for anything under 20 degrees. But my feet have been comfortable all year.

Now with that said, if i go fishing with out my AA bibs, then my legs get a little cool in the house or outside and then It starts to feel a little cool in the boots after sitting in the portable with the feet on the ice for a while. But when i have the AA bibs on, then my legs are warm and the blood stays warm going to my feet which helps out alot in my opinion.

Link to comment
Share on other sites

I wear nylon compression socks all the time after having leg surgery a couple of years ago.These socks act as a wicking sock. I use to wear polypropolene socks as a first layer on my feet to do the same thing.A pair of lighter weight wool socks go over the nylon ones.I wear Rocky Blizzard Stalkers with 1200 gm of Thinsulate,that are 2 sizes bigger than my shoe size.I wore them all day on Saturday at the Brainerd contest, and did not have cold feet at all.I always pull the liners to dry them out after wearing the boots.Thick, heavy wool socks will make your feet sweat, and get cold.Layer up with thinner socks, and you will be fine.

Link to comment
Share on other sites

my feet sweat pretty good. I always carry a spare set when I go out. I drag out and set up and get the heater going. then I change my socks for a dry fresh pair. It does WONDERS. I also have a spare set of liners with me so Im sure I have a dry set.

Link to comment
Share on other sites

I purchased the Rocky 10" BlizzardStalker boots 1200 grams of insulation and waterproof at Dick's sporting goods and they work great.However I need some waterproof socks to take care of the sweaty feet:)

Link to comment
Share on other sites

I have a pair of Rocky Bearstalker 1000 grams that I have been wearing for work this year. Early on in the winter I had been wearing a pair of regular socks with wool socks over the top, and yet my feet would freeze. I think my boots were a bit too tight. Since then, I have stopped wearing my wool socks, and my feet have stayed toasty down to -45F windchill.

Link to comment
Share on other sites

My feet have always been cold no matter what kind of boots I purchased BUT NOW...I am comfortable doing the following...

...First I put each bare foot in single thin plastic grocery bag. I then leave a little bit of room at the toes but not enough to bunch up on me. I then take a pair of thin dress socks and put them on over the plastic, Then a pair of wool sox. I would venture to say the plastic adds an easy 10 degrees inside the boots. If you try this to experiment, you will feel the heat right away after putting on the dress socks over the plastic. Your feet stay warmer and your socks do not get all sweaty. Give it a try !

Link to comment
Share on other sites

Dogzlife000 said:

 Quote:

Well, if your feet sweat for whatever reason, you're gonna get cold during periods of inactivity. What works best for me is to hit the problem at the source. Spray your feet with antiperspirant prior to donning your socks and boots. You will be pleasantly surprised at the results.

^^I agree,This really does work^^ Kinda sounds nuts, but I have been doing this for some time. I use it almost every time I go out Deer hunting too, to keep down scent, by using the unscented types.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.