Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

vexilar question


jwjacob

Recommended Posts

i went out fishing last night and before it got dark my flasher was working fine. But after the sun set i could not get the screen to clear up, it was solid with green to light red lines from 18' to 30'. i was the only one using a flasher. the only other time i have had this issue was last year in the same spot. does anybody have any similar experiances. any suggestions would be great

Link to comment
Share on other sites

i've seen the exact same thing happen, it's the wierdist thing like someone fliped a switch. i dont have an explaination for it but id like to know what causes that to.

how was the charge on your battery? i know that this can happen on a low battery.

Link to comment
Share on other sites

Zoo Plankton. Very likely the fished started feeding on them as well. Often times the fishing is done when you see them come in. Yep typically just after dark on many panfish lakes. Nothing wrong with your Vex. Trust your electronics as you will definately learn from them.

Good Fishing!

RD

Link to comment
Share on other sites

I'll go with zoo plankton as well. This same thing has happened to me many times in one spot that I fish, always just after sunset, and does seem to shut it down for an hour or two. It just happened Mon. eve. to both me and a friend fishing there, we couldn't adjust it out, it went away after a while.

Link to comment
Share on other sites

Another vote for Zoo Plankton. Two of the lakes that I fish quite regularly has this happen. Normally it is about a 1/2 hour- 1 hour after sunset. It is very annoying to try and make out your jig in the midst of all that junk, however, you can still see the red lines of fish in the mess. The hard thing is knowing where your jig is in the whole scheme of things.

The best advice I could give you is to switch to a bait that has a wide profile, so you can adjust your gain to the lowest setting possible.

CA

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.