Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

CD Player 03 Ford Truck wont play. "Bad Disk"


LaZyDayZ

Question

My cd player recently stopped working. At first it would not play burned cd's now it wont play anything.

I put a disk in and it looks at it for a minute then kicks it out with a screen message of "Bad Disk"

I have sprayed it out with compressed air. Bought a decent cd cleaner but even putting the cleaner in it says bad disk.

I noted the direction I had the cd in when inserted it and when it ejects with "bad disk" message the disk is in a different position leading me to believe it is spinng.

Any suggestion?

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

Not worth taking in to get fixed cuz you can buy a new one at best buy or circuit city for $100 plus a mounting kit for about 20 and a wire harness for 20 and you get free install. just my .02 Good luck J.P.

Link to comment
Share on other sites

  • 0

I waould say its broke. The cheapest alternative would be to replace with aftermarket as mentioned above. But why stop at a new Radio? A couple of amps some 12" subs, new mids and tweeters, and might as well update those 6"rounds in the door! As long as that is done might as well get your self a custom interior, 27 monitors, custom paint, 24" color matched wheels with spinners, and a strut grill! grin.gif

Seriously though, give the guys at dealer automitive services a call (DAS). I think they are located in Roseville. If your interested in repairing or finding out if it can be fixed.

Link to comment
Share on other sites

  • 0

I would just replace it with a newer type. I have one that plays MP3s recorded on CD, one disk has over 160 songs, I can sing from my house to Kansas City and back..... grin.gif

Link to comment
Share on other sites

  • 0

If it's a cheaper model stock radio, watch hsolist. There's always people on there dumping their stock radios after they buy an aftermarket one, which I don't understand.

Why wouldn't you keep the stock radio and put back in when you sell the vehicle??

Anyways, sometimes you can pick up a stock one for $20-30, especially the lower end stock radios.

Here's a link to "Ford cd radio" on hsolist..

[Please read forum policy before posting again, Thank you]

Also, I had a 1999 F-350, so I'm not sure if your radio is still the same or not. It had a safety deal on it, where there's 2 little holes on each side of the radio, 2 on the left, 2 on the right.

Basically Ford sells a little tool that you put in there so it'll pop the pins so you can pull the radio out. The trick is, just use a wire coat hanger, where you bend 2 pieces of wire in a "U" and can put in the holes, then you can slide your radio out, IF you're in that same situation.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.